26 December 2007, 00:37 | #1 |
Zone Friend
|
New Catweasel Mk IV prob
Hi guys....
Got my Catweasel today.... having loads of probs... Basically this is what happens.. System finds the card on boot!! I point it to the brand new drivers. It starts to install and installs the catw2k.sys then as I hit finish my system freezes and my machine reboots! This will go on all day... I also have another XP installation... happens on that too ( totally different drive etc ) I`ve even taken my card back to bare bones ( ie. no SID chip and no floppy ) ANy ideas? |
26 December 2007, 02:04 | #2 | |
Digital Corruption
Join Date: Jan 2007
Location: Dorrigo/Australia
Age: 60
Posts: 355
|
Quote:
I had the same problem with one of the earlier versions. Had to boot up in safe mode, disable the card, reboot to normal, then 'add new hardware'. Seemed to work ok after that. Red |
|
26 December 2007, 10:30 | #3 |
Zone Friend
|
Well I tried the latest! CWMK42400 and I tried CWMK4020407 both do the same!
EDIT: got it working.. need to check on adf - floppy creation when I get my Amiga setup.. Using Acid64 most tunes slow to a crawl.. if I check or uncheck a box on the main window.. it speeds up again! ?? Last edited by stainy; 26 December 2007 at 14:37. |
30 December 2007, 00:30 | #4 |
Zone Friend
|
Well I`m at an end.. I ended up putting Xp on a new drive... got video, sound and direct x on there.. nothing else bar getting the pc working..
I installed the latest drivers ( no problems ) all works fine.. until I reboot and I`m getting blue screen reboots! balls. Now It`s either a bad card or the catweasel doesn`t like my system somehow.. I have a dual core cpu.. but I was aware that wouldn`t be causing an issue boooo |
30 December 2007, 00:57 | #5 |
Zone Friend
Join Date: Feb 2006
Location: Hertfordshire
Posts: 688
|
Stainey,
Sorry to hear about you catweasel woes. I had exactly the same problem (blue screens if you remember) until I installed 4020407 with imagetool hotfix. This cured everything, but I had to manually install all the CAT files to System32/drivers beforehand. Even after this, the next three or four times I turned the PC on it recognised (the same) new hardware and installed a few more components - if that makes sense. Stick with it. It's a great card which even allows you to play with your amiga joystick using VICE64. Magno. |
30 December 2007, 01:23 | #6 |
Zone Friend
|
Yeah.. I had one before.. no probs.. had different hardware then though!
It installs all the stuff in one go on mine.. both joyports, mouse ports, SID, HID stuff.. it all works ok till I reboot.. then it never boots up until I delete/rename catwea2k.sys |
30 December 2007, 01:28 | #7 |
Zone Friend
Join Date: Feb 2006
Location: Hertfordshire
Posts: 688
|
I don't know bud.
Seems like a conflict between your PC and that particular driver. Sorry I cannot help any further. |
30 December 2007, 11:14 | #8 |
Zone Friend
|
Magno! do you have a core duo cpu ?
Forget that have you used the new imagetool much ? wondering what settings you have it on .. My driver comes out as 5.25" - unit 0 For the life of me I can`t get it to read 3.5" The format underneath drive is ok.. Last edited by stainy; 30 December 2007 at 21:15. |
30 December 2007, 22:53 | #9 |
Zone Friend
Join Date: Feb 2006
Location: Hertfordshire
Posts: 688
|
Screenshot of what my imagetool looks like.
I have no other option apart from 3.5". I do not have a sid chip onboard. Maybe your sid chips make the program default to C64 mode or something, although unlikely. Attachment 15649 Last edited by Magno Boots; 29 February 2008 at 23:25. |
30 December 2007, 23:14 | #10 |
Zone Friend
|
Yeah I have no other option other than 5.25 !! and drive B.. thought it was meant to use Windows driver letter!... hey.. do you have your floppy connected to your motherboard? ie. the Cw in between the two cables ( going to your floppy and going to your mb ? )
|
03 January 2008, 22:31 | #11 | |
Zone Friend
|
Cw
Quote:
Hey! could you possible show me your cw_config.ini ? I`ve had to change some stuff to get it to read 3.5" A drive etc... just like to see another one to check against mine |
|
19 June 2008, 00:58 | #12 |
Registered User
Join Date: Nov 2007
Location: Ipswich / Queensland / Australia
Posts: 56
|
WTB: Catweasel IV
Hi, Is there a current new batch of Catweasel IV PCI cards available yet?
I keep looking on the net to find suppliers but it's not easy to find. I'm in Australia so a US supplier would most likely give the best prices. I saw a MSG a while back where some guy said he was from a place called individual computers and they had them for like US$129. Anyhow, any suggestions where to get the bast prices and availability of stock etc? TNX .-.-. |
22 June 2008, 09:54 | #13 |
Yeah Hup!
Join Date: May 2006
Location: Australia
Age: 54
Posts: 345
|
Yeah I'm wanting some too. One went on ebay last week for over $200US. I emailed Amigakit from their website but didn't get a reply.
|
22 June 2008, 11:18 | #14 |
Registered User
Join Date: Jun 2002
Location: .
Age: 48
Posts: 5,562
|
do remember that catweasels don't work on vista or 64 bits environment, because there are and there will not be drivers!
|
22 June 2008, 11:40 | #15 |
Zone Friend
|
Still having problems with mine.. guess I`ll have to wait till I re-install XP... see if something I`ve installed has stopped it working
|
22 June 2008, 12:57 | #16 |
Registered User
Join Date: Jun 2002
Location: .
Age: 48
Posts: 5,562
|
well i reread the thread and i cannot help you, sadly: on windows XP i need to reinstall the drivers EACH time i want to use it (that means the whole reinstall tour, the 3 passes for the different drivers) and while it works, joystick and all, the amiga disks i try to import, 80% of the time end in broken adfs, even disks i remember i imported fine with ADFread...
|
22 June 2008, 15:21 | #17 |
R.I.P Smudge 18-08-16
Join Date: Aug 2005
Location: Leicester/UK
Age: 66
Posts: 3,968
|
Well if it`s any consolation i have a CW mk3 and it`s the most unreliable piece of kit i`ve ever had.
Anyone wanna buy a CW mk3, keeps you entertained for hours untill the men in the white coats drag you off for a reformat and install |
22 June 2008, 20:58 | #18 | |
Registered User
Join Date: Nov 2007
Location: Ipswich / Queensland / Australia
Posts: 56
|
64Bit compatability??
Quote:
I have a AMD Athlon AM2 4000+ Dual Core. I stuck with normal old XP 32 Home for the Windoze side. But on my Linux partition I went for Sabayon (Gentoo) 64Bit edition. This Catweasel driver issue you speak of is only under Windoze I assume? Anyhow, looking forward to getting one. I have thousands of C64, Vic-20, & Amiga disks here that need to be archived and passed on b4 they are lost. .-.-. |
|
22 June 2008, 22:15 | #19 | |
Registered User
Join Date: Jun 2002
Location: .
Age: 48
Posts: 5,562
|
Quote:
so they will simply not happen. i don't know about Linux, but i suggest you to write yourself to him, as he was very prompt in answering. |
|
22 June 2008, 22:36 | #20 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,534
|
Quote:
XP64 driver will work on Vista64 as long as it is signed. Vista64 added mandatory driver signing. Certificate for signing costs money.. (perhaps they meant certificate costs?) |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CF Prob. | Eclipse | support.Hardware | 10 | 01 May 2008 12:11 |
Not really a prob | amiga | support.WinUAE | 1 | 20 March 2007 20:31 |
Prob with V.1330 | Amigabest | support.WinUAE | 2 | 16 November 2006 11:25 |
Not really a prob | amiga | support.WinUAE | 1 | 25 May 2005 18:53 |
networking prob.. | poppe | Retrogaming General Discussion | 7 | 15 October 2002 23:01 |
|
|