Winuae v22r2 problem???

grassden · 15 November 2002, 16:35

Hi all, just d/led v22r2 but when i execute the program , Im getting two error messages as follows :-<

The Winuae.exe file is linked to missing export setupapi.dll:SetupDiEnumDeviceInterfaces.

c:\winuae\winuae.exe

A device attached to the system in not functioning

As to my specs <chuckles, pretty low tech!> Pentium Pro II 233Mhz pc with 128mb ram, 4.3gb hd, Intel i740 (8mb) with OS being win 95 v2.5b(USB support)

As to previous versions of winuae had working e.g. v22r1, v21r4+3 , v17r3, v8r8

So what happening here then? get back to me if any1 got a good idea why this latest version giving me the funny looks!!!

Your unmiserably servant

15 November 2002, 17:25

Do You have DX8 installed?

grassden · 15 November 2002, 17:29

Yes , I do have direct 8 install <but I supposed i could reinstall the bloody useless software again!!>

RetroMan · 15 November 2002, 17:51

This *might* be an OS Problem

You allready donwloaded the necessary files for Win95 ??

Quote:

From the Download section of Winuae.net :

Windows 95 users need to download: Winsock2 update and OpenGL support files

grassden · 15 November 2002, 17:55

Chuckles....Iv you nae read my orginal post.....iv used previous versions so iv already got the stuff as already specified by winuae

RetroMan · 15 November 2002, 18:12

*doh*

Haven´t read your post properly

Sorry, I should go now

CPC464 · 15 November 2002, 18:55

I can tell you that SETUPAPI.DLL is a Windows system file, but I do not know its function.

Try this link

http://www.computing.net/windowsme/w...rum/30402.html

OR a quote from Microsofts message Board says

Quote:

rename the following files to a .old file extension, extract new copies of these files to the Windows\System folder, and then restart your computer:

FILE TO RENAME - Setupapi.dll

Hope this Helps

LordIvo · 15 November 2002, 19:43

Here is another problem...

After I transferred latest WinUAE 0.8.22 R2 on my laptop the initial HW check sequence did kill my USB optical mouse driver so mouse completely freezed that I had to reboot Win2000.

However the emulator started OK -- only the mouse was stuffed. There must be something wrong because on this very same system I'm running R1 which doesn't do anything like this...

Any ideas Toni ?

Toni Wilen · 15 November 2002, 21:46

Quote:

After I transferred latest WinUAE 0.8.22 R2 on my laptop the initial HW check sequence did kill my USB optical mouse driver so mouse completely freezed that I had to reboot Win2000.

Please be more specific.. "HW check sequence"?

Quote:

There must be something wrong because on this very same system I'm running R1 which doesn't do anything like this...

R2 has completely different mouse/joystick/keyboard code (DirectInput)

LordIvo · 15 November 2002, 22:26

By "HW check" I only meant the first WinUAE run ~ screen modes detection and etc... Haven't tried to run it again 'cause I'm hanging on the net and franky don't wanna have another reboot -- will try sometime tomorrow!

grassden · 16 November 2002, 14:15

Hi all, Im back again ....... latest is that i reloaded ws2setup and the rest required for win95 still the same old chestnut as regards to the errors Iv reported in my original post. But with another twist <gee Im getting wordly prose!> I renamed setupapi.dll and I ran winuae v22r1 and v17r3 without a hitch but I still get the same errors messages for v22r2!!!! So either Toni got a wee code going somewhere up the ether or Im getting wee bit chewed off!!!

Yours still ever struggling servant

18 November 2002, 22:26

download the damn zip and quit complaining :P

Toni Wilen · 19 November 2002, 22:02

Quote:

The Winuae.exe file is linked to missing export setupapi.dll:SetupDiEnumDeviceInterfaces.

Next WinUAE release is Windows 95 compatible again..

Antiriad · 19 November 2002, 22:28

Hehe, I love the latest release of WinUAE!!!
The OpenGL stoof is brilliant as is making the Windoze key the Amiga key! Twas hilarious rebooting a virtual Amiga using them and the ctrl key!

Is 060 cpu emulation ever gonna happen? Not essential i know...
That and a GUI mapping PC Joypad buttons or keys to the CD32 extra buttons?

15 November 2002, 16:35	#1
grassden Zone Friend Join Date: Jun 2002 Location: Hawick/Scotland Age: 55 Posts: 21	Winuae v22r2 problem??? Hi all, just d/led v22r2 but when i execute the program , Im getting two error messages as follows :-< The Winuae.exe file is linked to missing export setupapi.dll:SetupDiEnumDeviceInterfaces. c:\winuae\winuae.exe A device attached to the system in not functioning As to my specs <chuckles, pretty low tech!> Pentium Pro II 233Mhz pc with 128mb ram, 4.3gb hd, Intel i740 (8mb) with OS being win 95 v2.5b(USB support) As to previous versions of winuae had working e.g. v22r1, v21r4+3 , v17r3, v8r8 So what happening here then? get back to me if any1 got a good idea why this latest version giving me the funny looks!!! Your unmiserably servant

16 November 2002, 14:15	#11
grassden Zone Friend Join Date: Jun 2002 Location: Hawick/Scotland Age: 55 Posts: 21	Strange and stranger Hi all, Im back again ....... latest is that i reloaded ws2setup and the rest required for win95 still the same old chestnut as regards to the errors Iv reported in my original post. But with another twist <gee Im getting wordly prose!> I renamed setupapi.dll and I ran winuae v22r1 and v17r3 without a hitch but I still get the same errors messages for v22r2!!!! So either Toni got a wee code going somewhere up the ether or Im getting wee bit chewed off!!! Yours still ever struggling servant

18 November 2002, 22:26	#12
Loof Posts: n/a	dude download the damn zip and quit complaining :P

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike the Magic Dragon: in-game problem or WinUAE problem?	petran	support.WinUAE	33	16 August 2023 20:29
Problem to use the keyboard in WinUAE	frikilokooo	support.WinUAE	0	15 July 2007 17:55
WinUAe 1.0 Problem	Damage	support.WinUAE	6	09 August 2005 12:07
Problem with AAAARGH in Winuae	Mangar	support.Games	1	20 March 2004 05:37
WinUAE cd drive problem!	ElectroBlaster	support.WinUAE	7	19 May 2003 15:05

15 November 2002, 17:25	#2
Guest Posts: n/a	Do You have DX8 installed?

15 November 2002, 17:29	#3
grassden Zone Friend Join Date: Jun 2002 Location: Hawick/Scotland Age: 55 Posts: 21	Yes , I do have direct 8 install <but I supposed i could reinstall the bloody useless software again!!>

15 November 2002, 17:55	#5
grassden Zone Friend Join Date: Jun 2002 Location: Hawick/Scotland Age: 55 Posts: 21	Chuckles....Iv you nae read my orginal post.....iv used previous versions so iv already got the stuff as already specified by winuae

15 November 2002, 18:12	#6
RetroMan Registered User Join Date: Aug 2001 Location: Germany Age: 51 Posts: 3,704	doh Haven´t read your post properly Sorry, I should go now

15 November 2002, 19:43	#8
LordIvo Junior Member Join Date: Jul 2001 Location: London Age: 49 Posts: 50	Here is another problem... After I transferred latest WinUAE 0.8.22 R2 on my laptop the initial HW check sequence did kill my USB optical mouse driver so mouse completely freezed that I had to reboot Win2000. However the emulator started OK -- only the mouse was stuffed. There must be something wrong because on this very same system I'm running R1 which doesn't do anything like this... Any ideas Toni ?

15 November 2002, 22:26	#10
LordIvo Junior Member Join Date: Jul 2001 Location: London Age: 49 Posts: 50	By "HW check" I only meant the first WinUAE run ~ screen modes detection and etc... Haven't tried to run it again 'cause I'm hanging on the net and franky don't wanna have another reboot -- will try sometime tomorrow!

19 November 2002, 22:28	#14
Antiriad The Sacred Armour Of Join Date: Aug 2002 Location: Sussex, UK Age: 44 Posts: 1,141	Hehe, I love the latest release of WinUAE!!! The OpenGL stoof is brilliant as is making the Windoze key the Amiga key! Twas hilarious rebooting a virtual Amiga using them and the ctrl key! Is 060 cpu emulation ever gonna happen? Not essential i know... That and a GUI mapping PC Joypad buttons or keys to the CD32 extra buttons?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)