WTB: 1084 RGB cable (old round type)

T_hairy_bootson · 19 November 2005, 14:14

Afriend of mine has just picked up a 1084 monitor for his A1200 and is running it using composite output.

So if anyone has an RGB cable with the older round type connector at the monitor end rather than the 9pin D type connector they can spare please let me know.

gizmomelb · 22 November 2005, 02:58

Hiya,

I was going through my amiga gear last night and I found what appears to be an RGB monitor cable with 6 pins at one end and the 25 (?) pin connector for the Amiga video port at the other. Unfortunately the round end doesn't match either of my 1084 monitors, so no idea if it works etc. I can take a photo tonight if you want to check it out.

conversely, I'm after an RGB DB9 cable, so if you've got one of those maybe we can swap (I'm also in Melbourne)

regards,
Gizmomelb

T_hairy_bootson · 22 November 2005, 03:02

Yes please, sounds like the right cable.

gizmomelb · 22 November 2005, 03:05

ahh, the ol' reply while I'm editing trick hey?

any chance you've got a RGB DB9 cable for swappage?

T_hairy_bootson · 22 November 2005, 03:10

Actually I should have, will have a look when I get home from work but I am 95% sure I do have a spare.

T_hairy_bootson · 22 November 2005, 11:45

Heh, so I went looking for the 9pin "D" cable and found two of the round type cables... So I'm all set. Thanks for the offer gizmomelb but I will not be needing to trade after all.

mods can close this thread or just let it die.

gizmomelb · 23 November 2005, 00:35

no problems,

so do you want to sell/trade the 9pin 'D' cable you've got? (I've got a heap of boxed original software/utils which I'm going to be offloading to ebay soon-including stuff not on HOL-so I need to do some scanning as well).

Regards,
Gizmomelb

T_hairy_bootson · 23 November 2005, 00:45

I will probably end up finding the spare 9pin "D" cable when I go looking for something else, always the way. I will keep you posted if it turns up.

19 November 2005, 14:14	#1
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 47 Posts: 2,084	WTB: 1084 RGB cable (old round type) Afriend of mine has just picked up a 1084 monitor for his A1200 and is running it using composite output. So if anyone has an RGB cable with the older round type connector at the monitor end rather than the 9pin D type connector they can spare please let me know.

22 November 2005, 02:58	#2
gizmomelb Registered User Join Date: Sep 2005 Location: melbourne Age: 55 Posts: 541	Hiya, I was going through my amiga gear last night and I found what appears to be an RGB monitor cable with 6 pins at one end and the 25 (?) pin connector for the Amiga video port at the other. Unfortunately the round end doesn't match either of my 1084 monitors, so no idea if it works etc. I can take a photo tonight if you want to check it out. conversely, I'm after an RGB DB9 cable, so if you've got one of those maybe we can swap (I'm also in Melbourne) regards, Gizmomelb Last edited by gizmomelb; 22 November 2005 at 03:04.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PC to 1084 : RGB or S-Video?	Andymiga	support.Hardware	28	14 October 2012 17:05
WTB: amiga RGB video cable.	sovietconscript	MarketPlace	2	03 March 2012 21:06
WTB: rgb to 1084 monitor lead	DoogUK	MarketPlace	6	07 February 2009 16:26
WTB: Monitor Cable for 1084	APFelon	MarketPlace	3	27 May 2007 02:37
1084 cable problem.	Wally	support.Hardware	8	12 February 2003 00:38

22 November 2005, 03:02	#3
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 47 Posts: 2,084	Yes please, sounds like the right cable.

22 November 2005, 03:05	#4
gizmomelb Registered User Join Date: Sep 2005 Location: melbourne Age: 55 Posts: 541	ahh, the ol' reply while I'm editing trick hey? any chance you've got a RGB DB9 cable for swappage?

22 November 2005, 03:10	#5
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 47 Posts: 2,084	Actually I should have, will have a look when I get home from work but I am 95% sure I do have a spare.

22 November 2005, 11:45	#6
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 47 Posts: 2,084	Heh, so I went looking for the 9pin "D" cable and found two of the round type cables... So I'm all set. Thanks for the offer gizmomelb but I will not be needing to trade after all. mods can close this thread or just let it die.

23 November 2005, 00:35	#7
gizmomelb Registered User Join Date: Sep 2005 Location: melbourne Age: 55 Posts: 541	no problems, so do you want to sell/trade the 9pin 'D' cable you've got? (I've got a heap of boxed original software/utils which I'm going to be offloading to ebay soon-including stuff not on HOL-so I need to do some scanning as well). Regards, Gizmomelb

23 November 2005, 00:45	#8
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 47 Posts: 2,084	I will probably end up finding the spare 9pin "D" cable when I go looking for something else, always the way. I will keep you posted if it turns up.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)