27 June 2022, 02:47 | #1 |
Registered User
Join Date: Jun 2010
Location: UK
Posts: 72
|
Need A1200 Keyboard connector to keyboard matrix pinout
I was doing a recap on my A1200 mainboard and though I tried to be careful and used two layers of Kapton tape around the capacitor that is behind the keyboard connector. I may have damaged the keyboard connector. Or maybe the flimsy keyboard membrane is faulty.
The A1200 mainboard schematic has the keyboard connector but I don't know how the A500\A1200 keyboard matrix connects to the 31 pin A1200 keyboard connector. I need a schematic for that so I can test the one matrix line X7 that is not working. In the meantime I have ordered a new A1200 hard pcb keyboard membrane. |
27 June 2022, 05:07 | #2 |
Registered User
Join Date: Jun 2010
Location: UK
Posts: 72
|
I found a guide at http://sg.aminet.net/docs/hard/A1200KbdMtx.txt The X7 matrix line works if I use a jumper wire between pin 4 and some others on the underside of the mainboard where the keyboard connector is soldered.
Last edited by Stardust; 27 June 2022 at 05:19. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Programmable Keyboard Matrix | Charlie | support.Hardware | 4 | 23 March 2010 13:40 |
cdtv keyboard pinout | jolly11 | support.Hardware | 8 | 01 November 2008 20:05 |
A4000T keyboard pinout | Michaelm | support.Hardware | 4 | 24 November 2006 14:48 |
Wanted: The moving retainer of the A1200 keyboard connector... | keropi | MarketPlace | 6 | 17 July 2006 19:09 |
Decent A1200 Keyboard Connector | CodyJarrett | support.Hardware | 2 | 06 December 2001 12:27 |
|
|