Populous 2 WHDLoad problems

[avinitlarge]

Does a working version of populous 2 for whdload exist?

I’ve tried 4 different versions for various sources but non work properly, 1 won’t install, 2 versions of the game plays too fast and the other black screens randomly but plays at the correct speed ?

[jotd]

do you have the latest .slave? it's been updated with speed regulation a few months ago

[avinitlarge]

Yes, that’s the one that randomly blacks out/crashes

[Retroplay]

Blacks out ? Like stutters every once in a while ?
If so, is PRELOAD tool type enabled and do you have sufficient fast ram to preload the game ?

[avinitlarge]

Screen goes black, unresponsive and have to reset. A500 with 030, 2mb chip and 64mb fast

[Retroplay]

Have you tried the preinstalled game ?
http://grandis.nu/eabsearch/search.p...=&httplinks=on

[jotd]

yeah probably missing preload issue. Game is made of insane number of small files. Without PRELOAD it probably flashes like crazy.

[avinitlarge]

I’m sure I tried both of them but they played too fast. I’ll double check tomorrow though.

[jotd]

plays too fast: check the version of the .slave (what is displayed in the splash screen window, which version).

preinstalled packs sometimes have outdated slaves. Happens all the time.

[Retroplay]

Mine doesn't, at least not if grabbed from the constantly updated packs on the ftp.

Mileage may vary if from whdownload.com (which I have nothing to do with).

[PopoCop]

I have the same problem. Populous II installed with latest WHDLoad slave. There is a "disable speed regulation" option on the splash screen but checking or unchecking it doesn't change anything. Game is too fast. I am now on level 193 and it's impossible to play. My Amiga is A1200 + 040.

[Thorham]

Originally Posted by PopoCop

There is a "disable speed regulation" option on the splash screen but checking or unchecking it doesn't change anything. Game is too fast. I am now on level 193 and it's impossible to play. My Amiga is A1200 + 040.

Tried an older version of the WHDLoad patch (no speed option), and on an A1200 with Blizzard 1230 MK4 50mhz 68030 and also on WinUae at maximum speed, level 193 is quite beatable. Succeeded first try on both systems. Perhaps the newer version of the patch runs too fast?

[Thorham]

Figured it out. The game runs too fast, except when in full screen (numpad enter), and I usually start out in full screen.

[arcam]

I use a WHDLoad version 2.0 (30 May 2020) and all is working fine. The save is also working.

[PopoCop]

I found out that tooltype nocache slows down the game and makes it more playable. I tried this tooltype long time ago but it didn't work. Recently I discovered my stupid mistake: there was space at the end ("nocache " instead of "nocache") and that's why it didn't work.
So, after 2 years I completed level 193 .

[avinitlarge]

I managed to sort it out, can’t remember how as it was a few years ago

[Seiya]

Installed on Harddisk the game hasn't speed problems. So you could complete level 193 two years ago.

[Calabazam]

Originally Posted by PopoCop

I found out that tooltype nocache slows down the game and makes it more playable. I tried this tooltype long time ago but it didn't work. Recently I discovered my stupid mistake: there was space at the end ("nocache " instead of "nocache") and that's why it didn't work.
So, after 2 years I completed level 193 .

The game also have a slide bar in options to adjust game speed according to CPU power, as the manual warns that the game speed is CPU dependant.
Might be onlyt for custom games and not conquest though.
On 68060, a custom game with normal settings is concluded by my total obliteration in no more than 5 minutes.