05 October 2011, 14:45 | #1 |
Registered User
Join Date: Feb 2011
Location: Wales
Posts: 279
|
HxC Floppy Emulator for CDTV, cannot get DF0 and DF1 working
I have a Commodore CDTV and a HxC floppy disk emulator. I've got the single disk (DF0) set-up working well, but I have to use the buttons to swap disks when prompted. I can't seem to get a second disk drive "Drive B" (DF1) to work.
The HxC is connected to the "controller board" that I took out of an old Amiga external floppy drive. The external floppy controller is connected to the CDTV via the floppy port at the back of the machine. The main question is can the HxC operate two drives (A+B) from a single external floppy drive interface? Has anyone done this before or even got two drives working when connecting internally? I can see that most HxC users are connecting directly to a machine's internal floppy drive connector, whereas I am connecting to an external disk drive's interface. Do you think there is something wrong with my HxC set-up or configuration that would prevent drive B (DF1) from working or just that it can't have a second drive running off an external disk drive controller board? Pics are in http://eab.abime.net/showthread.php?t=61244 Thanks (I've also posted this on the HxC forum) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thoughts on the HxC Floppy Emulator. | ElectroBlaster | support.Hardware | 26 | 12 August 2013 05:52 |
USB HxC Floppy emulator and SD HxC Floppy Emulator by Lotharek on ext FDD | dirkies | Amiga scene | 1 | 03 April 2012 00:08 |
Transparent External Enclosure for HxC Floppy Emulator for CDTV | CDTV1991 | support.Hardware | 9 | 07 February 2012 22:03 |
HXC Sd Floppy emulator on A600 | lolafg | support.Hardware | 17 | 13 April 2010 19:53 |
HxC Floppy emulator | Faerytale | Hardware mods | 7 | 17 February 2008 12:41 |
|
|