![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2019
Location: Fort Collins, CO USA
Posts: 60
|
Expansion Board Diagnostics Status on A2286
So I have a A2286 bridge board that pops up the Expansion Board Diagnostics screen when the machine is powered up. The status of the board is 'Shut', which I'm afraid to say, my google-fu seems to turn up no information about. I thought that 'Dfct' was the status message when a board was bad? Any suggestions for where I can start with troubleshooting this?
|
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2019
Location: Fort Collins, CO USA
Posts: 60
|
Hrm. Okay, so it turns out there were some issues with a memory expansion board. Reconfiguring some jumpers on that has the status on the Bridgeboard set to 'OK', but now it's the classic 'Can't load Janus.library' issue. One step forward, two steps back.
![]() |
![]() |
![]() |
#3 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Shut means it was told to shut up during the autoconfigure process. I understand from the second post that you didn't have enough Zorro 2 RAM free for the bridgeboard?
|
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2019
Location: Fort Collins, CO USA
Posts: 60
|
I don't think it's a memory issue. I have 2 MB of chipram and 112 MB on a BigRAM 2630.
To take the A2630 / BigRAM out of the equation, I also tried removing the A2630 completely, stuck in a SupraRAM with 6 MB, and tried to see if I could get it to run from the base 68000. That had the same 'Can't load Janus.library' message when I tried to run the various bridge board utilities. |
![]() |
![]() |
#5 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
If you have an a2630, are you also running enforcer or mmu libs?
|
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2019
Location: Fort Collins, CO USA
Posts: 60
|
Yeah, enforcer gets added to Startup-Sequence as part of the Janus software installation.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why isn't my A2000 loading Janus.library? (A2286 board) | klokwirk | support.AmigaOS | 34 | 01 August 2023 20:27 |
OS4 compatible UAE expansion development status | Toni Wilen | support.WinUAE | 486 | 09 September 2021 19:58 |
What is this expansion board? | Sanxion | support.Hardware | 7 | 10 September 2017 21:46 |
What kind of expansion board is that ? | salocinx | Hardware pics | 12 | 01 January 2015 09:29 |
Tell me about my expansion board. | gazj82 | support.Hardware | 7 | 22 March 2014 23:25 |
|
|