![]() |
![]() |
#81 |
Registered User
Join Date: Aug 2008
Location: Earth
Posts: 97
|
I'm using a SanDisk CF PCMCIA adaptor. However, the only card I got to work with it is an Integral 1 GB. Neither a Kingston 1 GB nor an Extrememory 4 GB work though. Any special reason why this is?
Thanks in advance, Lenny |
![]() |
![]() |
#82 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,624
|
The newer cards are ATAPI (like CD-ROM) rather than ATA (IDE).
Why? Because ATA doesn't support removable media. I think that the CFD driver could be fixed to work with these cards. SanDisk cards (at least older ones) can be forced to FIXED instead of REMOVABLE using a DOS command line tool ATCFWCHG.COM |
![]() |
![]() |
#83 |
Registered User
Join Date: Aug 2008
Location: Earth
Posts: 97
|
I'm looking for NDCFWCHG.COM. Does anyone have it and would they be so nice as to share it with me? I got hold of ATCFWCHG.COM, but it doesn't work with my card.
Thanks in advance, Lenny |
![]() |
![]() |
#84 |
Posts: n/a
|
I would like to get ahold of both ndcfwchg.com and atcfwchg.com and test those as well...
|
![]() |
#85 |
Registered User
Join Date: May 2008
Location: Mason, Ohio / USA
Age: 48
Posts: 391
|
Anyone had any luck using larger 8 gb + CF cards via the PCMCIA slot?
Thinking of getting an 8 gig Sandisk Ultra II for mod and music storage. The 4 gig one works great, but would like atleast 8 gigs. 16 would be even better. |
![]() |
![]() |
#86 |
Not dead yet!!! :D
Join Date: Feb 2008
Location: Aveiro / Portugal
Age: 42
Posts: 690
|
compactflash.device supports TD64 commands, so I think it should work. Sandisk is an excellent option.
![]() |
![]() |
![]() |
#87 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,624
|
I never found it, but I doubt it would work. From what I have read there is a date code on the side of the cards, for NDCFWCHG.COM to work they need to be older than year 2003, month 1. The code is "AR+YYMM", so 2003, month 1 is "AR0301".
ATCFWCHG.COM is a newer utility for use with "Athens" controller based cards. AFAIK SanDisk has moved to a newer controller which currently has no software to change to fixed. |
![]() |
![]() |
#88 |
Registered User
Join Date: May 2008
Location: Mason, Ohio / USA
Age: 48
Posts: 391
|
|
![]() |
![]() |
#89 |
Not dead yet!!! :D
Join Date: Feb 2008
Location: Aveiro / Portugal
Age: 42
Posts: 690
|
|
![]() |
![]() |
#90 |
Amiga Fetish
Join Date: Dec 2008
Location: Downstate NY
Age: 49
Posts: 269
|
I have IBM Microdrive PCMCIA Card Adapter with IBM Microdrive card on it. Is it supporter by A1200 witn WB 3.1?
|
![]() |
![]() |
#91 |
Registered User
Join Date: Dec 2008
Location: The World!
Posts: 454
|
I just bought a Transcend 8GB.... and
It wont work ![]() I tried Fat and Fat32, as well with only a 1 gig partition.... Is there anything else I could do before i throw it in the bin? OH, btw, sometimes when I remove the CF from the PCMCIA adapter, it gives me the following error, in German! (WTF) DISK " " Zu Fruh Entnommen! wiederholen / abrechen Last edited by Nostromo; 05 February 2009 at 21:19. |
![]() |
![]() |
#92 | |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Quote:
There is some discussion about this error message in this thread: http://eab.abime.net/showthread.php?t=42139 prowler |
|
![]() |
![]() |
#93 |
Registered User
Join Date: Dec 2008
Location: The World!
Posts: 454
|
An update:
Ok - I tried some stuff: PREPCARD: This detects the CF (including its name!), but when I select FORMAT, it says something along the lines of "Disk is write protected". FORMAT: Both CC0: and CF0: are listed but the sizes are weird, like 20k and 0k. Side note: I have IDEFIX installed. Any ideas what I could do to get my CF working? Cheers E'Blue |
![]() |
![]() |
#94 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,665
|
You are not supposed to use PREPCARD.
You have to format your card on the PC using FAT16 or FAT32 Perhaps your 8GB card is just not compatible anyway. I['d use a 4GB Transcend @ 133Mhz. |
![]() |
![]() |
#95 |
Registered User
Join Date: Dec 2008
Location: The World!
Posts: 454
|
|
![]() |
![]() |
#96 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,603
|
Perhaps there is overflow in filesystem handler or device driver causing >=8G cards to fail.
It can't be "usual" incompatibility (card not detected) if prepcard shows name of the card. |
![]() |
![]() |
#97 |
Registered User
Join Date: Dec 2008
Location: The World!
Posts: 454
|
I was reading someone did use a 32GB flash cart without problems.
I have IDE-FIX installed - maybe it has issues? |
![]() |
![]() |
#98 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,603
|
|
![]() |
![]() |
#99 |
Registered User
Join Date: Dec 2008
Location: The World!
Posts: 454
|
I am using OS 3.1. But none of the partitions I created (using the PC) are larger than 4gb.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using a Compact Flash card on a600/a1200 IDE | Smiley | support.Hardware | 744 | 22 March 2023 18:09 |
compact flash pcmcia not working in a1200 | GurjSagoo | support.Hardware | 9 | 02 April 2018 21:01 |
Slow PCMCIA>Compact Flash speeds | radiokida | support.Hardware | 5 | 02 May 2013 17:00 |
Compact Flash PCMCIA on an A600 | sdaonline | New to Emulation or Amiga scene | 3 | 13 February 2011 04:30 |
How To Get A600 To Read Compact Flash Card ? | Rich M | Amiga scene | 5 | 02 May 2005 06:56 |
|
|