![]() |
![]() |
#1 |
Registered User
Join Date: May 2018
Location: Illinois, USA
Posts: 32
|
![]()
I just got my first A600 and being a previously only an owner of an A500 I have some questions.
I'm going to be picking up a A604N trap door expansion, as well as the IDE CF that they sell on Amigakit. Do I also want to upgrade the kickstart from 2.05 to 3.1? I've heard that it may run slower in Workbench 3.1. Will that limit any abilities that the machine may offer? If I stay on kick 2.05 what version of Workbench do I install on the CF? All the Amiga shops seem to only be selling Workbench 2.1. I also have a question about WHDload. I've read that it requires a 68010 processor but I've also read some real old posts here saying it "can" be used on a stock 68000 on a 600, albeit with issues. Thanks in advance, any other tips on the A600 are appreciated as well! ![]() Last edited by boratintheuk; 04 July 2018 at 07:07. Reason: Didn't feel I should make a new thread. |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2010
Location: Helsinki, Finland
Posts: 1,341
|
Kickstart/Workbench 3.1 is a fine update and it will probably be more compatible overall than 2.05 (many Workbench utilities expect 3.0 or above). I wouldn't say there is much of a performance penalty until 3.5 or 3.9. For pure games compatibility 1.3 would actually be best, but if you can run them via WHDLoad, that's not really an issue.
WHDLoad doesn't require a 68010, but having one makes it possible to exit games more reliably. So with some games you may need to do a soft reboot to quit. You could however use some Fast RAM to make good use of WHDLoad, but the 2MB of Chip RAM will already allow a reasonable number of titles to run (just keep the RAM usage in your Workbench install low). And as always with this generation of Amigas, keep an eye on the condition of the motherboard, the capacitors often leak and slowly corrode the PCB until something eventually fails. |
![]() |
![]() |
#3 |
Unregistered User
Join Date: Sep 2012
Location: Copenhagen / DK
Age: 44
Posts: 4,190
|
The upgrade from KS 2.05 -> 3.1 is a good one in my opinion. No downsides really - only benefits. It is more compatible with newer SW and it also has noticeable performance improvements so it feels 'snappier'. WB 2.1/3.1 is not much different, performance-wise so going to KS3.1+WB3.1 is the way to go. WB3.5+ is made for 020+, so you don't want to go there, unless you plan on putting an 020 or 030 in there.
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2018
Location: Illinois, USA
Posts: 32
|
Thanks for the information! I'll pop 3.1 in this bad boy. As for the machine itself it's already been recapped, but thanks for the concern.
|
![]() |
![]() |
#5 |
Registered User
Join Date: May 2018
Location: Illinois, USA
Posts: 32
|
Can someone share some information with me about compaitable PCMCIA ethernet cards I could use on my A600? It seems like a TON of wired ethernet PCMCIA have Amiga support but I can't find a solid list of what's actually supported.
Are there certain models to look for? Everything on ebay looks dirt cheap, so I don't see any reason why I shouldn't pick one of these up. |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,416
|
There is a compatibility list in the documentation of the cnet.device driver package that might be of use, so I would suggest downloading that and having a look.
|
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2004
Location: Tacoma, WA USA
Age: 52
Posts: 1,937
|
I find 3.1 runs better than 2.0 on a stock A600. Some fast RAM is a must on this unit though. You can get internal RAM cards that pop on the 68000.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
compatibility of IDE patched kick 1.3 for Amiga 600 ? | Overdoc | support.Hardware | 10 | 21 September 2015 16:55 |
A500 kick 1.3 in A600..? | 8bitbubsy | support.Hardware | 14 | 02 November 2009 23:10 |
A600 kick 2.05 - What's the newest WB version for it? | 8bitbubsy | support.Hardware | 11 | 17 October 2009 12:25 |
Kick start for A600 | MSL | support.Hardware | 7 | 20 March 2009 07:19 |
Some A-590 questions... (kick 2.0 ???, pass-thru-port ??, attach CF-card ?? ) | Overdoc | support.Hardware | 5 | 30 May 2006 07:30 |
|
|