Expansion board for the CD32 - Page 170

Amiga1992 · 10 April 2018, 01:20

To be fair, it's not like this person is hiding where these come from or who makes them so, if anyone pays that price, is out of stupidity, which is a very plausible scenario.

plasmab · 10 April 2018, 08:49

Quote:

Originally Posted by Akira

To be fair, it's not like this person is hiding where these come from or who makes them so, if anyone pays that price, is out of stupidity, which is a very plausible scenario.

Yup I have no issue with this except that I’ve never sold that board in black with my logo on.

alexh · 10 April 2018, 09:36

Quote:

Originally Posted by plasmab

Yup I have no issue with this except that I’ve never sold that board in black with my logo on.

Is the logo on the open-source silkscreen in GIT? If so they probably just made their own batch and never changed anything?

plasmab · 10 April 2018, 10:11

Quote:

Originally Posted by alexh

Is the logo on the open-source silkscreen in GIT? If so they probably just made their own batch and never changed anything?

Nope. I remove my logo in git. My logo exists in my private scm only

alenppc · 10 April 2018, 17:38

Quote:

Originally Posted by spudje

Somebody making some profit here over the back of people like plasmab and kipper2k

https://www.ebay.de/itm/amiga-cd32-e...-/332607173920

269!! Holy crap, somebody is out to rip people off. You can buy 4 full sets from me for that price.

Bet you anything those boards don't even have the bevelled edge. Oh and no return, no guarantees, no support either from this dude.

Sometimes I wonder if I should offer my boards on ebay, even though I hate dealing with them.

plasmab · 10 April 2018, 18:05

Quote:

Originally Posted by alenppc

269!! Holy crap, somebody is out to rip people off. You can buy 4 full sets from me for that price.

Bet you anything those boards don't even have the bevelled edge. Oh and no return, no guarantees, no support either from this dude.

Sometimes I wonder if I should offer my boards on ebay, even though I hate dealing with them.

I hate eBay but i put my boards on there bare to stop people changing 25 quid for a blank.

alenppc · 10 April 2018, 19:01

I am gonna put a couple of boards up for the same reason

cip060 · 11 April 2018, 09:49

270!!!crazy

alenppc · 11 April 2018, 16:29

Ok I listed 2 sets for sale on EvilBay. The price is higher than on Amibay because of Ebay listing fees and unfortunately the shipping option comes out insanely expansive through the ebay interface but the whole scope of this listing is to offer an alternative to predatory pricing of the other listing.

You can still buy a set from me (& supaduper) through Amibay for the usual amounts and save yourself a ton of money and hassle.

plasmab · 11 April 2018, 16:31

Quote:

Originally Posted by alenppc

Ok I listed 2 sets for sale on EvilBay. The price is higher than on Amibay because of Ebay listing fees and unfortunately the shipping option comes out insanely expansive through the ebay interface but the whole scope of this listing is to offer an alternative to predatory pricing of the other listing.

You can still buy a set from me (& supaduper) through Amibay for the usual amounts and save yourself a ton of money and hassle.

Yup. eBay takes a huge cut. Thats why my ebay listings are usually %20 higher than the AmiBay ones.

cip060 · 04 June 2018, 00:20

You can kindly try brian the lion cd32 whdload to me it does not work black screen after choosing the language

Anachronist · 04 June 2018, 03:20

Man, that FWSi looks sweet.

Cobe · 27 June 2018, 21:21

I'don't know how but I stumbled on this recently
http://aminet.net/package/disk/misc/LightUp10
Once you run this program, any reading or writing to the SX-1's hard drive
will make the CD32's power LED flicker. So now you can tell when the hard
drive's being used, which is quite useful 'cos you can knacker everything if
your hard drive's being written to and you press reset.

I gave it a go but nothing. Snoopdos says FindPort Fail
It would be neat if it could be made run somehow...

MickGyver · 28 June 2018, 07:06

This has probably been asked already but can I program the TF328 without having it connected to my CD32? I guess I would need to supply power to the board in that case at least...

RiotRetroGaming · 06 July 2018, 14:46

Hi guys,

Long time no speak.
My CD32 is running dual CF fine with PFS3 - I'm not sure if you've tried it or not?

The complete thread is here:
http://eab.abime.net/showpost.php?p=1217953&postcount=1

05 September 2018, 00:26

I have a problem with TF328, not one but two

First one is no bot from CD (cdrom sounds quiet),second one is mouse not working with PIC16F627, without works fine (mmkeyboard A500 inside PIC).
Can anyone help me?

plasmab · 05 September 2018, 00:37

Quote:

Originally Posted by dotmod

I have a problem with TF328, not one but two

First one is no bot from CD (cdrom sounds quiet),second one is mouse not working with PIC16F627, without works fine (mmkeyboard A500 inside PIC).
Can anyone help me?

I've not heard of the reports of the first issue.. Second issue i have heard of
and *can* be down to an older firmware in the PIC. I think there are updates but since i dont actually have one of those risers handy i cant check... presume its a kipper riser?

05 September 2018, 00:51

Quote:

Originally Posted by plasmab

I've not heard of the reports of the first issue.. Second issue i have heard of
and *can* be down to an older firmware in the PIC. I think there are updates but since i dont actually have one of those risers handy i cant check... presume its a kipper riser?

Yeah, Kipper2K

plasmab · 05 September 2018, 01:55

who built your other TF328?

05 September 2018, 09:55

Me, I have two of them and both works fine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hello and help identifying my expansion board!	edd_jedi	New to Emulation or Amiga scene	7	04 April 2010 12:52
Can anyone identify this RAM expansion board??	PowerPie5000	support.Hardware	66	02 August 2009 13:04
WTB: A1200 Expansion Board	robheaton	MarketPlace	17	11 June 2009 09:49
an expansion board toolkit --might be useful to you	giannis_vassili	support.Hardware	1	14 June 2008 20:51
Wanted: A1200 expansion board	Freckle	MarketPlace	0	30 August 2004 16:36

10 April 2018, 01:20	#3381
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,645	To be fair, it's not like this person is hiding where these come from or who makes them so, if anyone pays that price, is out of stupidity, which is a very plausible scenario.

10 April 2018, 19:01	#3387
alenppc Registered User Join Date: Apr 2012 Location: Canada Age: 44 Posts: 910	I am gonna put a couple of boards up for the same reason

11 April 2018, 09:49	#3388
cip060 Registered User Join Date: Dec 2016 Location: Treviso ITALIA Posts: 81	270!!!crazy

11 April 2018, 16:29	#3389
alenppc Registered User Join Date: Apr 2012 Location: Canada Age: 44 Posts: 910	Ok I listed 2 sets for sale on EvilBay. The price is higher than on Amibay because of Ebay listing fees and unfortunately the shipping option comes out insanely expansive through the ebay interface but the whole scope of this listing is to offer an alternative to predatory pricing of the other listing. You can still buy a set from me (& supaduper) through Amibay for the usual amounts and save yourself a ton of money and hassle.

04 June 2018, 00:20	#3391
cip060 Registered User Join Date: Dec 2016 Location: Treviso ITALIA Posts: 81	You can kindly try brian the lion cd32 whdload to me it does not work black screen after choosing the language

04 June 2018, 03:20	#3392
Anachronist Registered User Join Date: Apr 2017 Location: Raleigh, NC Posts: 71	Man, that FWSi looks sweet.

27 June 2018, 21:21	#3393
Cobe Registered User Join Date: Jan 2014 Location: Belgrade / Serbia Age: 41 Posts: 999	I'don't know how but I stumbled on this recently http://aminet.net/package/disk/misc/LightUp10 Once you run this program, any reading or writing to the SX-1's hard drive will make the CD32's power LED flicker. So now you can tell when the hard drive's being used, which is quite useful 'cos you can knacker everything if your hard drive's being written to and you press reset. I gave it a go but nothing. Snoopdos says FindPort Fail It would be neat if it could be made run somehow...

28 June 2018, 07:06	#3394
MickGyver Registered User Join Date: Oct 2008 Location: Finland Posts: 643	This has probably been asked already but can I program the TF328 without having it connected to my CD32? I guess I would need to supply power to the board in that case at least...

06 July 2018, 14:46	#3395
RiotRetroGaming Riot Retro Gaming Join Date: Sep 2017 Location: Sittingbourne Posts: 268	Hi guys, Long time no speak. My CD32 is running dual CF fine with PFS3 - I'm not sure if you've tried it or not? The complete thread is here: http://eab.abime.net/showpost.php?p=1217953&postcount=1

05 September 2018, 00:26	#3396
dotmod Posts: n/a	I have a problem with TF328, not one but two First one is no bot from CD (cdrom sounds quiet),second one is mouse not working with PIC16F627, without works fine (mmkeyboard A500 inside PIC). Can anyone help me?

05 September 2018, 01:55	#3399
plasmab Banned Join Date: Sep 2016 Location: UK Posts: 2,917	who built your other TF328?

05 September 2018, 09:55	#3400
dotmod Posts: n/a	Me, I have two of them and both works fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)