08 March 2011, 19:18 | #1 |
Posts: n/a
|
help with A500, gary chip
I bought a a500 and when i tried to turn it on, the tv was black and the power led was blinking red.
i opend it upp and so that the cary chip looked a little bit odd try to take it out and broke it (two pins was broken) if it werent already broken. it looks lite the chip is sitting some kind of expansion, i took some picture and was hoping to get some help. what kind of expansion, if any, is this (it wasn´t connenting with any cables), do i need it or shoud i just put the gary chip in the socket on the motherboard? is it worth to fix the broken pins (it looks a little bitt skew (or whats the engslish word for it) anyway) or can i get a sparepart from somewere? Last edited by boson; 08 March 2011 at 19:24. |
08 March 2011, 22:07 | #2 |
A500 fan
Join Date: Dec 2009
Location: Oulu / Finland
Posts: 73
|
It's part of a memory expansion, most likely a 2MB 3-State A580 II. If it is not connected to a board in the trapdoor slot, it is useless. You can remove it and plug the Gary chip in to the motherboard.
|
08 March 2011, 22:22 | #3 |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Yes, as Antti says, prise the Gary chip out of the expansion card carefully with a small screwdriver, lifting each end of the chip a little at a time to avoid breaking the pins (though you will find them more difficult to break than the rolled pins on the expansion card), and then replace it in the original socket.
Also, don't forget to check the original socket for pieces of broken pin left behind before you insert the Gary chip. |
08 March 2011, 23:16 | #4 |
Posts: n/a
|
thanks very very much!
There is a expansion card in the trapdoor, maybay i should check the possibility to connect it, thou later on, now i want the amiga upp and running. thanks again for the informative hints |
08 March 2011, 23:29 | #5 |
Posts: n/a
|
btw
since the whole idintify-a-thing-game went so well i might as well take the oppurtinity to ask about this part that came along when i bought the a500. What is this? |
09 March 2011, 23:39 | #6 |
Registered User
Join Date: Jun 2010
Location: PL?
Posts: 2,771
|
SCART switcher? red seems to be relays toswitch between 2 SCART - one of the SCART is probably used as a source.
|
10 March 2011, 00:13 | #7 |
Registered User
Join Date: Dec 2009
Location: West Australia
Age: 47
Posts: 210
|
Got a picture of the memory card in your trapdoor?
|
10 March 2011, 14:55 | #8 |
Posts: n/a
|
i did as antii and prowler said and it worked out fine!
and as prowler pointed out there was a piece of broken pin in the motherboard socket. i will upload photos of the memory card later today. |
10 March 2011, 20:34 | #9 |
Posts: n/a
|
here is the memory card, can i use it with the above gary expantion memory?
|
10 March 2011, 22:20 | #10 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,863
|
Seems so. Please learn how to use the macro mode in your camera. Usually depicted by a flower icon.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A500 CHIP RAM ampliation. | DyLucke | support.Hardware | 50 | 06 June 2016 21:01 |
A500 - busted graphics chip? | StevenMarshall | support.Hardware | 3 | 31 December 2011 13:55 |
not enough chip ram a500? | skforty | support.Hardware | 33 | 07 August 2009 22:53 |
A500+ with 1,5 MB Chip Memory | mombasajoe | support.WinUAE | 5 | 08 May 2008 10:40 |
A500 chip demo | Afro88 | request.Demos | 3 | 28 November 2004 12:06 |
|
|