|
21 May 2017, 23:31
|
#1 |
|
Registered User
Join Date: Mar 2016
Location: RJ, Brazil
Posts: 66
|
Chinon FB-354 Floppy on Amiga 500
I got a Chinon FB-354 Floppy Drive from an Atari ST and put this on my Amiga 500. The drive is modified as I can see. So, on the Amiga 500, when you turn the computer on, it tries two times to find a disk inside the floppy (but there is no disk inside) and then go to the HAND LOGO screen. If you put the disk, it won't load. But, if let the disk inside and restart the Amiga, the drive will read it perfectly. I think I need to enable the disk change on this floppy. Any idea where it is? I tried to find some info on the internet but nothing. Only for FB-357. Thanks!
Those are the modifications that are on the drive: 
|
|
|
22 May 2017, 06:34
|
#2 |
|
Registered User
Join Date: Mar 2016
Location: RJ, Brazil
Posts: 66
|
SOLVED! After remove this, the DC is back!
|
|
|
|
22 May 2017, 21:36
|
#3 |
|
Registered User
Join Date: Sep 2007
Location: Stockholm
Posts: 4,348
|
Ah, that's because it was from an Atari ST and had been hacked accordingly.
The ST uses the write protection sensor in lieu of the real diskchange signal. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A4000 and Chinon FB-354 | Turran | support.Hardware | 6 | 01 June 2013 11:03 |
| FREE AS-IS Internal A500 Chinon FB-354 Floppy Drive - USA | hoptoit | MarketPlace | 0 | 24 November 2010 08:35 |
| Chinon FZ-354 (A1200 floppy drive) with Catweasel MK4 | 8bitbubsy | support.Hardware | 3 | 10 October 2010 00:22 |
| Chinon FZ-354 | THX1138 | support.Hardware | 25 | 18 May 2005 00:41 |
| [FA] Floppy Drive CHINON FB-354 for Amiga | scan_x | MarketPlace | 0 | 07 April 2004 18:38 |
|
|
