Dynablaster

21 March 2007, 18:13

Hi!
Im playing at this fabolous game with my winuae emulator, but I have this problem, when I choose the single game modality I have infinite bombs and infinite flames, but I wanna disactive it.
How can I do?
Thanks!

Sergio

Belgarath · 21 March 2007, 18:54

It's a problem with the crack you are using, get a different cracked version (read the faq).

DamienD · 21 March 2007, 21:31

Hello corchians,

Welcome to EAB

Hmmm, Dynablaster... As far as I'm aware there are 2 types of cracked versions available for this game:

1) Doesn't have the PAL fix applied so the game / sound jerks.
2) Has the PAL fix applied and trainer. Even though you switch off all trainer options they are still on.

Here's an old thread about it: Dynablaster...

The only solution I have after trying all the cracks that I could get my hands on is to find the .IPF files and then use the hint that dlfrsilver posted in the above thread:

Quote:

Originally Posted by dlfrsilver

I have a hint for those who have a problem with the 60hz NTSC screen mode.

Press BOTH mouse button during game loading, the screen will be in 50hz

I did ask this question ages ago but I'll ask again... Are any of the talented people on this board able to crack the .IPF version and then patch it for PAL Amigas?

That would make my year

dlfrsilver · 21 March 2007, 21:37

i have tried what i said, and it works. The game plays in 50hz under winuae.

dlfrsilver · 23 March 2007, 02:14

Here is a gift from me to you !!!

You want to use the adaptator for Dyna blaster for your amiga with a copy of the original disk version uncracked ? OK peeps, follow my diagram here :

You need the following :

- 1x DB25 MALE
- 2x DB9 MALE

- some courage to make it perfect hehehe

here a PDF i made for you to see how to solder the right wires from DB25 to
the 2 DB9. After that, enjoy

One precision about some wires here :

on DB25, points 1 and 13 use 2 differents wires joining themselves to a third one, to solder on point 6 of DB9 for player 3.
also, on DB25 points 22 and 25 use 2 differents wires joining themselves to 2 wires then splitting and going to point 8 on DB9 player 3 and also point 8 on DB9 player 4.

If a picture is needed ask me

keropi · 23 March 2007, 07:43

what is this "adaptor" ??? it works as a dongle or something???

DamienD · 23 March 2007, 09:57

It's an adapter that allows you to plug in / use 4 joysticks with Dynablaster

musashi5150 · 23 March 2007, 10:51

Quote:

Originally Posted by keropi

what is this "adaptor" ??? it works as a dongle or something???

And the original game won't work without it plugged in - so it acts like a dongle in that respect.

spiff · 23 March 2007, 11:08

Quote:

Originally Posted by dlfrsilver

I did ask this question ages ago but I'll ask again... Are any of the talented people on this board able to crack the .IPF version and then patch it for PAL Amigas?

Quote:

Originally Posted by DamienD

i have tried what i said, and it works. The game plays in 50hz under winuae.

You really should stick to the NTSC version, the speedup compared to pal makes it so much more fun.

Anubis · 23 March 2007, 11:54

Didn't I answer this at LA a day or two before this topic was created?!

Speak of trust...

Isn't PC-Engine's version of Dynablaster the same game?

I remember completing that one long time ago.

DamienD · 23 March 2007, 11:55

Quote:

Originally Posted by spiff

You really should stick to the NTSC version, the speedup compared to pal makes it so much more fun.

Nope, if I do that the game / sound jerks

StingRay · 23 March 2007, 12:22

Quote:

Originally Posted by DamienD

I did ask this question ages ago but I'll ask again... Are any of the talented people on this board able to crack the .IPF version and then patch it for PAL Amigas?
That would make my year

If you can supply the ipf, I can do that.

DamienD · 23 March 2007, 13:10

OMG!!! Would be so awesome if you could do that

Even though I know the "press BOTH mouse button during game loading, the screen will be in 50hz" trick I still had issues when using the .IPF for some strange reason...

The crack with PAL fix + trainer is the only way I can play the game but of course it sucks as all trainer options are always on. Takes the fun out of it...

You are da man

dlfrsilver · 23 March 2007, 13:18

there is no issue, if you have some, then your winuae parameters are incorrect.

DamienD · 23 March 2007, 13:28

Quote:

Originally Posted by dlfrsilver

there is no issue, if you have some, then your winuae parameters are incorrect.

There is a long story with this, I also tried changing refresh rates etc in WinUAE but unfortunately I was never able to get the .IPF working perfectly (even with the mouse button trick)...

There is a thread about all the things I tried somewhere, need to find it though.

It's probably a good idea to have an cracked / PAL .ADF (without forced trainer) anyway for real PAL Amiga users

DamienD · 23 March 2007, 13:38

Here's the old thread Playing NTSC games through WinUAE

Galahad/FLT · 23 March 2007, 13:41

Whos got the IPF file then?

I'm guessing the copy protection isn't just the adaptor/dongle check?

What might be an idea is to have a bootup menu so you can select whether or not you want to play with the adaptor.

DamienD · 23 March 2007, 13:58

Quote:

Originally Posted by Galahad/FLT

Whos got the IPF file then?

Me

...it's NTSC, needs the PAL fix applied though (and whatever else).

dlfrsilver · 23 March 2007, 18:29

the disk is not protected, it just check for the adaptator plugged in parallel port.

PS : do you use Winuae 1.4.1 ? and cycle mode exact ?

I'll give you tonight my config in order for you to run correctly the game.

DamienD · 23 March 2007, 20:01

Quote:

Originally Posted by dlfrsilver

PS : do you use Winuae 1.4.1 ? and cycle mode exact ?

Well these days; yes

The date of the "other" thread was June, 2006 or something. Can't remember what version of WinUAE I was using then (would have been the latest though)...

Thing is that "Dyna Blaster (1991)(Hudson Soft)[cr VF][t +11 ZNT].adf" works perfectly for me no matter what version of WinUAE I'm using (in terms of sound / jerking)... Just the trainer spoils it

Doing the mouse trick with the IPF doesn't. Can't remember exactly why, it was so long ago...

Maybe it would be quicker for somebody to look at the "Dyna Blaster (1991)(Hudson Soft)[cr VF][t +11 ZNT].adf" crack and remove the overriding trainer that is enabled no matter what you select?

Anyway, I'll leave it in "the more that capable" hands of the people who PM'd me. I'm sure they wil know how best to address this

21 March 2007, 18:13	#1
corchians Posts: n/a	Dynablaster Hi! Im playing at this fabolous game with my winuae emulator, but I have this problem, when I choose the single game modality I have infinite bombs and infinite flames, but I wanna disactive it. How can I do? Thanks! Sergio

23 March 2007, 02:14	#5
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,425	Here is a gift from me to you !!! You want to use the adaptator for Dyna blaster for your amiga with a copy of the original disk version uncracked ? OK peeps, follow my diagram here : You need the following : - 1x DB25 MALE - 2x DB9 MALE - some courage to make it perfect hehehe here a PDF i made for you to see how to solder the right wires from DB25 to the 2 DB9. After that, enjoy One precision about some wires here : on DB25, points 1 and 13 use 2 differents wires joining themselves to a third one, to solder on point 6 of DB9 for player 3. also, on DB25 points 22 and 25 use 2 differents wires joining themselves to 2 wires then splitting and going to point 8 on DB9 player 3 and also point 8 on DB9 player 4. If a picture is needed ask me Last edited by dlfrsilver; 13 February 2008 at 21:26.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynablaster	steve88	support.Games	42	25 November 2019 18:53
Dynablaster up and running	steve88	Amiga scene	15	05 January 2008 18:06
Dynablaster...	DamienD	request.Old Rare Games	29	27 March 2007 12:04
Dynablaster	mtb	support.Games	3	05 November 2002 21:19
DynaBlaster	cosmiq	support.Games	9	13 June 2002 09:08

21 March 2007, 18:54	#2
Belgarath HOL Team Member Join Date: Dec 2001 Location: Manchester Posts: 2,515	It's a problem with the crack you are using, get a different cracked version (read the faq).

21 March 2007, 21:37	#4
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,425	i have tried what i said, and it works. The game plays in 50hz under winuae.

23 March 2007, 07:43	#6
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	what is this "adaptor" ??? it works as a dongle or something???

23 March 2007, 09:57	#7
DamienD Banned Join Date: Aug 2005 Location: London / Sydney Age: 47 Posts: 20,420	It's an adapter that allows you to plug in / use 4 joysticks with Dynablaster

23 March 2007, 11:54	#10
Anubis Retro Gamer Join Date: Jan 2005 Location: Underworld Age: 51 Posts: 4,061	Didn't I answer this at LA a day or two before this topic was created?! Speak of trust... Isn't PC-Engine's version of Dynablaster the same game? I remember completing that one long time ago.

23 March 2007, 13:10	#13
DamienD Banned Join Date: Aug 2005 Location: London / Sydney Age: 47 Posts: 20,420	OMG!!! Would be so awesome if you could do that Even though I know the "press BOTH mouse button during game loading, the screen will be in 50hz" trick I still had issues when using the .IPF for some strange reason... The crack with PAL fix + trainer is the only way I can play the game but of course it sucks as all trainer options are always on. Takes the fun out of it... You are da man

23 March 2007, 13:18	#14
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,425	there is no issue, if you have some, then your winuae parameters are incorrect.

23 March 2007, 13:38	#16
DamienD Banned Join Date: Aug 2005 Location: London / Sydney Age: 47 Posts: 20,420	Here's the old thread Playing NTSC games through WinUAE

23 March 2007, 13:41	#17
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 50 Posts: 9,004	Whos got the IPF file then? I'm guessing the copy protection isn't just the adaptor/dongle check? What might be an idea is to have a bootup menu so you can select whether or not you want to play with the adaptor.

23 March 2007, 18:29	#19
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,425	the disk is not protected, it just check for the adaptator plugged in parallel port. PS : do you use Winuae 1.4.1 ? and cycle mode exact ? I'll give you tonight my config in order for you to run correctly the game.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)