ASM: Resources

BippyM · 09 January 2006, 23:46

Please post any links to Assembler (68k) resources in this thread with a breif explanation of what is there and i'll whack em in this first post

Here are some:

A great general site with plenty of examples and explanations, covers AGA and some info on the action replay carts :

How To Code asm: V7

Here are some more general sites, some are better than others

http://ada.planet-d.net/forum/index....vtopic&forum=4
http://www.stanford.edu/class/cs110/handouts/
http://www.scm.tees.ac.uk/users/a.clements/pofc2.htm

THis next link is a pdf of the 68k instruction set.. If this site goes offline and I'll whack it in the zone

68k Instruction Set (PDF)

Here are other sites with the 68k instruction set

http://www.arspentia.org/evilinc/instruction_set_68k
http://fms.komkon.org/comp/CPUs/68000.txt

Some information on addressing modes

http://goforit.unk.edu/asm/mc68000.htm
http://www.stanford.edu/class/cs110/...sing_Modes.pdf
http://ironbark.bendigo.latrobe.edu....ddressing.html

Generic Amiga asm tutorials and examples

http://www.algonet.se/~davsjo/amigaasm.html

Found the following course online. It's wright state university!

http://psi.cse.tamu.edu/teaching/lecture_notes/

Scroll to the bottom!
A useful website with a 68k emulator/assembler for PC.. Some might find it useful when starting out http://www.easy68k.com/index.html

BippyM · 09 January 2006, 23:46

*reserved for more links if the need arises*

Alter · 13 January 2006, 22:55

I just upped some tutorials on democoding on a500 in the Zone . Its unfortunatley only in swedish. It explaines everyting from startup through sprites,blitter,bobs,vector, 2d-clipping......etc ( 13 Lessons together with sourcecode )
Its a very good tutorial and all the source-files is working ( At least with asmone ). Maybe someone can translate it into english ?? I would do it if I had the time but sorry.. to much to do :-( Enjoy !!!!!

redblade · 14 January 2006, 00:01

The tutorials below are in English.

Cool-g Asm Source (Belgium 93)

Contains:
AsmOne 1.6
10 basic Sources.
The AsmOne Examples, that Install a BootBlock which displays Text.
A Horizontal Text Scroller.
Fonts
Music

Also has 3 introduction files to Assembler on the Amiga.
1: Introduction about 68k instruction set and what the commands do.
2: Introduction about the Amiga Custom Chips and how to use them.
3: Introdcution to the Amiga Libraries and some basic source.

*Warning* this code will need to be fixed to run nicely on KS2+/AGA.

It also comes with the well documented Source to a Demo which:
Displays a picture
Plays a Music Tracker Mod
Scrolls Text
Scrolls a Starfield.

Changing the Picture, Music Tracker, Music, Text is easy. Newbies may have problems changing the Scroll Font, Or changing the Scroller position.

The demo above uses a mouse routine and not a vector routine as below
http://wuarchive.wustl.edu/pub/amine...Asm_course.lha

--
Another Cool-g Source set.

*Source will need to be fixed for Kick2+/AGA*

Code Demoes using by installing the main loop in a Vector.

Contains:
Fonts
Seka Assembler
A PowerShell
Basic Source to generate Sinus List
Some other tools.

The source in here is mainly about Plasma, If I can recall correctly (correct me if I am wrong).
http://wuarchive.wustl.edu/pub/amine...CourseSrc1.lha

Fissuras · 14 January 2006, 10:03

Hey, I don't believe Amiga University wasn't listed!
http://www.amigau.com/c-programming/...semblertut.htm
http://www.amigau.com/c-programming/...mblerlinks.htm

Galaxy · 14 January 2006, 22:08

There is a whole series of tutorials on "programming the Amiga in assembly language" in the US journal "AC's Tech for the Commodore Amiga".

I can scan this series of articles if there is interest, but some of them seem quite technical.

BippyM · 14 January 2006, 22:37

Scan em all please Galaxy

The more info we have the better. .I'm thinking about getting all this hosted online in one convenient place

I will be scouring the docs disks in tosec shortly for asm and amiga reference materials

kriz · 14 January 2006, 22:38

very nice bippym!

Galaxy · 15 January 2006, 06:02

Two articles from AC's Tech 2(1) are available in the Zone along with the cover disk that contains source code supporting the articles.

We have:
- Programming the Amiga in assembly language : part 1 : getting started.
- Low-level disk access made easy!

nzo · 16 January 2006, 13:23

IMHO one of the best ASM (demo)coding tutorials from alpha to omega are available by Randy/Ram Jam:
http://de4.aminet.net/dev/asm/CorsoASM-ITA01.lha
http://de4.aminet.net/dev/asm/CorsoASM-ITA02.lha
http://de4.aminet.net/dev/asm/CorsoASM-ITA03.lha
http://de4.aminet.net/dev/asm/CorsoASM-ITA04.lha
http://de4.aminet.net/dev/asm/CorsoASM-ITA05.lha
http://de4.aminet.net/dev/asm/CorsoASM-ITA06.lha

These are all in italian but I've found the first lessons in german too:
http://main.aminet.net/dev/asm/asm-kurs.lha

offtopic: Amiga-like java effects: http://www.anfyteam.com/ (also by Fabio Ciucci aka Randy/Ram Jam)

BippyM · 16 January 2006, 15:36

I've scoured all the LSD docs disks and removed anything that is remotely interesting (Any programming language, and hardware/system stuff)

Will up it to the zone later

Alter · 16 January 2006, 17:19

For those who need a Startup code for A500 I've coded a startup routine which I used many times myself. I coded it in Asmone and Its very simple. I commented it for those who are not so experienced yet. Its working on Kick 1.2 and 1.3 and maybe 2.0 ( but that i am unsure of ). The routine itself is what I want to call dirty coding bec its not coded in a system friendly way. Its ment for demo-coding and all thats matter here is speed so i use DMA directly and I never use any librarys. Hope it will be useful and I would like some feedback if someone found it useful... :-) P.S I already upped it in The Zone

NOB · 16 January 2006, 18:03

move.l #$40000,a0

that is real oldskool coding.
Using absolute adresses.And that was real fun!COOL

BippyM · 12 April 2007, 03:40

http://www.monroeccc.edu/ckelly/File...8KQuickRef.pdf

Galaxy · 26 June 2007, 13:19

Amiga Shopper beginners tutorial (pp24-31)

Galaxy · 22 September 2008, 12:43

The programming articles from Amiga Computing 91 have been added to AMR. There is an ARexx article, an AMOS article and and ASM article.

http://amr.abime.net/issue_554

AlfaRomeo · 17 May 2010, 18:21

I´m searching for Assembler tutorials but seems that almost all of them are for older machines

Where I can find assembler tutorials for 68020+ and that includes AGA code?
Thanks in advance

AlfaRomeo · 17 May 2010, 18:27

Quote:

Originally Posted by bippym

I've scoured all the LSD docs disks and removed anything that is remotely interesting (Any programming language, and hardware/system stuff)

Will up it to the zone later

It´s possible to upload this to the zone again, please?

BippyM · 17 May 2010, 22:51

I will when I get my PC repaired, I have nothing on the laptop

AlfaRomeo · 18 May 2010, 02:53

Thanks bippym
I will keep waiting right here

09 January 2006, 23:46	#1
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	ASM: Resources Please post any links to Assembler (68k) resources in this thread with a breif explanation of what is there and i'll whack em in this first post Here are some: A great general site with plenty of examples and explanations, covers AGA and some info on the action replay carts : How To Code asm: V7 Here are some more general sites, some are better than others http://ada.planet-d.net/forum/index....vtopic&forum=4 http://www.stanford.edu/class/cs110/handouts/ http://www.scm.tees.ac.uk/users/a.clements/pofc2.htm THis next link is a pdf of the 68k instruction set.. If this site goes offline and I'll whack it in the zone 68k Instruction Set (PDF) Here are other sites with the 68k instruction set http://www.arspentia.org/evilinc/instruction_set_68k http://fms.komkon.org/comp/CPUs/68000.txt Some information on addressing modes http://goforit.unk.edu/asm/mc68000.htm http://www.stanford.edu/class/cs110/...sing_Modes.pdf http://ironbark.bendigo.latrobe.edu....ddressing.html Generic Amiga asm tutorials and examples http://www.algonet.se/~davsjo/amigaasm.html Found the following course online. It's wright state university! http://psi.cse.tamu.edu/teaching/lecture_notes/ Scroll to the bottom! A useful website with a 68k emulator/assembler for PC.. Some might find it useful when starting out http://www.easy68k.com/index.html Last edited by BippyM; 07 August 2022 at 12:53.

14 January 2006, 10:03	#5
Fissuras Old Luny Join Date: Sep 2001 Location: Brazil Age: 53 Posts: 574	Amiga University - Downloadable Assembler Tutorials and Code Samples Hey, I don't believe Amiga University wasn't listed! http://www.amigau.com/c-programming/...semblertut.htm http://www.amigau.com/c-programming/...mblerlinks.htm Last edited by Fissuras; 14 January 2006 at 10:16.

16 January 2006, 17:19	#12
Alter Oldskool Join Date: Dec 2005 Location: Norway Age: 51 Posts: 28	For those who need a Startup code for A500 I've coded a startup routine which I used many times myself. I coded it in Asmone and Its very simple. I commented it for those who are not so experienced yet. Its working on Kick 1.2 and 1.3 and maybe 2.0 ( but that i am unsure of ). The routine itself is what I want to call dirty coding bec its not coded in a system friendly way. Its ment for demo-coding and all thats matter here is speed so i use DMA directly and I never use any librarys. Hope it will be useful and I would like some feedback if someone found it useful... :-) P.S I already upped it in The Zone Last edited by Alter; 16 January 2006 at 17:51.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AmigaDOS scripting resources	Photon	Coders. System	26	19 March 2018 14:51
Blitz 2: Resources	r0ber7	Coders. Tutorials	14	24 January 2013 23:58
Indexed image (CLUT) programming resources	Unch	Coders. General	2	27 January 2008 16:17
Resources??	DDNI	project.WHDLoad	5	25 April 2007 20:42
More WHDLoad Resources on Emule/Edonkey	DeCreator	Amiga scene	11	23 February 2004 12:31

13 January 2006, 22:55	#3
Alter Oldskool Join Date: Dec 2005 Location: Norway Age: 51 Posts: 28	I just upped some tutorials on democoding on a500 in the Zone . Its unfortunatley only in swedish. It explaines everyting from startup through sprites,blitter,bobs,vector, 2d-clipping......etc ( 13 Lessons together with sourcecode ) Its a very good tutorial and all the source-files is working ( At least with asmone ). Maybe someone can translate it into english ?? I would do it if I had the time but sorry.. to much to do :-( Enjoy !!!!!

14 January 2006, 00:01	#4
redblade Zone Friend Join Date: Mar 2004 Location: Middle Earth Age: 40 Posts: 2,127	The tutorials below are in English. Cool-g Asm Source (Belgium 93) Contains: AsmOne 1.6 10 basic Sources. The AsmOne Examples, that Install a BootBlock which displays Text. A Horizontal Text Scroller. Fonts Music Also has 3 introduction files to Assembler on the Amiga. 1: Introduction about 68k instruction set and what the commands do. 2: Introduction about the Amiga Custom Chips and how to use them. 3: Introdcution to the Amiga Libraries and some basic source. Warning this code will need to be fixed to run nicely on KS2+/AGA. It also comes with the well documented Source to a Demo which: Displays a picture Plays a Music Tracker Mod Scrolls Text Scrolls a Starfield. Changing the Picture, Music Tracker, Music, Text is easy. Newbies may have problems changing the Scroll Font, Or changing the Scroller position. The demo above uses a mouse routine and not a vector routine as below http://wuarchive.wustl.edu/pub/amine...Asm_course.lha -- Another Cool-g Source set. Source will need to be fixed for Kick2+/AGA Code Demoes using by installing the main loop in a Vector. Contains: Fonts Seka Assembler A PowerShell Basic Source to generate Sinus List Some other tools. The source in here is mainly about Plasma, If I can recall correctly (correct me if I am wrong). http://wuarchive.wustl.edu/pub/amine...CourseSrc1.lha

14 January 2006, 22:08	#6
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	There is a whole series of tutorials on "programming the Amiga in assembly language" in the US journal "AC's Tech for the Commodore Amiga". I can scan this series of articles if there is interest, but some of them seem quite technical.

14 January 2006, 22:37	#7
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	Scan em all please Galaxy The more info we have the better. .I'm thinking about getting all this hosted online in one convenient place I will be scouring the docs disks in tosec shortly for asm and amiga reference materials

14 January 2006, 22:38	#8
kriz Junior Member Join Date: Sep 2001 Location: No(R)Way Age: 41 Posts: 3,185	very nice bippym!

15 January 2006, 06:02	#9
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	Two articles from AC's Tech 2(1) are available in the Zone along with the cover disk that contains source code supporting the articles. We have: - Programming the Amiga in assembly language : part 1 : getting started. - Low-level disk access made easy!

16 January 2006, 13:23	#10
nzo WHD/oldskool maniac Join Date: Dec 2003 Location: Pecs/Hungary Age: 49 Posts: 99	IMHO one of the best ASM (demo)coding tutorials from alpha to omega are available by Randy/Ram Jam: http://de4.aminet.net/dev/asm/CorsoASM-ITA01.lha http://de4.aminet.net/dev/asm/CorsoASM-ITA02.lha http://de4.aminet.net/dev/asm/CorsoASM-ITA03.lha http://de4.aminet.net/dev/asm/CorsoASM-ITA04.lha http://de4.aminet.net/dev/asm/CorsoASM-ITA05.lha http://de4.aminet.net/dev/asm/CorsoASM-ITA06.lha These are all in italian but I've found the first lessons in german too: http://main.aminet.net/dev/asm/asm-kurs.lha offtopic: Amiga-like java effects: http://www.anfyteam.com/ (also by Fabio Ciucci aka Randy/Ram Jam)

16 January 2006, 15:36	#11
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	I've scoured all the LSD docs disks and removed anything that is remotely interesting (Any programming language, and hardware/system stuff) Will up it to the zone later

16 January 2006, 18:03	#13
NOB Zone Friend Join Date: Aug 2005 Location: Germany Age: 52 Posts: 424	move.l #$40000,a0 that is real oldskool coding. Using absolute adresses.And that was real fun!COOL

12 April 2007, 03:40	#14
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	http://www.monroeccc.edu/ckelly/File...8KQuickRef.pdf

26 June 2007, 13:19	#15
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	Amiga Shopper beginners tutorial (pp24-31)

22 September 2008, 12:43	#16
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	The programming articles from Amiga Computing 91 have been added to AMR. There is an ARexx article, an AMOS article and and ASM article. http://amr.abime.net/issue_554

17 May 2010, 18:21	#17
AlfaRomeo A1200 040 SAM440EP 667 Join Date: Jan 2008 Location: Lisbon / Portugal Posts: 873	I´m searching for Assembler tutorials but seems that almost all of them are for older machines Where I can find assembler tutorials for 68020+ and that includes AGA code? Thanks in advance

17 May 2010, 22:51	#19
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	I will when I get my PC repaired, I have nothing on the laptop

18 May 2010, 02:53	#20
AlfaRomeo A1200 040 SAM440EP 667 Join Date: Jan 2008 Location: Lisbon / Portugal Posts: 873	Thanks bippym I will keep waiting right here

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)