13 March 2020, 16:08 | #1 |
Retro maniac
Join Date: May 2005
Location: Finland
Age: 49
Posts: 1,219
|
Advanced Amiga Analyzer v1.1
Hello,
Just used the program AAA to test my A4000s Parallel & Serial ports and got some ( pretty bad) error messages. I can' t recall exactly from where I got this Analyzer program from ( maybe EAB ?!), but I just found that the program needs some hardware part(?!) Installed ?! If that' s true, maybe my test results are not valid at all. Currently, I have no peripherals to install to the Parallel & Serial ports of my A4000, expect from the Midi Interface that I just bought ( untested). It is for the Serial port, I assume ..?! Before I have some Midi devices / cables etc, how could I test that Midi Interface device ? If I wanted to test my P&S ports in practise, would an old printer and maybe a null- modem cable be enough ? I strongly suspect the results of Advanced A Analyzer app, because my machine is generally working ok and is in moderately good condition overall. However, I think the PSU ( original A4000D) may not be sufficient overall for my setup ( 4 zorro cards etc)..?!? So, could too low a current / voltage cause AAA prog to give failure result on Parallel and/ or Serial ports test ..?! ( No devices connected on those ports!) |
13 March 2020, 16:57 | #2 |
www.resistance.no
Join Date: Jun 2008
Location: Norway
Age: 43
Posts: 200
|
This software came with one of these:
https://www.bigbookofamigahardware.c...ct.aspx?id=803 And yes, you need this one to be able to fully use it. I have one and its a nice piece of kit. |
13 March 2020, 18:51 | #3 |
Retro maniac
Join Date: May 2005
Location: Finland
Age: 49
Posts: 1,219
|
Anyone there to try Advanced Amiga Analyzer, v1.1 on A4000D;
to test Serial & Parallel ports (without any devices connected on those ports) and confirm my test results ? |
13 March 2020, 20:59 | #4 |
Registered User
Join Date: Apr 2010
Location: Italy
Posts: 1,136
|
you need insert a cable with some jumper, view the screen of aaa for right connection
tomorrow ia can send some screen of test withut cable |
15 March 2020, 15:58 | #5 |
Retro maniac
Join Date: May 2005
Location: Finland
Age: 49
Posts: 1,219
|
A cable with some jumper...?
|
16 March 2020, 10:02 | #6 |
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,334
|
Yeah, it needs some of the pins connected together, so it can test their input and output and read the results. It's the same story with DiagROM and AmigaTestKit - there's no other way to check if the pins are physically outputting what they should be.
|
19 March 2020, 16:31 | #7 |
Retro maniac
Join Date: May 2005
Location: Finland
Age: 49
Posts: 1,219
|
Someone there could upload the boot floppy ( ?!) of AAA in Adf/ Dms format ?
|
23 June 2023, 21:00 | #8 |
Retro maniac
Join Date: May 2005
Location: Finland
Age: 49
Posts: 1,219
|
Should the test port dongles that AmigaTestkit uses,
be compatible with Analyzer program also...?! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compute!'s Advanced Amiga BASIC | amiwolf | request.Apps | 0 | 12 January 2019 21:49 |
Advanced Amiga Analyzer 2.0 | Nibbler | support.Hardware | 2 | 14 July 2016 13:30 |
Logic Analyzer for Amiga motherboard repair | majsta | Hardware mods | 0 | 21 September 2012 21:31 |
Logic Analyzer ??????? | Dimlow | support.Hardware | 7 | 25 September 2008 17:29 |
Wilcom Amiga Analyzer Software | jabsy | request.Apps | 2 | 27 July 2007 05:41 |
|
|