![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
A3000T Rebuild
So I have an A3000T that was given to me some years back.
Some users here have convinced me it is worthwhile to get it up and running again. The machine seems to have the latest buster agnus etc, it seems to have 2MB chip ram and either 2mb or 4mb fast ram. It has a standard sized PC power supply hiding inside the case of the A3000T power supply. The power connector is not connected to MB also the Battery was removed years ago. The mains cable runs to the power switch on the front. Unfortunately the keyboard switch fell apart when touched. Does anyone know of a replace barrel switch. Does anyone have a photo of the power connector colours to confirm the voltage is going to the right pins. Thanks |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2019
Location: Netherlands
Posts: 107
|
Hi!
Good project to bring an Amiga 3000T back to life, really nice machines IMHO. Attached a photo of my 3000T where you can see the colours to the MB from the power supply. I also have the service manual somewhere that I could put in the Zone for you if you do not have it. PSU pins should be : http://www.hardwarebook.info/Amiga_3000T_Power_Supply As for battery, I soldered two wires to the bottom of the PCB on the battery pins and connected a 3.6V phone battery pack. Works like a charm. I'm sure I have pictures of that as well somewhere... |
![]() |
![]() |
#3 | |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
Quote:
I found a comparison of atx and A3000t pins but I just don't know who has done what to this machine. I don't want to kill the machine first go. I am not sure what the white fuz is on the board, but I have to remove the board to find the bits of the keyboard lock. I think I also have a cyberstorm MK I and MKII around somewhere. |
|
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2019
Location: Netherlands
Posts: 107
|
If you take the system apart anyway, probably a good idea to do the INT2 modification (run a wire on the back side of the motherboard between the CPU slot and another pin on the CIA's I believe). That way SCSI on the accelerators works ;-) Let me know if you need to know which pins, I have photo's from mine.
|
![]() |
![]() |
#5 | |
Registered User
Join Date: Aug 2008
Location: London / Canada
Posts: 781
|
Quote:
The MKII should work fine in the A3000(T), check for jumper settings - google it and you will find it. Bottom line, be very careful and patient working around the board. Due to the age they are pretty fragile and the metal pins on the chips can easily break (I've broken pins off one of the chips myself ![]() Darren |
|
![]() |
![]() |
#6 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,066
|
Quote:
|
|
![]() |
![]() |
#7 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 44
Posts: 9,961
|
INT2 was not present in my A3000T at least.
|
![]() |
![]() |
#8 |
Registered User
Join Date: Sep 2019
Location: Netherlands
Posts: 107
|
|
![]() |
![]() |
#9 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,066
|
See for example https://www.bigbookofamigahardware.c...uct.aspx?id=22
Which says: INT2 Modifications Certain accelerators, primarily those with onboard SCSI may require the INT2 modification to function fully. The A3000's CPU Fast Slot does not contain the INT2 signal as found on the A3000T, A4000 and A4000T. An INT2 modification guide can be found here. Well, I guess one has to check. |
![]() |
![]() |
#10 | |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
Quote:
It has the latest IC's on it. The funny fail seems to be that someone did all of the work to build a new power supply. Looking at the wire colours referenced earlier it looks good. BUT, the power supply does not reach to the connector. I think it was a FML moment that stopped the repair of the machine. So I can possibly just get an ATX extender to bridge the gap. |
|
![]() |
![]() |
#11 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 424
|
I've tried using an ATX power supply (with significant amps on the 5v line) with an A3000T via an adaptor I made, but the machine struggled to get enough power even to display the insert floppy screen without video corruption! I have a feeling the power socket on the motherboard had corroded a bit so that is something to watch. Curious whether it's OK or not for you.
|
![]() |
![]() |
#12 |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
My A4000 converted to a tower has been running many years trouble free on an ATX power supply well 2 one died and was replaced.
That machine has 16MB ram plus Power PPC +128MB of ram, BVision, AriadneII, Vlab Motion, Tocatta, Emplant and 5 9GB SCSI drives. I pulled the power supply out of A3000T to see if I can get it to reach the connector. I can also research its model and ratings. I could hack the hole the standard A3000T power cables come out of to get the length right. My guess is that this is a an AT power supply with the A3000T 24 pin connector on it. Pin 1 seems to be wrapped into the cables but not connected, this I assume is the tick. I wil get the board out and clean it over the weekend. |
![]() |
![]() |
#13 |
Registered User
Join Date: Sep 2006
Location: New Sandusky
Posts: 949
|
Treat that machine well. A3000Ts are rare and are probably C='s finest hour in Amiga design.
|
![]() |
![]() |
#14 |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
I actually found the A3000T power supply from this machine. The person who owned it had desoldered the A3000T connector from the powersupply.
I noticed it due to commodores orange leads on the molex plugs. The question then is should I rebuild the original power supply or try and adapt a PC power supply. I also found 10 Milk crates of big box Amiga Programs. Who says hoarding can't be fun. |
![]() |
![]() |
#15 |
Registered User
Join Date: Nov 2014
Location: NSW/Australia
Posts: 462
|
I'd recommend Ian's ATX adapter and a new PC ATX PSU transplanting the internals in to your old 3000T PSU housing. I've used Ian's adapters in a few projects now and they are by far an away the best solution.
http://www.ianstedman.co.uk/Amiga/de...x_adaptor.html |
![]() |
![]() |
#16 | |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
Quote:
I might be able to use an extender for the moment. Darren |
|
![]() |
![]() |
#17 | |
Registered User
Join Date: Mar 2020
Location: Sydney, Australia
Posts: 50
|
Quote:
Can anyone confirm this as I have finally received my lithium batteries for all of my Amiga's. I am about to start rebuilding these machines. |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
CD32.co.uk - the rebuild project | earok | project.CD32 Conversion | 44 | 02 March 2019 12:57 |
Please help me rebuild a amiga 600. | bytestorm | support.Hardware | 7 | 06 December 2017 18:49 |
My A4000 rebuild | RMK | Hardware pics | 10 | 07 February 2012 02:36 |
my 1200 tower rebuild | johnim | Hardware pics | 8 | 20 July 2011 23:58 |
Got to Rebuild my A1200 | Parsec | support.Apps | 0 | 15 July 2003 00:09 |
|
|