25 June 2017, 14:46 | #1 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
USB keyboard adaptor for A500 and more
So I purchased a USb keyboard adaptor for my A500. It supports more models but you'll have to read the product description at the link below for a complete list.
USB Amiga Keybaord Adaptor It was a pretty straight forward install without any documentation. Only the photo on the ebay page to guide you so I took more of my own attached. You remove your 8420A-1 chip and insert the adaptor into it's slot as shown then put your original chip in to the adaptor as shown, connect the wire that comes off the adaptor and optionally replace your keyboard connector. I have both attached for now but will not be using the A500 keyboard once I transplant everything into a full sized tower case. I numbered the attachments to match the order of steps. Except the first one - it's out of order but I wanted to show the adaptor first, I had already removed the chip from mainboard and inserted in to adaptor at this point. Last photo shows a wireless HP keyboard and a quick test of the functionality via shell. Seems to work great. At some point I'll have to check all the key mappings and figure out how they all work in regards to PC->Amiga translation. Then I'll probably order custom keyboard stickers to better match the PC KB keys to Amiga functionality. I should mention that it might be picky. I first tested with a Dell wired USB keyboard and it did not work at all. Turned off Amiga, attached the Wireless HP one instead and it worked. I should also not that it takes a lot of force to get the adaptor seated tight. I was afraid I was going to snap my Amiga in half. But nope, no damage done. |
25 June 2017, 14:47 | #2 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Here's the final image with working adaptor.
|
25 June 2017, 19:02 | #3 |
Zone Friend
Join Date: Aug 2002
Location: Belgium
Age: 51
Posts: 1,296
|
How long did you have to wait for it being shipped?
I ordered 3 adapters on Monday, then got an automated reply back saying: "We just wanna inform you that your order just beeing processed now. Please be patient, status of this order should change shortly!" but we are now Sunday and I haven't hear anything back, and the status on eBay says "No estimate available". |
25 June 2017, 20:00 | #4 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
I ordered it on June 12th and had an expected delivery date of June 30 - July 4.
You will get expected delivery date once it ships and the tracking number is on eBay. A few days for that to update. |
01 July 2017, 00:05 | #5 |
Retro Nuts
Join Date: Aug 2004
Location: London/UK
Age: 53
Posts: 1,184
|
I just ordered one of these for my A1200,I have had no luck fixing my keyboard so glad I am getting it,I do have a usb mouse as well for my A1200,and thats 10 times better than the original mouse..
Last edited by spannernick; 01 July 2017 at 02:14. |
01 July 2017, 14:19 | #6 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Nice, glad to hear it. I'm rather pleased with this purchase.
|
01 July 2017, 14:33 | #7 |
Zone Friend
Join Date: Aug 2002
Location: Belgium
Age: 51
Posts: 1,296
|
just got a shipping confirmation last night. No delivery estimate given.
|
08 July 2017, 15:04 | #8 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
|
08 July 2017, 19:05 | #9 |
Zone Friend
Join Date: Aug 2002
Location: Belgium
Age: 51
Posts: 1,296
|
Collected it today from post office. 3 well packed PCB's
Now need to test it |
09 July 2017, 00:52 | #10 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Sweet.
|
09 July 2017, 15:10 | #11 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 360
|
This is great! So it should work in any Amiga with that style of 8520 CIA, correct? My CDTV would like this
|
09 July 2017, 15:28 | #12 |
Registered User
Join Date: Jul 2017
Location: Brisbane / Australia
Posts: 13
|
Can I please get the model number of that HP wireless keyboard Sinphaltimus?
I've got the A600 version of this adaptor, and can't find a compatible keyboard amongst my collection. All the keyboards on the compatibility list seem easy to buy in Poland, but dead set impossible to buy anywhere else! |
09 July 2017, 17:35 | #13 | |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Quote:
Model number is KBIM Part number is LV290AA http://store.hp.com/us/en/pdp/hp-wir...608&cadevice=c |
|
10 July 2017, 03:14 | #14 |
Registered User
Join Date: Jul 2017
Location: Brisbane / Australia
Posts: 13
|
Outstanding, thanks very much! I can at least find this model on ebay
|
10 July 2017, 04:38 | #15 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Anytime.
|
20 July 2017, 14:16 | #16 |
Registered User
Join Date: Jul 2017
Location: Brisbane / Australia
Posts: 13
|
An update on this. For Australian and South East Asia users, the HP equivalent part number is J8F13AA . It is called the "HP Wireless Classic Desktop". It's AUD$28 from Harvey Norman.
When paired with the electronika4you keyboard adaptor, this is, by far, the best typing performance I've seen on the Amiga so far. Previously I've used the Elbox PC-Key 600, and the 7bit Sum A600 USB Keyboard adaptor and both of them can't keep up with my typing. They either miss characters, or repeat keystrokes. This eletronicka4u adaptor though, keeps up perfectly with no lag and no missed characters! Perfect! |
20 July 2017, 14:18 | #17 |
Zone Friend
Join Date: Aug 2002
Location: Belgium
Age: 51
Posts: 1,296
|
The SUM issue, I had too, but their latest firmware update fixed those issues on my A1200.
|
20 July 2017, 14:56 | #18 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Awesome to hear!
I have a question - where did you get the firmware update? I tried getting to their site from their ebay link when i made my purchase and it didn't work for me. I'd like to get the updated firmware and any documentation i can. It's a bit strange with the key translation so it really took me a while to figure out that CTRL+ALT+DEL reboots the Amiga just like on a PC. Please share sources - thanks! EDIT - well some of the links work now and I got the updater but it appears to be all about a different adaptor. Perhaps later in the video. Anyway, any additional help is appreciated. Last edited by Sinphaltimus; 20 July 2017 at 15:02. |
20 July 2017, 15:04 | #19 | |
Zone Friend
Join Date: Aug 2002
Location: Belgium
Age: 51
Posts: 1,296
|
Quote:
Then click on downloads for the flashtool and firmware. Code:
01:== v.20160619 ====================================================== 02:+ dodanie zapami�tywania stan�w diod LED - Capslock, Numlock, ScrollLock, 03:- usuni�cie powtarzania wci�ni�tych klawiszy, 04:- usuni�cie problemu zwi�zanego z blokowaniem klawisza RESET w CD32 05: 06:+ adding saving LED states for Capslock, Numlock and ScrollLock keys, 07:- bug fix related to pressed keys repeat, 08:- bug fix related to RESET key lock for CD32, 09: 10: 11:== v.20151017 ====================================================== 12:+ dodanie obs�ugi klawiatur firmy Apple (zawieraj�ce HUBa), 13:+ dodanie opcji F10 w ustawieniach adaptera, kt�ra wy�wietla kody wci�ni�tych klawiszy, 14:+ dodanie opcji F12 w ustawieniach adaptera, kt�ra wy�wietla ustawienia adaptera, 15:+ dodanie ustawie� adaptera dla klawiatur Mac przez aktywowanie kombinacj� klawiszy R-Shift + F19, 16:- usuni�cie problemu z obs�ug� klawiszy SHIFT w grach z serii Pinball, 17: 18:+ adding support for Apple's keyboards (including HUB), 19:+ adding F10 option in adapter settings, function displays keycodes, 20:+ adding F12 option in adapter settings, function displays settings, 21:+ adding configuration mode for Mac keyboard, activated R-Shift + F19 key combination, 22:- fix problems with using key Shift and Alt in games of the series Pinball, 23: 24: 25:== v.20150814 ====================================================== 26:- usuni�cie problemu z obs�ug� klawiszy L-Amiga i R-Amiga, 27:+ dodanie zamiany klawiszy R-Amiga z R-ALT w ustawieniach adaptera (opcja F2), 28: 29:- fix problems with using the keys L-Amiga and R-Amiga, 30:+ adding features key changes R-Amiga to R-ALT in the adapter settings (press F2), |
|
20 July 2017, 15:41 | #20 | |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
Quote:
And I see ctrl+alt+del in their listing, and got their update tool but the update instructions and the pdf I got from their site is for the USB mouse adaptor. i sent a msg to the seller. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
usb to db9 adaptor | ransom1122 | support.Hardware | 8 | 20 August 2015 01:26 |
USB adaptor for Amiga Joysticks | Nono Nano | support.Hardware | 4 | 16 April 2011 18:03 |
USB Keyboard on A1200 Tower Using PS/2 to USB Adaptor? | roberthazelby | support.Hardware | 3 | 15 October 2010 22:57 |
Amiga joystick to usb adaptor? | Kitty | Retrogaming General Discussion | 17 | 06 February 2010 21:03 |
PCMCIA to USB adaptor? | Fingerlickin_B | support.Hardware | 5 | 02 August 2008 15:52 |
|
|