English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 23 August 2008, 06:08   #1
jolly11
Registered User
 
Join Date: Oct 2007
Location: Mars
Posts: 183
Problem with my a500

My Amiga 500 stopped to work correctly. Never had a single problem before. It's expanded to 1mb.
Games that worked - lotus 3, jaguar, f1gp, sensible soccer.. - today don't work. They start to load, but then the system crash with random screen or with guru meditation / software failure.
Only a few games work correctly (indianapolis 500, test drive 2).
So, any ideas?
jolly11 is offline  
Old 23 August 2008, 10:11   #2
fc.studio
Cat lover
 
fc.studio's Avatar
 
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
It could be a memory problem. Try to remove and re-install the RAM expansion board. Try to clean the RAM board and the Amiga connector before connecting them again.
To be sure check all memory with any test memory tools.
fc.studio is offline  
Old 23 August 2008, 10:42   #3
Paul_s
Registered User
 
Paul_s's Avatar
 
Join Date: Nov 2006
Location: Amigaville
Age: 46
Posts: 3,338
As said check the memory expansion board - does it have an onboard battery? Check the condition of that too - might've leaked

It's not the end of the world though if it is that, they can be had for very little money these days.
Paul_s is offline  
Old 27 August 2008, 01:55   #4
jolly11
Registered User
 
Join Date: Oct 2007
Location: Mars
Posts: 183
You're right, I think definitely it's the expansion board.
With the ram expansion board installed, I have a lot of strange error, and every single game crashes.
Without the ram expansion, my Amiga works correctly.
jolly11 is offline  
Old 27 August 2008, 02:23   #5
rkauer
I hate potatos and shirts
 
rkauer's Avatar
 
Join Date: Oct 2007
Location: Sao Leopoldo / Brazil
Age: 58
Posts: 3,482
Send a message via MSN to rkauer Send a message via Yahoo to rkauer
Open and take out the thin who is around your A501 (I suppose that's the expansion, since you didn't mention it). Look in the battery area.

I bet the battery corroded a vast area of the little board. Don't worry, I have one A501 I was think trashed. I simply take the battery out, clean the mess and put a CR2032 (with the obligatory diode) and it work again.
rkauer is offline  
Old 27 August 2008, 02:55   #6
Eclipse
Turpentine
 
Eclipse's Avatar
 
Join Date: Oct 2007
Location: Kent, United Kingdom
Posts: 744
Where are you located, your avatar says Mars but somehow I think that's incorrect.
If you are then Mars is covered by Iron Oxide (hence the redness) and has an atmosphere of carbon dioxide and low gravity. It also has no internal dynamo like Earth so doesn't have a strong magnetic field protecting it from harmful radiation from the Sun.
All these things are not good for an Amiga.
Eclipse is offline  
Old 27 August 2008, 03:22   #7
jolly11
Registered User
 
Join Date: Oct 2007
Location: Mars
Posts: 183
lol
well, the ram expansion board (similar to a501 but not original) looks good, no battery leak. maybe one (or more) chip ram soldered in the expansion board doesn't work
jolly11 is offline  
Old 27 August 2008, 03:30   #8
rkauer
I hate potatos and shirts
 
rkauer's Avatar
 
Join Date: Oct 2007
Location: Sao Leopoldo / Brazil
Age: 58
Posts: 3,482
Send a message via MSN to rkauer Send a message via Yahoo to rkauer
Remove the battery and try again.
rkauer is offline  
Old 27 August 2008, 03:32   #9
Eclipse
Turpentine
 
Eclipse's Avatar
 
Join Date: Oct 2007
Location: Kent, United Kingdom
Posts: 744
Any good with a soldering Iron?
It would probably be an easy fix if it's just corrosion or battery leakage.

EDIT: Sorry just noticed you said it's not leaked. Do what rkauer advised. Check for dry joints as well.

Last edited by Eclipse; 27 August 2008 at 03:34. Reason: D'oh
Eclipse is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
RAM problem with my A500 Lobotomika support.Hardware 2 01 November 2010 19:55
A500 Boot Problem scrappysphinx support.Hardware 2 07 March 2008 10:31
A500 Keyboard Problem jonzo support.Hardware 5 10 October 2007 14:08
A500 problem Henk_Glimlach support.Hardware 12 30 October 2005 14:50
A500 lha problem sw2001 support.Apps 12 03 October 2004 13:28

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 02:35.

Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Page generated in 0.07981 seconds with 12 queries