English Amiga Board

English Amiga Board (https://eab.abime.net/index.php)
-   support.WinUAE (https://eab.abime.net/forumdisplay.php?f=5)
-   -   Hard Maximum File Size (https://eab.abime.net/showthread.php?t=83750)

AMIGASYSTEM 13 August 2016 09:27

HardFile Maximum File Size
 
What is the maximum Hard File Size to install OS4 on WinUAE?
There is a difference Use between a UAE Device (uaehf.device) And Accelerator Cyberstorm PPC (cybppc).
I ask this because I created a bigger hardfile (6 Giga) to install OS4.1, and I'm getting the Guru when I start the new Hardfile created, But I do not know if this depends on the size hardfile or other factor.

Toni Wilen 13 August 2016 09:52

If it crashes before OS4 boot color changes, it probably is pure m68k OS3.x 4G limit issue.

RDB installed filesystem MUST be >4G capable if boot partition is not fully inside first 4G.

I don't know which access modes CSPPC SCSI driver supports. I assume it supports TD64 but not necessarily NSD. DirectSCSI is guaranteed to be fully supported.

You need to find matching RDB installed filesystem.

(In other words, not my problem :))

AMIGASYSTEM 13 August 2016 10:13

Then I explain the quick procedure that I wanted to try:

OS4.1 started my system on Hard File (uae.device), added a second Hard File 6 Giga virgin, with HDToolBox I initialized the hard 6 Giga files, and I created:

- First partition (SFS) from 2 Giga for the system
- Second Partition (SFS) 3,5 Giga per from 2 Giga for the Dati
- Third Partition (SFS) 500 Mega for the SWAP

Restart System, i quickly formatted partitions, and with DOpus 4 I copied the contents of the old system to the new Hardfile (first partition). I try to start the new system and immediately exits Guru (first color)


I also tried installing with the OS4.1 CD, but everything hangs just start the installation!
Now let me try to install from a CD with a whole based configuration Accelerator Cyberstorm PPC (cybppc).

thomas 13 August 2016 11:24

You forgot to put 68k SFS into the RDB of the new hardfile.

AMIGASYSTEM 13 August 2016 12:08

Hello thomas thanks for your intervention, you're referring to the creation of hardfile WinUAE (see screenshot), If so I have not forgotten HDToolBox otherwise would not have seen unless other procedure.

thomas 13 August 2016 14:41

No, I mean in HDToolbox. If you use a foreign file system, you have to use the add/update page to add it to the harddisk.

http://thomas-rapp.homepage.t-online...6addupdate.png

AMIGASYSTEM 13 August 2016 15:41

Ok Thomas, i had already solved, my 62 years are felt all, I forgot to update the DosTypes SFS http://www.amigapage.it/images/emoticons/sedia.gif


All times are GMT +2. The time now is 05:56.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Page generated in 0.05508 seconds with 11 queries