Anyone tried USB on the TF360 'NOTPORT' ?

[Akiko]

The TF360 for the CD32 has been out for at least a year or two now, so I'm just wondering if anyone has had any success or failures in getting USB working on it's experimental clockport, the original Subway, Subway 2021, Freeway, RapidRoad, etc?

I have so far only tested Amigakit's little Clock/sensor module on it and it works great, although I would really love to invest in a USB solution if it works. Does anyone have experience with the 'NOTPORT', which hardware works and which doesn't?

edit:

Working:
Amigakit clock/temperature module

NOT WORKING:
FreewayCP USB
Prisma Megamix

[AMIGAZ]

*Following*

[cloverskull]

Oh interesting, this never occurred to me but I actually have a spare clockport USB card so I can give this a shot. I'll let you know how it goes, will try to get to this today if I can.

[Akiko]

As mentioned Amigakit's little clock/temperature module is working.

[Akiko]

Freeway clockport is not working on my test, majority of the time the card fails to initialise, however if you keep trying it comes to life and throws this error:

New hardware DEVS:USBHardware/freewaycpusb.device/0 added (FreewayCP)
GET_DESCRIPTOR (lens 8) failed: usb bus offline (1)
SET_ADDRESS failed: usb bus offline (1)
Device enumeration failed, sorry
Root hub enumeration failed. Blame your hardware driver programmer.


A shame as the Freeway is the only card that can still be purchased new that supports Posideon. Please feel free to double check my results as firmware version etc may matter, I have heard a rumour that the original Subway card from E3B works, also need confirmation for Rapid Road and the newer Subway 2021 card that uses the ANAIIS USB Stack.

[Akiko]

Prisma Megamix

Not working, was half expecting this one might work.