25 June 2012, 21:12 | #1 |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
Format cfcard block 0 error on win7 under winuae
Dear Friends i am freaking out, i always formated cfcard on my other laptop with win vista and card reader now on my new one, and on the desktop ,with the card reader i can´t format it , when in hdtool low format drive appears message error on block 0 erase all partitions,
i know i am doing everything ok - disableharrdrvesafety check ,format fat and what i think is going wrong is that on winuae adding the cfcard shows drive letter n/a ,also using IDE0 on add harddrive does anybody had this issue ??? Last edited by rampartsagain; 26 June 2012 at 17:47. |
25 June 2012, 21:19 | #2 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
hi mate have a look at my guides in my sig the sfs 1 show how to remove the partitions from the cf and how to setup
|
25 June 2012, 21:24 | #3 |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
|
25 June 2012, 22:12 | #4 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
sfs cf guide http://eab.abime.net/showthread.php?t=61048 cwb3.9 guidehttp://eab.abime.net/showthread.php?t=61180
yes mate it in every post i do at the bottom use sfs ver 2 |
25 June 2012, 22:20 | #5 | |
Registered User
Join Date: Dec 2010
Location: Norway
Posts: 830
|
Quote:
(And you never need to do a low level format on flash media. Not even a full format, just use quick format.) |
|
25 June 2012, 23:40 | #6 |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
i cleaned with disk part but card became windows ghosted
|
26 June 2012, 00:12 | #7 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
hi to use in the amiga the cf needs nothing on it and windows will not see it. you need to set it up now for amiga use see the rest of my guide.
|
26 June 2012, 02:00 | #8 |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
thanks johnim i will do it now i am on work as soon as i can i will do it must be some configuration ,others say is the usb card reader the true is that with my last card reader and win vista all worked exccellent but reader broked and now i have a new one ,something missing me ......
|
26 June 2012, 17:39 | #9 |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
JESUS i am the man i found the problem guys thanks for the help but i used a utility hdd low level format and it worked
the best of it is free formated went to the emu and when in hdtoolbobox made a amiga low level format and no message reboot quick format and voila ,please pass message to all Thanks guys for the help and thanks to me no more hair pullouts edit:but first of all i had formated uder windows as fat then used hdd low level format util |
26 June 2012, 23:36 | #10 |
Registered User
Join Date: Dec 2010
Location: Norway
Posts: 830
|
Glad you got it working, but there is no need to tell anyone about that particular procedure, for the following reasons:
1: There is no such thing (technically) as a low level format of a CF card. Always use quick format, especially with empty flash media. Writing to every block with a full format will make every block 'used', and the cards wear-leveling mechanisms will become less effective from that point on. (Also, the amiga OS format function fails when doing a full format above a drive's first 4GB.) 2: You could have successfully mounted the card in WinUAE after using diskpart. I's supposed to be ghosted in Windows, that's the whole point. WinUAE denying your write attempts is a security feature to avoid people damaging their windows partitions from amiga OS. Boa noite! |
26 June 2012, 23:47 | #11 |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
hihihhi Boa Noite for you too
i think it really was the low format level under windows ,that in my opinion formated all the info in the card ,format under normal windows kind of have always info inside about fat and fat32 transfer speeds size limit and when in hdtool try to format it says already got partitions under block 0 ,but i think this thread should be usefull to others big hugh for you fgh for your mail |
27 June 2012, 05:21 | #12 |
Registered User
Join Date: Dec 2009
Location: Melbourne/Australia
Posts: 226
|
Be careful. Some cards that behave like this are fake. They appear to work well for a while then strange errors and data loss occur.
|
27 June 2012, 08:37 | #13 |
Registered User
Join Date: Dec 2010
Location: Norway
Posts: 830
|
Some cards are indeed fake, but the 'error' encountered here was the safety feature of WinUAE to disallow writes to drives with active windows partitions, nothing else.
Rampartsagain: Yes, your 'low level format' might have unmounted the CF card's partitions, but again this is a terrible way to do it. Next time just clean the card with diskpart. |
27 June 2012, 08:50 | #14 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
Actually that error is not exactly WinUAE safety feature, it only checks if write attempt succeeded.
Windows does not allow direct write access if drive has active PC partition tables. EDIT: Before this check was introduced hdtoolbox would return some strange error which was even more confusing. |
27 June 2012, 11:55 | #15 |
Registered User
Join Date: Dec 2010
Location: Norway
Posts: 830
|
Ok thanks Toni.
When I read the thread discussing the removal of the disableharddrivesafetycheck option I understood it to be a WinUAE feature, but I happily stand corrected The main points above should remain valid.. |
27 June 2012, 11:57 | #16 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
disableharddrivesafetycheck would not have helped. It only allowed WinUAE to attempt write accesses, even if drive has mounted NTFS partitions.
Windows would still not have allowed it |
28 June 2012, 04:13 | #17 | |
Registered User
Join Date: May 2012
Location: Porto/Portugal
Posts: 385
|
Quote:
since that i am more relaxed |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Quartex + WinUAE 2.3 + Win7 | arti | support.WinUAE | 5 | 28 October 2011 23:17 |
Win7 Ultimate x64 WinUAE 2.2 some games don't work | dorfmopp | support.WinUAE | 9 | 14 September 2010 16:56 |
"block zero write failed!" Error message | MoreGrog | support.WinUAE | 5 | 21 July 2010 21:30 |
HELP with winUAE and 64b win7. | UKShark | support.WinUAE | 13 | 05 June 2010 12:12 |
Success: CW3 + Win7 64bit + WinUAE 2.0.1 | arnljot | support.WinUAE | 0 | 29 December 2009 19:29 |
|
|