02 August 2014, 14:36 | #1 |
Registered User
Join Date: May 2014
Location: Italy
Posts: 419
|
Keep Active control panel "Line Mode" and "Interlaced Line Mode"
Hi Tony,
ip possibile keep alive control panel "Line Mode" and "Interlaced Line Mode" when direct draw is active and Resolution Autoshich is on. Thanks. By. |
02 August 2014, 20:10 | #2 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,593
|
You still haven't replied why do you need DirectDraw mode? It is mostly obsolete.
D3D mode should do everything (and more) unless you have ancient PC but then you should't use any special features to reduce slowdowns as much as possible. |
02 August 2014, 21:30 | #3 |
Registered User
Join Date: May 2014
Location: Italy
Posts: 419
|
...because the image is reality; i prefer see the image without filter and 3d correction.
|
02 August 2014, 21:50 | #4 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,593
|
Why do you think D3D can't be pixel perfect? You have config error somewhere, possibly even display driver control panel setting if you get blurry output in D3D mode. (also make sure filter mode is "no filtering", not "default")
|
02 August 2014, 23:08 | #5 | |
Registered User
Join Date: May 2014
Location: Italy
Posts: 419
|
Quote:
iI do a test; and the original scanline (in Menu Line mode) is more real; there is scanline when use resolution with 256pixel in Heigh and there isn't when use the resolution with 512pixel in Heigh; It possibile keep active the Menu Line mode when it set Resolution AutoSwitch On? Very Thanks. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
International Sports Challenge problemException "Line 1111 Emulator" ($2C) at $FFFFFF | alkis21 | project.WHDLoad | 3 | 24 May 2014 19:23 |
WHDLoad Errors: Exception "Line 1111 Emulator" | vext01 | support.Apps | 15 | 17 February 2014 09:00 |
"Exception "Line 1111 Emulator" ($2c) Error at $1004" when exiting game | demolition | support.WinUAE | 15 | 30 November 2012 16:43 |
One "hole" in each scan line to turn off blitter nasty? | mc6809e | Coders. Asm / Hardware | 1 | 03 July 2012 12:12 |
Nightbreed Interactive Movie - "Line 1111 Emulator" exception | MethodGit | project.WHDLoad | 5 | 18 April 2007 15:27 |
|
|