Anyone with eprom burner in Australia?

[RichardM]

Need v7 for A590. DMAC is -01 so can't use GURU ROM. I've got the dumps and can probably dig up some 27c64 as well. Usually some on ebay but would rather not ship internationally as if that is the case I might as well buy a burner and do it myself... Let me know when, where and how much, thanks.

[Loedown]

I've got a Willem V5.0 I am willing to sell, they program EPROMS, I'm in Victoria.

[RedskullDC]

Hi RichardM,

Where are you?

I'm in Sydney (lower north shore) if that helps.

Can do 8/16 bit EPROMS, FLASH, etc. etc.

Cheers,
Red

[RichardM]

Thanks for the speedy responses. I'm in Melbourne so will give Paul a call tomorrow as I was looking at purchasing either a Willem 5.0 or a GQ-4X if need be so this sounds perfect.

[kire_online]

I too am doing a A590 v7.0 upgrade in Sydney, but don't have the eprom programmer, looked at both the Willem or GQ-4X.

Can I just rip out the old ROMs and wipe then reprogram ? Or should I just get a new set of 27c256 chips from ebay ?

All up with eraser, programmer, eproms, adapters, etc I'm looking at around $200 for the equipment, not sure if it will ever be used again.

Then I'd need to find a suitable drive plus adapter and short scsi cable.
Is North Rocks computer markets any good for this type of stuff ?

So just looking at other extremely cheap/free options like begging/pleading with someone to just flash my existing eproms to v7.

[Loedown]

Fire an email or PM off to Amigamaniac, he may be able to help you.

[RedskullDC]

Originally Posted by kire_online

I too am doing a A590 v7.0 upgrade in Sydney, but don't have the eprom programmer, looked at both the Willem or GQ-4X.
.

I'm in Lane Cove and can program then for you if you get the eproms.

Futurlec have the 27C256's rather cheap:
http://www.futurlec.com/ICEPROM.shtml

27C256-10027C256 256K 100ns CMOS EPROMYes1$2.90

Since you mentioned North Rocks I guess you aren't too far away?

Cheers,
Red