27 April 2020, 13:28 | #3881 |
Professional slacker!
|
Can anyone recommend a Video player that works on Sonnet? I know Riva is 68k only (unless someone has done a PPC port?)
I think I have a CD of MooVid somewhere I'll try that see if that was PPC. Cheers |
27 April 2020, 13:57 | #3882 |
Registered User
Join Date: Jan 2020
Location: UK
Posts: 108
|
Hi, I now have my Emerson PRPMC8005E Processor PMC Module and the ramix carrier. I;m sure I read on here somewhere that I need to set a jumper on the 2nd row in from the edge of the Emerson board. These are really small jumpers ( that I haven't got! ) What size are they? and where to buy other than China?
Thanks. Last edited by utukku; 27 April 2020 at 14:07. |
27 April 2020, 14:10 | #3883 | |
Registered User
Join Date: Dec 2017
Location: Rzeszów
Posts: 404
|
Quote:
AMP2 (AMP2 beta can play 3vix), and FroggerNG. The fatest is AMP2 beta |
|
27 April 2020, 14:26 | #3884 |
Registered User
Join Date: Dec 2017
Location: Rzeszów
Posts: 404
|
We have new WarpJPG
Installation: Instalator say that i have WarpOs 4, required is WOS 5, so I can't install WOS version. Solutions Just find in install scrips text: "(set #warpos 0)" and set 1, like that: (set #warpos 1) After that, installers script will work :-) BTW If I make test on picture: 1280x1012 24-bit colour, 148387 bytes like in the site: https://www.warpdt.co.uk/jpeg.php "visage test.jpg nojpeg time test" I have result on Ragnarok 800 mhz, about 4.00s In the table on site, autor has 0.58 on Blizzard PPC 240Mhz + BVision and CGFX. On 68k - 060 50Mhz he has about: 2.29 On real, displaying jpg picture is about twice faster by Ragnarok than my 060, but results in visage test are strange. |
27 April 2020, 15:34 | #3885 |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
So Finally got BlitzQuake to work on my A4000 Apocalypse Build, after always getting a grey screen on start up, found out I wasn’t using the latest version in the end
Here is a timedemo https://drive.google.com/file/d/1Y8g...w?usp=drivesdk Not bad on a voodoo not getting the fps that I seen on previous post but I’m just happy it’s working the video shows it running in a 800x600 resolution |
27 April 2020, 15:41 | #3886 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,346
|
is it stable? can you leave it running the demo loops for 60+ mins without crashing?
|
27 April 2020, 15:43 | #3887 |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
Sonnet 7200 PCI programming
|
27 April 2020, 17:51 | #3888 | |
Registered User
Join Date: Dec 2018
Location: Helmsdale Scotland
Age: 41
Posts: 181
|
Quote:
|
|
27 April 2020, 17:57 | #3889 |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
|
27 April 2020, 19:52 | #3890 |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
So after playing with MMULibs, I think I'm on the right track with my A4000 Apocalypse Build.
here is my MedReport/ShowConfig/Startup-Sequence/User Startup & my MMU-Configuration File. If one of you Gurus wouldn't mind having a look through and see if you agree with my setting or any tweaks I should implement that would be great. MedReport Code:
*** Envarc: variable settings: *** MMU = No, previous setting: No NoCache = Not Set, previous setting: Not Set Emulation = Not Set, previous setting: Not Set Buster = 11, previous setting: 11 RadeonMem = 32, previous setting: 32 RadeonMemOS = Yes, previous setting: Yes VoodooMem = 10, previous setting: 10 VoodooMemOS = Yes, previous setting: Yes VoodooInt = No, previous setting: No VirgeMem = Not Set, previous setting: Not Set VirgeInt = Not Set, previous setting: Not Set Warp3D = No, previous setting: No PPCPCI = Not Set, previous setting: Not Set Gfxaddr = Not Set, previous setting: Not Set Force = Not Set, previous setting: Not Set Terminator = Not Set, previous setting: Not Set Memsize = Not Set, previous setting: Not Set FastEthernet = Not Set, previous setting: Not Set tv.prefs file name = Not Set, previous setting: Not Set Tuner = Not Set, previous setting: Not Set Background = Not Set, previous setting: Not Set SpiderBuf = 5, previous setting: 5 *** Mediator System Files versions: *** pci.library - ver.13.10 (12192 bytes) MediatorNET.device - ver.2.10 (6176 bytes) Radeon.card - ver.2.23 (16976 bytes) Voodoo.card - ver.4.35 (15072 bytes) Virge.card - ver.1.13 (12064 bytes) Vendors.txt - ver. info N/A (1188574 bytes) MedConfig - ver.2.4 (127642 bytes) *** Mediator Multimedia CD Files versions: *** FastEthernet.device - ver.1.25 (7024 bytes) mixer.library - ver.1.11 (4016 bytes) fm801.audio - ver.4.14 (4156 bytes) FM801 - ver. info N/A (1180 bytes) sb128.audio - ver.4.20 (6336 bytes) SB128 - ver. info N/A (2032 bytes) SBMixer - ver.1.4 (2004 bytes) tv.library - ver.4.13 (10304 bytes) TV - ver.1.4 (1956 bytes) tv.vhi - file N/A *** Spider Files versions: *** poseidon.library - ver.4.5 (114508 bytes) spider.device - ver.3.21 (18560 bytes) DriveSpeed - ver.1.7 (2024 bytes) *** Warp 3D files versions: *** Warp3D.library - ver.4.2 (67648 bytes) Warp3DPPC.library - ver.4.2 (101020 bytes) *** Warp 3D for A3/4000 files versions: *** W3D_Picasso96.library - ver.4.2 (39216 bytes) W3D_Picasso96_PPC.library - ver.4.2 (21036 bytes) W3D_AvengerBE.library - ver.4.2 (295716 bytes) W3D_AvengerBE_PPC.library - ver.4.2 (392596 bytes) W3D_AvengerLE.library - ver.4.2 (282312 bytes) W3D_AvengerLE_PPC.library - ver.4.2 (359436 bytes) *** MMU Warp 3D for A1200 files versions: *** W3D_Picasso96MU.library - file N/A W3D_AvengerBEMU.library - file N/A W3D_AvengerLEMU.library - file N/A *** NO_MMU Warp 3D for A1200 files versions: *** W3D_Picasso96M.library - file N/A W3D_Picasso96M_PPC.library - file N/A W3D_AvengerBEM.library - file N/A W3D_AvengerBEM_PPC.library - file N/A W3D_AvengerLEM.library - file N/A W3D_AvengerLEM_PPC.library - file N/A *** Other files versions: *** AmigaOS ROM Update - ver.44.57 (321768 bytes) rtg.library - ver.40.3992 (217988 bytes) emulation.library - ver.40.389 (39652 bytes) Picasso96API.library - ver.2.300 (24520 bytes) ahi.device - ver.5.6 (58416 bytes) 68040.library - ver.43.0 (692 bytes) 68060.library - ver.46.4 (65128 bytes) warp.library - ver.5.1 (21288 bytes) ppc.library - ver.46.41 (70148 bytes) powerpc.library - ver.17.12 (73500 bytes) mmu.library - ver.46.18 (47032 bytes) *** Other files versions: *** scsi.device - ver.43.43 (-1 bytes) 2nd.scsi.device - ver.60.400 (-1 bytes) FastATA.driver - ver.3.1 (4608 bytes) ATA3.driver - file N/A 4xEIDE.driver - file N/A Cocolino.driver - file N/A eFlasher - ver.1.8 (3864 bytes) model - , gfx - , zorro - , pcmcia - , serial - , ppc - , mmu030 - , mmulib - , nocache - , emulation - , warp3d - , pci - . Code:
Startup-Sequence: C:CheckLMB IF WARN SYS:Prefs/FastATAPrefs ENDIF C:FastATA.driver QUIET ;ClassicWB Startup-Sequence ;-------------------------- ;OS39 ;Start OS3.9 Checks IF EXISTS C:SquirrelSCSI C:SquirrelSCSI EndIF Set SCSIUpdate 1 IF EXISTS C:IDEFix C:IDEFix Set SCSIUpdate 0 EndIF IF EXISTS SYS:Expansion/XSurfIDE Set SCSIUpdate 0 EndIF IF EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE Set SCSIUpdate 0 EndIf IF $SCSIUpdate EQ 1 C:SetPatch QUIET ELSE C:SetPatch SKIPROMUPDATES "scsi.device" QUIET EndIF Unset SCSIUpdate ;End OS3.9 Checks C:GetMouseInput LOCAL IF $MouseInput EQ 1 Unset MouseInput C:Assign >NIL: ENV: RAM: C:Assign >NIL: T: RAM: C:Execute S:Maxmem-Sequence EndCLI >NIL: EndIF IF $MouseInput EQ 2 Unset MouseInput C:Execute S:Bootmenu-Sequence EndCLI >NIL: EndIF Unset MouseInput IF EXISTS C:StackAttack C:StackAttack EndIF C:Version >NIL: FailAt 21 IF EXISTS SYS:WBstartupD C:Rename >NIL: SYS:WBStartup SYS:WBStartupM C:Rename >NIL: SYS:WBStartupD SYS:WBStartup EndIF Resident >NIL: C:IconX PURE Resident >NIL: C:WBRun PURE Resident >NIL: C:Assign PURE Resident >NIL: C:Execute PURE Resident >NIL: C:SetEnv PURE REPLACE IF EXISTS L:env-handler C:MakeDir RAM:T RAM:Clipboards L:env-handler ELSE C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ Assign >NIL: ENV: RAM:ENV EndIF IF EXISTS C:PatchRAM C:PatchRAM EndIF IF EXISTS C:TagLiFE C:TagLiFE EndIF Assign >NIL: T: RAM:T Assign >NIL: CLIPS: RAM:Clipboards Assign >NIL: REXX: S: Assign >NIL: PRINTERS: DEVS:Printers Assign >NIL: KEYMAPS: DEVS:Keymaps Assign >NIL: LOCALE: SYS:Locale Assign >NIL: LIBS: SYS:Classes ADD Assign >NIL: HELP: LOCALE:Help DEFER IF EXISTS C:BlazeWCP C:BlazeWCP EndIF IF EXISTS SYS:System/FBlit/FBlit SYS:System/FBlit/FBlit SYS:System/FBlit/FText EndIF BindDrivers C:Mount >NIL: DEVS:DOSDrivers/~(#?.info) C:LoadMonDrvs SetEnv Language "english" SetEnv Workbench $Workbench SetEnv Kickstart $Kickstart UnSet Workbench UnSet Kickstart IF EXISTS C:IconBeFast C:IconBeFast 0 EndIF C:AddDataTypes REFRESH QUIET IF EXISTS SYS:System/VPrefs/VisualPrefs Run > NIL: SYS:System/VPrefs/VisualPrefs EndIF C:SwitchControl C:IPrefs SYS:System/FPalette/FPPrefs C:ConClip Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities SYS:System/REXXMast >NIL: IF EXISTS S:User-Startup Execute S:User-Startup EndIF Resident Execute REMOVE Resident Assign REMOVE IF EXISTS C:StackAttack C:StackAttack AUTO EndIF C:LoadWB EndCLI >NIL: Code:
user-startup: ;ClassicWB User-Startup ;---------------------- ;OS39 IF EXISTS C:AntiClick C:AntiClick EndIF Execute S:Assign-Startup Assign >NIL: LAUNCH: SYS:System/BMenu/Files Assign >NIL: VMEM: SYS:T Assign >NIL: AWEB_APL: SYS:Internet/AWeb_APL C:Copy >NIL: S:Ram.info RAM:Disk.info Run >NIL C:RamSnap ;BEGIN MUI IF EXISTS SYS:System/MUI Assign >NIL: MUI: SYS:System/MUI IF EXISTS MUI:Libs Assign >NIL: ADD LIBS: MUI:Libs EndIF IF EXISTS MUI:Locale Assign >NIL: ADD LOCALE: MUI:Locale EndIF C:Version >NIL: exec.library 39 IF NOT WARN IF EXISTS MUI:Docs IF EXISTS HELP:dummy EndIF Assign >NIL: ADD HELP: MUI:Docs EndIF EndIF EndIF ;END MUI C:xfdPatch >NIL: Run >NIL: C:XpkMasterPrefs IF EXISTS C:BorderBlank C:BorderBlank EndIF ;BEGIN Mixer Path sys:prefs ADD GMStart ;END Mixer ;BEGIN MuFastROM SYS:MuTools/MuFastRom On Protect >NIL: ;END MuFastROM ;PsdLoadModule DEVS:input.device QUIET ;Added by Poseidon-Installer Code:
PciInfo report: Pci Device 1: VendorID: $1033 VendorName: NEC Corporation DeviceID: $35 DeviceName: OHCI USB Controller ClassCode: $c0310 RevisionID: $43 InterruptPin: 1 SubsystemVendorID: $1033 SubsystemID: $35 MemSpace0: $40000000 - $40000fff Pci Device 2: VendorID: $1033 VendorName: NEC Corporation DeviceID: $35 DeviceName: OHCI USB Controller ClassCode: $c0310 RevisionID: $43 InterruptPin: 2 SubsystemVendorID: $1033 SubsystemID: $35 MemSpace0: $40100000 - $40100fff Pci Device 3: VendorID: $1033 VendorName: NEC Corporation DeviceID: $e0 DeviceName: uPD72010x USB 2.0 Controller ClassCode: $c0320 RevisionID: $4 InterruptPin: 3 SubsystemVendorID: $ee4 SubsystemID: $89e MemSpace0: $40200000 - $402000ff Pci Device 4: VendorID: $1057 VendorName: Motorola DeviceID: $480b DeviceName: Unknown ClassCode: $60000 RevisionID: $2 InterruptPin: 2 SubsystemVendorID: $0 SubsystemID: $1057 MemSpace0: $40400000 - $40400fff MemSpace1: $40500000 - $40500fff MemSpace2: $48000000 - $4fffffff MemSpace3: $40600000 - $4063ffff Pci Device 5: VendorID: $121a VendorName: 3Dfx Interactive, Inc. DeviceID: $5 DeviceName: Voodoo 3 ClassCode: $30000 RevisionID: $1 InterruptPin: 3 SubsystemVendorID: $121a SubsystemID: $14 MemSpace0: $42000000 - $43ffffff MemSpace1: $44000000 - $45ffffff IOSpace2: $60c06000 - $60c060ff RomSpace: $40300000 - $4030ffff Pci Device 6: VendorID: $1102 VendorName: Creative Labs DeviceID: $2 DeviceName: EMU10k1 [Sound Blaster Live! Series] ClassCode: $40100 RevisionID: $7 InterruptPin: 1 SubsystemVendorID: $1102 SubsystemID: $8064 IOSpace0: $60c06100 - $60c0611f Pci Device 7: VendorID: $1102 VendorName: Creative Labs DeviceID: $7002 DeviceName: SB Live! Game Port ClassCode: $98000 RevisionID: $7 InterruptPin: 0 SubsystemVendorID: $1102 SubsystemID: $20 IOSpace0: $60c06200 - $60c06207 Code:
ShowConfig report: PROCESSOR: CPU 68060/68060fpu/68060mmu CUSTOM CHIPS: AA PAL Alice (id=$0023), AA Lisa (id=$00F8) VERS: Kickstart version 45.57, Exec version 45.20, Disk version 45.5 RAM: Node type $A, Attributes $505 (FAST), at $8000000-$FFFFFFF (128.0 meg) Node type $A, Attributes $505 (FAST), at $7000000-$7FFFFFF (16.0 meg) Node type $A, Attributes $2005 (FAST), at $48480000-$4FEFFFFF (122.5 meg) Node type $A, Attributes $703 (CHIP), at $4000-$1FFFFF (~2.0 meg) Node type $A, Attributes $2005 (FAST), at $44A00000-$44CFFFFF (3.0 meg) BOARDS: Board (Index Information Ltd): Prod=2206/161($89E/$A1) (@$40000000, size 512meg, subsize same) Board (Index Information Ltd): Prod=2206/33($89E/$21) (@$60000000, size 16meg, subsize same) Board + ROM (HD?) (Index Information Ltd): Prod=2206/67($89E/$43) (@$61000000, size 16meg, subsize same) Board + ROM (HD?) (Index Information Ltd): Prod=2206/45($89E/$2D) (@$62000000, size 16meg, subsize 4meg) Board (phase 5): Prod=8512/25($2140/$19) (@$EA0000 128K) Board (VMC): Prod=5001/7($1389/$7) (@$E90000 64K) Avail report: Type Available In-Use Maximum Largest chip 2017496 63272 2080768 2017456 fast 261887904 20703328 282591232 126524688 total 263905400 20766600 284672000 126524688 Code:
MMU config: ;************************************************************************* ;** MMU Configuration file ** ;** ** ;** this file is read on startup by the mmu.library and used to modify ** ;** the pre-calculated or scanned MMU table ** ;** ** ;** © 1999,2000 THOR Software, Thomas Richter ** ;************************************************************************* ; the current version of the MMU library knows four commands that can ; be used in this file: ; CLEARTTX clears all or parts of the transparent translation registers ; ADDMEM adds memory to the exec free list pool. BE WARNED, this command ; does NOT modify the MMU tables, this must be done manually with ; SETCACHEMODE ; SETCACHEMODE defines the MMU tables. ; DESCRIPTORCACHEINHIBIT defines whether the data cache should be disabled ; for the MMU descriptors. It's usually OFF meaning the cache will remain ; enabled. This is fine for the mmu.library, but certain hacks might require ; an ON argument here. Note that this means more work for the library. ClearTTx ;ignore all TTX registers if any. We don't need them ;DescriptorCacheInhibit ON ;make access to MMU descriptors cache inhibited ;Board specific setup follows here, ;generated by ScanToConfig 1.04 © 14.04.2000 THOR-Software ;General memory setup follows. ;The following lines are a compatibility kludge for some P5 boards ;which enable the MMU prior to the 68040/68060 library and leave ;the memory in CACHEINHIBIT state. You may remove the following ;lines on all other machines most likely. SetCacheMode from 0x07000000 size 0x09000000 Copyback SetCacheMode from 0x48480000 size 0x07A80000 CacheInhibit SetCacheMode from 0x00000000 size 0x00200000 CacheInhibit NonSerial Imprecise SetCacheMode from 0x44A00000 size 0x00300000 CacheInhibit ;Memory setup end. ;In case you don't run the V40 68040 resp. 68060.library ;the following line will speed up the chip memory. It is ;not required otherwise. SetCacheMode 0x000 Size 0x200000 CacheInhibit Imprecise NonSerial SetCacheMode 0xE90000 Size 0x30000 CacheInhibit Valid IOSpace ;The following memory region should be left blank ;according to the CBM design rules. It isn't... SetCacheMode 0xF00000 Size 0x80000 CacheInhibit Valid IOSpace SetCacheMode 0x1000000 Size 0x6000000 WriteThrough Valid SetCacheMode 0x40000000 Size 0x22400000 CacheInhibit Valid IOSpace ;If you don't own a PPC, you may remove the next line: SetCacheMode 0x40000000 Size 0x22400000 CacheInhibit IOSpace Valid Last edited by Timtheloon; 27 April 2020 at 20:19. |
27 April 2020, 20:33 | #3891 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,932
|
Tim, a couple things I noticed:
VoodooInt = Yes this used to be slow and crashy if it was not set. VoodooMem = 10 that's a little low but should be fine. Generally we set it for 12 or 13 as you'd want to give as much VRAM to the Voodoo as possible, in that if you don't need it for Spider buffers or Sonnetlib space, it's not good for much else. Not sure about that card order, but if it works, then I suppose it's fine. SBLive is not supported by anything other than as a mixer, AFAIK there is no functional driver as an AHI device, but maybe you just want it as a sound mixer or maybe it's just there for bus termination. There is in-theory a driver in AHI v6.7 for OpenPCI but I don't know anyone that has gotten it working, maybe Trixster in his AA3000+ on Prometheus? That benchmark result is not far off for a Voodoo at 800x600. There is a known issue that FPS drops off a cliff higher than 640x480, which should give you something like 50FPS. @Fitzsteve, listen to Buli, he knows what he's talking about for video players, AMP2 by Amidog or Frogger are your best choices. I almost got FFMPEG built and working at one point but needs a lot of work. Moovid is not really useful from my testing, it's mostly a 68k app with a little sprinkle of PPC support. Last edited by grelbfarlk; 27 April 2020 at 20:43. |
27 April 2020, 20:44 | #3892 | |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
Sonnet 7200 PCI programming
Quote:
The reason I set VoodooInt to No, is because if I Set it to yes my WHDload games do not start I just get a black screen I'm not sure if this is a bug with the Ratte Auto Switch SwitchControl (This Also happens on my 1200 Sonnet Build) I will Adjust the VoodooMem and see how it performs Now I'm a little confused by the SBLive, I thought, if it wasn't compatibly I wouldn't get sound in my Games when I select AHI? but I think I have a spare SB128 somewhere I'll try Blitzquake at 640x480 see if I can get close to 50Fps Last edited by Timtheloon; 27 April 2020 at 21:23. |
|
27 April 2020, 21:24 | #3893 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
I had black screens with WHDLoad too. It was caused by the combination of using FFS filesystem, SCSIDirect enabled and running slaves with PRELOAD. Disbling SCSIDirect fixed it for me. In the end I switched to PFS3AIO again, because Quake2 took almost days to load with FFS.
|
27 April 2020, 21:27 | #3894 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,932
|
Quote:
The VoodooMem is only really going to be an issue if you run out of VRAM, which isn't really that likely. In theory some applications might save more textures in VRAM but I don't know if any of the games are really that advanced to take advantage of it. It's not a big deal. Unless you see SBLive(EMU10k) in the AHI prefs and it's set to an SBLive(EMU10k) under Music or AHI Unit 0, it's not actually using the SBLive. If you have Paula 8-bit DMA there, it's only using Paula. But if you're just using it as a mixer then it's not touching AHI at all. |
|
27 April 2020, 21:28 | #3895 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,016
|
I would turn off VoodooMemOS. That 3 MB you can better use for textures. Also, it seems you have the powerpc.library from Aminet? Latest should say 17.13 (from git).
Looking at my MMU config everything is commented out. The mmu library then defaults to making all Zorro 3 used cacheinhibit I/O space. @BULI WarpDT is again something i want to look at in the future. Will take a while. The problem is that pictures and stuff are probably loaded to fast mem instead of ppc memory. You can maybe add the suffix _PPC to the executable name, see if that helps. |
27 April 2020, 21:35 | #3896 | ||
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
Quote:
Quote:
Would you be able to show us a screen shot of your MMU-Configuration file? |
||
27 April 2020, 21:48 | #3897 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,016
|
Quote:
With commented out I mean commented out. There is not a single active line in my config. Except the ClearTTx and ClearMMU line. Rest have ; in front of them. |
|
27 April 2020, 21:55 | #3898 | |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
Quote:
Code:
SetCacheMode from 0x07000000 size 0x09000000 Copyback SetCacheMode from 0x48480000 size 0x07A80000 CacheInhibit SetCacheMode from 0x00000000 size 0x00200000 CacheInhibit NonSerial Imprecise SetCacheMode from 0x44A00000 size 0x00300000 CacheInhibit SetCacheMode 0x000 Size 0x200000 CacheInhibit Imprecise NonSerial SetCacheMode 0xE90000 Size 0x30000 CacheInhibit Valid IOSpace SetCacheMode 0xF00000 Size 0x80000 CacheInhibit Valid IOSpace SetCacheMode 0x1000000 Size 0x6000000 WriteThrough Valid SetCacheMode 0x40000000 Size 0x22400000 CacheInhibit Valid IOSpace SetCacheMode 0x40000000 Size 0x22400000 CacheInhibit IOSpace Valid Last edited by Timtheloon; 28 April 2020 at 14:24. |
|
27 April 2020, 23:03 | #3899 | |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 303
|
Quote:
https://github.com/Sakura-IT/SonnetAmiga/releases |
|
27 April 2020, 23:14 | #3900 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
So guess what. it may be heat causing my issues after all, details here: http://eab.abime.net/showpost.php?p=...&postcount=288
Voodoo or Mediator logic board? Given Quake060 runs fine with Warp3D and QuakeWoS crashes, would it point more to the logic board or still the voodoo? Here you'll find the latest releases for the library: https://jenkins.sakura-it.pl/job/sonnetamiga/ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|