2091 ROM Image (Version 7)

16 February 2007, 20:07

I purchased two four GB SCSI hard drives on Ebay without realizing that I needed version 7 ROMs on the 2091 in order to see the drive properly (I currently have version 6.6 installed on the 2091 card). My friend lent me his EPROM burner and I figured that I could just erase my 6.6 ROMs and then burn the 7.0 ROMs. The only problem is, I've been searching the Internet for a couple of days and I can't find the 2091 version 7.0 ROM images anywhere. Does anyone have a copy that they can email me? (Or is there an area on this message board to post temp files like this?)

Thanks!

Adam

TjLaZer · 17 February 2007, 19:42

in the zone

19 February 2007, 05:12

Thanks!

Adam

alexh · 19 February 2007, 09:58

Out of curiosity would these ROMS be compatible with an A590?

TjLaZer · 20 February 2007, 06:18

Yes!

Jope · 23 February 2007, 09:36

Someone please verify whether this works with DMAC-1, or does it need the DMAC-2?

I remember messing around with A590/2091 ROMs and at least V6.6 seemed to require the DMAC-2.. :-)

29 November 2007, 09:09

can someone post the roms again in the zone?
i upgraded my harddisk & kickstart and it doesnt boot anymore.

r.cade · 30 November 2007, 04:30

I used to repair Amiga's back in the early 90's (Video Toaster systems, mostly) and I seem to recall that 7.0 was unstable. I distinctly remember downgrading the EPROMs back to 6.6 whenever we got new cards in. I couldn't begin to remember what the issue was, though.

Toni Wilen · 03 December 2007, 10:46

Some random information:

I have confirmed 6.x versions don't work very well with >1G devices. (only partitions that are under 1G mount properly)

Easy workaround: use PFS3ds (PFS3 with direct scsi). It seems to work fine, at least on CDTV. Tested with 4G CF card on SCSI-IDE bridge.

(CDTV scsi.device is slightly modified 6.x version and also has >1G problem)

mrodfr · 07 December 2007, 12:08

hello,

It's possible to repost the rom on the Zone! ????? thanks in advance.

tiffers · 29 January 2008, 16:35

another request to place the rom image in the zone again. Trying to setup an A500/A590 WinUAE config.

Thanks

Duke · 29 January 2008, 16:58

It's in the zone.

tiffers · 30 January 2008, 00:25

Quote:

Originally Posted by Duke

It's in the zone.

Thank you

TheCorfiot · 03 February 2008, 18:44

Hi Guys
Have tried downloading the zip file but keep being told it's empty when trying to uncompress. Any chase you could pls reupload, again it's for a WinUAE config.

Many thanks in advance

Duke · 03 February 2008, 19:02

IE is buggy, use Firefox, Opera or something else to download then it should work.

TheCorfiot · 03 February 2008, 19:13

cheers duke

r.cade · 03 February 2008, 19:22

The archive works for me in WinRAR.

TheCorfiot · 03 February 2008, 19:27

Got it now using opera but WinUAE still refuses to recognise the Roms when performing the rom scan

Toni Wilen · 03 February 2008, 19:31

Quote:

Originally Posted by TheCorfiot

Got it now using opera but WinUAE still refuses to recognise the Roms when performing the rom scan

"Not doing something" still isn't acceptable bug report. Please try again

Quote:

Have tried downloading the zip file but keep being told it's empty when trying to uncompress

As was explained in other thread, web server sends it gzipped and IE has issues with "double" compressed files.

TheCorfiot · 03 February 2008, 19:38

Hi Toni,

Here's a bit more depth, I downloaded the file from the zone using Opera on WinXP then uncompressed using WinRar to produce the 2 8K Rom files.
Dropping them into my "Roms" folder for WinUAE (after changing the names to include .ROM ext) and running Rom Scan a get a report back stating 2091/590 SCSI Rom unavailable.

Appreciate the help

16 February 2007, 20:07	#1
atrionfo Posts: n/a	2091 ROM Image (Version 7) I purchased two four GB SCSI hard drives on Ebay without realizing that I needed version 7 ROMs on the 2091 in order to see the drive properly (I currently have version 6.6 installed on the 2091 card). My friend lent me his EPROM burner and I figured that I could just erase my 6.6 ROMs and then burn the 7.0 ROMs. The only problem is, I've been searching the Internet for a couple of days and I can't find the 2091 version 7.0 ROM images anywhere. Does anyone have a copy that they can email me? (Or is there an area on this message board to post temp files like this?) Thanks! Adam

03 February 2008, 18:44	#14
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	A2091/A590 Boot Rom Hi Guys Have tried downloading the zip file but keep being told it's empty when trying to uncompress. Any chase you could pls reupload, again it's for a WinUAE config. Many thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MacroSystems Warp Engine ROM image	Toni Wilen	request.Other	13	10 July 2021 22:47
A590/2091 Rom	caver99	support.WinUAE	6	16 March 2014 07:43
Which ROM image for A3000 emulation?	amigafreak68k	support.FS-UAE	12	18 May 2013 23:24
Action Replay ROM image	guest	support.WinUAE	4	04 January 2003 07:42
Rom Image Not Loaded/Found	Caligula	support.WinUAE	3	25 May 2002 22:41

17 February 2007, 19:42	#2
TjLaZer Registered User Join Date: Sep 2004 Location: Tacoma, WA USA Age: 52 Posts: 1,915	in the zone

19 February 2007, 09:58	#4
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	Out of curiosity would these ROMS be compatible with an A590?

20 February 2007, 06:18	#5
TjLaZer Registered User Join Date: Sep 2004 Location: Tacoma, WA USA Age: 52 Posts: 1,915	Yes!

23 February 2007, 09:36	#6
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,861	Someone please verify whether this works with DMAC-1, or does it need the DMAC-2? I remember messing around with A590/2091 ROMs and at least V6.6 seemed to require the DMAC-2.. :-)

29 November 2007, 09:09	#7
massivekid Posts: n/a	can someone post the roms again in the zone? i upgraded my harddisk & kickstart and it doesnt boot anymore.

30 November 2007, 04:30	#8
r.cade Registered User Join Date: Aug 2006 Location: Augusta, Georgia, USA Posts: 550	I used to repair Amiga's back in the early 90's (Video Toaster systems, mostly) and I seem to recall that 7.0 was unstable. I distinctly remember downgrading the EPROMs back to 6.6 whenever we got new cards in. I couldn't begin to remember what the issue was, though.

03 December 2007, 10:46	#9
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	Some random information: I have confirmed 6.x versions don't work very well with >1G devices. (only partitions that are under 1G mount properly) Easy workaround: use PFS3ds (PFS3 with direct scsi). It seems to work fine, at least on CDTV. Tested with 4G CF card on SCSI-IDE bridge. (CDTV scsi.device is slightly modified 6.x version and also has >1G problem)

07 December 2007, 12:08	#10
mrodfr Registered User Join Date: Jan 2005 Location: 62-France Age: 56 Posts: 413	hello, It's possible to repost the rom on the Zone! ????? thanks in advance.

29 January 2008, 16:35	#11
tiffers Registered User Join Date: Aug 2007 Location: Perth / Australia Posts: 20	another request to place the rom image in the zone again. Trying to setup an A500/A590 WinUAE config. Thanks

29 January 2008, 16:58	#12
Duke HOL-Team Join Date: Apr 2002 Location: Germany Age: 43 Posts: 520	It's in the zone.

03 February 2008, 19:02	#15
Duke HOL-Team Join Date: Apr 2002 Location: Germany Age: 43 Posts: 520	IE is buggy, use Firefox, Opera or something else to download then it should work.

03 February 2008, 19:13	#16
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	cheers duke

03 February 2008, 19:22	#17
r.cade Registered User Join Date: Aug 2006 Location: Augusta, Georgia, USA Posts: 550	The archive works for me in WinRAR.

03 February 2008, 19:27	#18
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	Got it now using opera but WinUAE still refuses to recognise the Roms when performing the rom scan

03 February 2008, 19:38	#20
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	Hi Toni, Here's a bit more depth, I downloaded the file from the zone using Opera on WinXP then uncompressed using WinRar to produce the 2 8K Rom files. Dropping them into my "Roms" folder for WinUAE (after changing the names to include .ROM ext) and running Rom Scan a get a report back stating 2091/590 SCSI Rom unavailable. Appreciate the help

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)