03 May 2007, 01:23 | #1 |
Posts: n/a
|
Winuae Hardfile
how the heck do i get the hardfile to be detected by winuae
system trying to emulate is A1200 Standard Configuration kickstart 3.1 200mb Hard File [Know as DH0:] the problem am having is with the hard file or hardrive as the amiga os would see it neither is the hardrive showing up in the early boot menu and hdtoolbox will not detect it either and yes i done Device=uaehf.device in hdtoolbox |
03 May 2007, 07:35 | #2 | ||
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,028
|
Quote:
Quote:
Either you enable "RDB Mode", then all fields in WinUAE's config are disabled and you can use HDToolbox to partition it, or you don't enable "RDB Mode", then you use WinUAE's config to specify the geometry and on AmigaOS you just format the drive, HDToolbox won't see it. |
||
03 May 2007, 16:26 | #3 | |
Posts: n/a
|
Quote:
|
|
03 May 2007, 20:05 | #4 |
(Amigas && Amigos)++
Join Date: Sep 2005
Location: Anrea
Posts: 999
|
The Green Amiga Alien Guides have instructions on how to setup winuae to use a hard file. This is not enabling RDB mode (no hdtoolbox) out of the two options suggested by thomas.
http://guide.abime.net/ http://guide.abime.net/wb3.1/chap1.htm It doesn't take long at all. If u were trying to do it the other way, I haven't tried that in WinUAE, but it sounds similar to a real amiga. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE fails to access empty hardfile on IDE0 | thomas | support.WinUAE | 8 | 14 April 2012 21:26 |
WinUAE hardfile corrupt "not a DOS medium" | oRBIT | support.WinUAE | 32 | 24 March 2012 08:36 |
Amiga explorer hardfile to winuae | Fabie | support.Hardware | 8 | 07 January 2010 14:59 |
Transferred Hardfile comes up as NDOS in WinUAE? | rlcarr | support.WinUAE | 0 | 26 April 2008 22:48 |
Problem with hardfile under winuae a500 emulation | _ThEcRoW | support.WinUAE | 15 | 21 December 2005 19:37 |
|
|