21 April 2015, 21:03 | #201 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,567
|
Quote:
(and logs are ALWAYS needed!) EDIT: And what does this have to do with 3.1? There surely is no changes related to your question. (And if there is, as first post says, you should include version which broke/fixed something). Your post lacks all important information. Last edited by Toni Wilen; 21 April 2015 at 21:23. |
|
21 April 2015, 22:32 | #202 | |
Moderator
Join Date: Jun 2009
Location: France
Age: 46
Posts: 1,996
|
Quote:
|
|
22 April 2015, 12:01 | #203 | |
A1200ERC
Join Date: Mar 2009
Location: Germany
Posts: 40
|
Quote:
Is anybody able to save a configfile with the windowed option? Save the config plz and quit the emulator. Then restart WinUAE an run the config. I will wonder if the Emulation starts in windowed mode, likly saved. i´ve tryed all versions down from beta 16 to original v3.0 and it does not work for me! |
|
22 April 2015, 12:11 | #204 |
A1200ERC
Join Date: Mar 2009
Location: Germany
Posts: 40
|
Another way i try´d now.
I use the portable mode and now i have switched it off! Thats it!!! Now i can load all configs and the setting are correct now! That means there must be a little bug in the portable mode. Toni?!? If you wish, i try to make a smal video to demonstrate the fails. |
22 April 2015, 13:13 | #205 |
68k RULEZ
Join Date: Jul 2010
Location: Germany
Posts: 199
|
Try the "Save as..." Button.
|
22 April 2015, 13:57 | #206 |
Registered User
Join Date: Jul 2008
Location: Poland
Posts: 665
|
Alt key stays pressed on emulation side when switching windows.
|
22 April 2015, 14:04 | #207 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,567
|
I think you need a bit more information because normal ALT-TAB "works for me". (fullscreen only? both? Neither? chipset mode or rtg or both?)
(btw, you also forgot to mention if it has anything to do with 3.1 betas..) Quote:
|
|
24 April 2015, 19:18 | #208 |
Registered User
Join Date: Aug 2004
Location:
Posts: 3,349
|
The AdIDE format program's auto-geometry detection routine doesn't work when the IDE CHS heads=16. It does seem to work correctly if heads < 16. [That's much more likely to be a bug in the ICD program than in WinUAE. But it could be useful to know for testing.]
|
02 May 2015, 18:35 | #209 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,567
|
http://www.winuae.net/files/b/winuae_3100b17.zip
Beta 17: - Restrict GUI IDE units to 2 if device is single port and without IDE doubler support. - Added recursive ROM scan option to Paths panel. Currently restricted to 2 directory levels. - HAM-E Plus average pixel calculation bug fixed in hires mode. - "Direct" serial mode and Amiga serial receive buffer is full and program does not clear buffered byte before new byte arrives (uses emulated serial speed): keep waiting until program reads the buffered byte. Previously it was possible to lose received characters in some situations. - Windows 10 TP hack (b13) removed, build 10061 fixed it. RIM_TYPEHID RawInput bug is also fixed in 10061. - VGA autoresolution hires<>superhires switch was unreliable, it didn't set internal "config changed" variable. - If DirectInput device acquire call fails 10 times, ignore the device and stop error logging until all devices needs to be re-acquired (for example focus is lost and regained or GUI is entered and exited) - Entering ROM panel possible crash fixed. - Newtronic Technologies Video DAC 18 RGB port video adapter emulation. (Format encoding information by mark_k) - If programmable hsync or vsync enabled with out of range values: syncs stop, stop also CIA-A (if vsync timed) and/or CIA-B TOD counting. - Archos AVideo 12 emulation. Denise adapter, not AGA compatible, can't be AGA compatible even in emulation due to custom chipset register conflict. (Information by mark_k) - FBcc and FDBcc FPU instruction didn't work correctly in more compatible or cycle-exact modes. - Negative boot priority value was parsed incorrectly when loading config file. Broken when manual HDF geometry support was added - If system has built-in touch screen (for example Intel based Windows 8.1 tablet), >3s touch in top/left corner will open GUI. Added because previously it was impossible to enter GUI without external keyboard. Quick hack only, real touch support may or may not be implemented in future. - Made "Double, fields" default for interlace mode. - Added partial 53C400 SCSI chip emulation (53C400 = 53C80 + integrated buffered "fake" dma support + some PC single chip SCSI integration/compatibility features) - Added Roctec RocHard RH800C SCSI emulation (53C400). Emulation is based on boot disk SCSI format utility behavior, for some reason disk loadable driver won't automount SCSI disks. v2.0 ROM is still MIA. IDE-only (SCSI chip not installed) and IDE+SCSI board subtypes added. - Generate DSKSYN interrupt if DSKSYNC matches zero when DMA is started but before any bits gets transferred. Jukebox 2 / Dreamdealers accidentally (wrong INTREQR bit checked) requires it. |
05 May 2015, 18:40 | #210 |
A1200ERC
Join Date: Mar 2009
Location: Germany
Posts: 40
|
Many many thanks, for recursive romscan and all the other fine new things. Now i´m testing testing... cu. |
05 May 2015, 18:45 | #211 |
Registered User
Join Date: Nov 2014
Location: Italy
Posts: 2,437
|
i'm thinking if winUAE could emulate that x86 card with 286/386 or 486.
So to emulate x86 cpu from emulated 68k cpu. |
06 May 2015, 19:17 | #212 |
A1200ERC
Join Date: Mar 2009
Location: Germany
Posts: 40
|
|
06 May 2015, 19:27 | #213 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,567
|
Quote:
|
|
08 May 2015, 22:14 | #214 | |
Da Digger :)
Join Date: Nov 2008
Location: Monza, Italy
Posts: 2,822
|
Quote:
The x86 cpu was not emulated by 680x0 (as in the Transformer software), it was phisically present . (*) of course it *would be* emulation if implemented in WinUAE. What I'm saying is that the 680x0 cpu wasn't emulating the x86 cpu. |
|
12 May 2015, 18:18 | #215 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,567
|
http://www.winuae.net/files/b/winuae_3100b18.zip
Beta 18: (Official in 2-3 weeks) - Archos AVideo 24 emulation. Animation/doublebuffering feature not yet emulated. Note that AVideo 12 and 24 are not hardware compatible and it is also not AGA compatible, same $dff1fc custom register conflict. (A4000 version not yet emulated, compatible driver/install disk is MIA, latest available is v15 which was released long before A4000 version) - Video DAC 18 and AVideo emulation now works correctly in Double, fields+ interlace mode. - AVideo 12/24 mode autodetection supported. - Improved 53C80 emulation. - Trying to execute MODE SELECT SCSI command in low level scsi emulation mode worked strangely. - Added C-Ltd A1000/A2000 SCSI controller. - Added Preferred Technologies Nexus SCSI controller. Boot ROM added. - Added Expansion Systems DataFlyer 1200/4000 SCSI+. - GUI tab order fixed and updated. - Don't disable Overlays in Filter panel if system has no shader support. Only Masks need it. - Only take internal screenshot when entering GUI if mode is fullscreen DirectDraw. (Entering GUI can cause lost DD surface which would make Screenshot button useless). Delay when opening GUI in some systems should be gone now. (If not DD fullscreen). C-Ltd A1000/A2000: - 53C80 fake DMA. - Non-autoboot, no ROM and no ROM socket. Preferred Technologies Nexus: - 53C80 fake DMA (word wide). - Boot ROM is only a small driver loader, complete driver is stored in RDB's LSEG blocks! - nexus.device, 1G drive size limit. - Partition/formatter utility is strange.. - Has different Fast RAM autoconfig product ID depending on RAM size. DataFlyer 1200/4000 SCSI+: - Connects to A1200/A4000 IDE port, converts it to IDE + SCSI controller. - 53C80 fake DMA (byte wide). - No boot ROM, loadable driver only, can't boot from SCSI drive. - Uses unused IDE control block registers to switch between IDE and 53C80 registers. |
12 May 2015, 19:02 | #216 |
Computer Wizard
Join Date: Aug 2007
Location: Ramberg/Norway
Posts: 928
|
Thank you Toni.
|
13 May 2015, 09:09 | #217 |
A1200ERC
Join Date: Mar 2009
Location: Germany
Posts: 40
|
|
13 May 2015, 10:18 | #218 |
Registered User
Join Date: Dec 2012
Location: Germany
Posts: 561
|
Thanks a lot for the Beta 18, Toni.
You know why. |
15 May 2015, 09:19 | #219 |
Old retro god.
Join Date: Apr 2002
Location: Northolt, West London
Age: 62
Posts: 858
|
|
15 May 2015, 21:31 | #220 |
Registered User
Join Date: Dec 2012
Location: Germany
Posts: 561
|
But to be honest, you watch too much soap operas, Mclane. ; )
P.S. Sorry for my off topic post, Toni! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE 3.0.0 beta series (was 2.8.2/2.9.0) | Toni Wilen | support.WinUAE | 1010 | 15 December 2014 13:41 |
WinUAE 2.4.0 beta series | Toni Wilen | support.WinUAE | 342 | 29 March 2012 09:02 |
WinUAE 2.3.2 beta series | Toni Wilen | support.WinUAE | 79 | 31 May 2011 19:39 |
WinUAE 2.3.0 beta series (was 2.2.1) | Toni Wilen | support.WinUAE | 229 | 22 September 2010 19:20 |
WinUAE 1.6.0 beta series (was 1.5.4) | Toni Wilen | support.WinUAE | 751 | 22 May 2009 07:24 |
|
|