![]() |
![]() |
#1 | |||
hastala vista winny vista
|
Blizzard 1220 RAM project
I've been tinkering with my 1220 last night to figure out how the RAM is organised. Maybe some of you know, this board has 4 mb onboard, and an optional RAM board exists to make it to up 8 mbs. To my relief it's not very complicated, I think I figured out how to install the second 4 mb.
Here's what I've found out for parties interested : the RAM is organised as 8 1mx4 chips. here's the pinout of chips. organisation of RAM chips : Quote:
Quote:
Quote:
This RAS is tied to a pin on one of the GALs. Curiously the next pin on the GAL is connected to Mystery pin #1. So I take this is the RAS line for the expansion RAM. Mystery pin #2 is a little bit more complicated. It's tied to GND via 472 smd resistor. When checking the pics at AHD it seems it's connected to the jumper block on the RAM expansion board. http://amiga.resource.cx/photos/phot...res=hi&lang=en http://amiga.resource.cx/photos/phot...res=hi&lang=en so I was thinking this is some kind of enable pin for expansion RAM. if it's low the memory controller don't check for expansion RAM, but it's high (probably shorted to VCC on the exansion board via jumper) memory controller checks for expansion RAM. I would like to have some opinions though before I see the magic smoke rising from my 1220 ![]() any thoughts ? ![]() |
|||
![]() |
![]() |
#2 |
Amiga is my Religion
Join Date: May 2005
Location: Germany
Posts: 578
|
I did an 4 MB Addon Board already. There will be a production run soon. So if you want such a board just let me know.
|
![]() |
![]() |
#3 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
@Coze
looking at those pinouts I do belive that you could piggy-back the RAM chips and just tie-up a new RAS to the legs of them to the expansion port. you would need to change the jumper on the board for 8mb though =D @DJBase interesting, have you got some pics of your adapter? and sources you would like to share? |
![]() |
![]() |
#4 |
Amiga is my Religion
Join Date: May 2005
Location: Germany
Posts: 578
|
All I can show by now is the layout...
|
![]() |
![]() |
#5 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
Looks like you spent a bit of time on that,
I have to admit I do enjoy seeing your work, very professional =D |
![]() |
![]() |
#6 |
Amiga is my Religion
Join Date: May 2005
Location: Germany
Posts: 578
|
I like it professional so I always do my best
![]() |
![]() |
![]() |
#7 |
hastala vista winny vista
|
yup it looks great
![]() ![]() having said that, does anyone know a good cheap kit to check RAM chip functionality ? |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2006
Location: Amigaville
Age: 46
Posts: 3,338
|
|
![]() |
![]() |
#9 | |
Registered User
Join Date: Jul 2006
Location: Birmingham UK
Age: 43
Posts: 214
|
Quote:
alternatively you might be able to attach a test socket in place of one of the chips on a known good simm and use an old 486 motherboard with memtest86 as a test rig. |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blizzard 1220 ADD4 RAM expansion | vcheck | MarketPlace | 0 | 01 August 2011 22:06 |
FS: Blizzard 1220 MK IV | ami_junkie | MarketPlace | 12 | 14 April 2010 13:16 |
Blizzard 1220 card | ami_junkie | support.Hardware | 14 | 09 March 2010 14:29 |
Blizzard 1220/4 | hughie | support.Hardware | 1 | 27 February 2005 02:14 |
deactivate Blizzard 1220/4 ??? | PiCiJi | support.Hardware | 1 | 05 October 2004 09:34 |
|
|