4GB CF IDE HARD DRIVE www.amigakit.com

amigakit.com · 18 July 2010, 21:43

We are pleased to announce that we have just secured a large batch of 4GB CF IDE hard disks prepped/formatted ready for Amiga 1200, 600 or 4000 (specify on ordering from AmigaKit store)

The advantages of our drives are:
- completely silent operation
- responsive drives that run cool
- fully prepped and formatted with our installation software pre-installed
- high quality media fully compatible with Amiga

Direct Product Links

USA Store:
http://www.amigakit.us/product_info.php?products_id=883

UK Store:
http://amigakit.leamancomputing.com/...roducts_id=883

European Store:
http://amigakit.leamancomputing.com/...roducts_id=883

Canadian Store:
http://amigakit.leamancomputing.com/...roducts_id=883

www.amigakit.com Amiga Computer Store

Wasagi · 18 July 2010, 22:14

Do these offer any advantages over me purchasing a normal 4gb CF card and CF to IDE interface?

amigakit.com · 18 July 2010, 22:17

Yes, fully prepped, formatted with our OS-Install software and we can provide with SFS is required.

Also we use high quality compatible cards - unlike some Ebay sellers who sell for a lot higher price.

Wasagi · 18 July 2010, 22:19

Oh cool. Completely missed that part, even if it was in the screenshot! D'oh :s

Peter · 18 July 2010, 22:20

Does the Amiga Hard drive activity light work with these?

amigakit.com · 18 July 2010, 22:27

Yes it does :-)

prowler · 18 July 2010, 22:36

Thanks for the info, AmigaKit!

It looks like another one of your trademark all-in-one solutions!

amigakit.com · 18 July 2010, 22:40

Happy to help

Omolungo · 18 July 2010, 23:09

Another question: if I would subdivide the 4GB CF in 2 partition of 2 GB can I use simply HDtoolbox?

And how we have to set the max transfert?

It is fully compatible with games and programs?

amigakit.com · 18 July 2010, 23:11

We set the MaxTransfer for you and we partition as three partitions for you:

SYS: DH1: DH2:

You dont need to do any hard work

Omolungo · 18 July 2010, 23:19

Ok, but if I would work on it as on a normal HD, should I use Hdtoolbox to make my two own partition (or you can do it for me)?

And it works as well as with 3.0 and 3.1 KS?

amigakit.com · 18 July 2010, 23:27

We can do it for you- just ask when ordering (remember OS 3.x requires partitions of 2GB max without patches)

Yes it works as a normal Hard Disk with either Kickstart 3.0, Kickstart 3.1 or Kickstart 2.05

Anemos · 18 July 2010, 23:32

at first.. amigakit

Quote:

- fully prepped and formatted with our installation software pre-installed

how many partition on it?

Omolungo · 18 July 2010, 23:34

Thanks for your effort, I'll evaluate to buy one of it

amigakit.com · 18 July 2010, 23:40

@Anemos
You decide how you want the drive prepped/formatted/partitioned - our technician can help you with a bespoke configuration.

@Omolungo

Many thanks :-)

FOL · 18 July 2010, 23:55

Quote:

Originally Posted by Anemos

how many partition on it?

What you like,

.

Omolungo · 07 August 2010, 00:05

@ amigakit

I received the CF kit, and it works very well

As I have another CF, there could be the possibility to buy from you only the adapter board?

amigakit.com · 07 August 2010, 00:28

Good! We sell them as a complete kit, I will have to check if we have any spare adapters.

Omolungo · 07 August 2010, 08:44

Let me know, in that case i'll take the adapter

cosmicfrog · 08 August 2010, 19:59

remember OS 3.x requires partitions of 2GB max without patches

surly that should be 4 gig

18 July 2010, 21:43	#1
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	4GB CF IDE HARD DRIVE www.amigakit.com We are pleased to announce that we have just secured a large batch of 4GB CF IDE hard disks prepped/formatted ready for Amiga 1200, 600 or 4000 (specify on ordering from AmigaKit store) The advantages of our drives are: - completely silent operation - responsive drives that run cool - fully prepped and formatted with our installation software pre-installed - high quality media fully compatible with Amiga Direct Product Links USA Store: http://www.amigakit.us/product_info.php?products_id=883 UK Store: http://amigakit.leamancomputing.com/...roducts_id=883 European Store: http://amigakit.leamancomputing.com/...roducts_id=883 Canadian Store: http://amigakit.leamancomputing.com/...roducts_id=883 www.amigakit.com Amiga Computer Store

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seagate ST38410A 8.4GB IDE Hard Drive, please?	prowler	request.Other	46	13 September 2013 22:50
A590 and 4gb hard drive	2E0TMF	support.Hardware	41	04 January 2011 06:01
4GB CF IDE HARD DISK www.amigakit.com	amigakit.com	MarketPlace	0	22 September 2010 14:24
after a 4gb 2.5" hard drive	CU_AMiGA	MarketPlace	9	02 March 2008 19:17
6.4Gb Hard Drive in winuae	pvt_beano	support.WinUAE	2	19 January 2006 10:05

18 July 2010, 22:14	#2
Wasagi Registered User Join Date: Jun 2010 Location: Essex / United Kingdom Posts: 264	Do these offer any advantages over me purchasing a normal 4gb CF card and CF to IDE interface?

18 July 2010, 22:17	#3
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	Yes, fully prepped, formatted with our OS-Install software and we can provide with SFS is required. Also we use high quality compatible cards - unlike some Ebay sellers who sell for a lot higher price.

18 July 2010, 22:19	#4
Wasagi Registered User Join Date: Jun 2010 Location: Essex / United Kingdom Posts: 264	Oh cool. Completely missed that part, even if it was in the screenshot! D'oh :s

18 July 2010, 22:20	#5
Peter Still an Amiga user Join Date: Nov 2006 Location: Kent Age: 55 Posts: 2,715	Does the Amiga Hard drive activity light work with these?

18 July 2010, 22:27	#6
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	Yes it does :-)

18 July 2010, 22:36	#7
prowler Global Moderator Join Date: Aug 2008 Location: Sidcup, England Posts: 10,300	Thanks for the info, AmigaKit! It looks like another one of your trademark all-in-one solutions!

18 July 2010, 22:40	#8
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	Happy to help

18 July 2010, 23:09	#9
Omolungo Registered User Join Date: Nov 2009 Location: Livorno, Italy Posts: 398	Another question: if I would subdivide the 4GB CF in 2 partition of 2 GB can I use simply HDtoolbox? And how we have to set the max transfert? It is fully compatible with games and programs?

18 July 2010, 23:11	#10
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	We set the MaxTransfer for you and we partition as three partitions for you: SYS: DH1: DH2: You dont need to do any hard work

18 July 2010, 23:19	#11
Omolungo Registered User Join Date: Nov 2009 Location: Livorno, Italy Posts: 398	Ok, but if I would work on it as on a normal HD, should I use Hdtoolbox to make my two own partition (or you can do it for me)? And it works as well as with 3.0 and 3.1 KS?

18 July 2010, 23:27	#12
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	We can do it for you- just ask when ordering (remember OS 3.x requires partitions of 2GB max without patches) Yes it works as a normal Hard Disk with either Kickstart 3.0, Kickstart 3.1 or Kickstart 2.05

18 July 2010, 23:34	#14
Omolungo Registered User Join Date: Nov 2009 Location: Livorno, Italy Posts: 398	Thanks for your effort, I'll evaluate to buy one of it

18 July 2010, 23:40	#15
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	@Anemos You decide how you want the drive prepped/formatted/partitioned - our technician can help you with a bespoke configuration. @Omolungo Many thanks :-)

07 August 2010, 00:05	#17
Omolungo Registered User Join Date: Nov 2009 Location: Livorno, Italy Posts: 398	@ amigakit I received the CF kit, and it works very well As I have another CF, there could be the possibility to buy from you only the adapter board?

07 August 2010, 00:28	#18
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,017	Good! We sell them as a complete kit, I will have to check if we have any spare adapters.

07 August 2010, 08:44	#19
Omolungo Registered User Join Date: Nov 2009 Location: Livorno, Italy Posts: 398	Let me know, in that case i'll take the adapter

08 August 2010, 19:59	#20
cosmicfrog The 1 who ribbits Join Date: Apr 2006 Location: leek, Staffs, UK Age: 56 Posts: 3,557	remember OS 3.x requires partitions of 2GB max without patches surly that should be 4 gig

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)