A2000 stopped seeing right mouse button

shirsch · 20 August 2008, 03:36

This is VERY strange. All of a sudden, my trusty A2000 has stopped responding to right mouse. I've tried three different known-good meece on it and no luck. Movement is fine, left button is fine. No response at all to right button.

It's not software, since I cannot even get to the boot setup screen in the 3.1 ROMs.

Any ideas?

rkauer · 20 August 2008, 03:50

Two possibilities:

1- Busted CIA (hard to believe, since movement and left click is OK);

2- the EMI protection is open (acts like a fuse) in the mouse port, pin 9.

Did you try to use the mouse in joystick port? AFAIR, it works.

Toni Wilen · 20 August 2008, 07:50

Quote:

Originally Posted by rkauer

1- Busted CIA (hard to believe, since movement and left click is OK);

Yes, very hard to believe because only 1st button goes to CIA

2nd fire/right mouse and 3rd fire/middle mouse = Paula. (pins 32 and 33 = mouse, 34 and 35 = joystick)

EMI protection most likely or broken track, most Amiga custom chips die very rarely (CIA on the other hand..)

rkauer · 20 August 2008, 15:59

Then just a suggestion: if the sound is distorted, time for a Paula replacement. But probably, as Tony said, just the EMI protection (equivalent to a fuse) is busted.

shirsch · 22 August 2008, 03:03

Many thanks, all! Turned out to be a bit of oxidation on the Paula chip's socket. Reseated it and all's well.

20 August 2008, 03:36	#1
shirsch Zone Friend Join Date: Jun 2006 Location: Burlington, VT USA Posts: 34	A2000 stopped seeing right mouse button This is VERY strange. All of a sudden, my trusty A2000 has stopped responding to right mouse. I've tried three different known-good meece on it and no luck. Movement is fine, left button is fine. No response at all to right button. It's not software, since I cannot even get to the boot setup screen in the 3.1 ROMs. Any ideas?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A600 right mouse button not working	protek	support.Hardware	48	18 March 2013 14:57
Amiga Mouse Button Switches	amigakit.com	MarketPlace	0	09 September 2012 18:40
Right mouse button not working?	NovaCoder	project.ClassicWB	3	09 May 2011 06:26
Problem right mouse button	3dfx4ever	support.Hardware	3	17 February 2011 08:33
A2000 reset button	cosmicfrog	support.Hardware	3	03 January 2011 14:53

20 August 2008, 03:50	#2
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 57 Posts: 3,482	Two possibilities: 1- Busted CIA (hard to believe, since movement and left click is OK); 2- the EMI protection is open (acts like a fuse) in the mouse port, pin 9. Did you try to use the mouse in joystick port? AFAIR, it works.

20 August 2008, 15:59	#4
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 57 Posts: 3,482	Then just a suggestion: if the sound is distorted, time for a Paula replacement. But probably, as Tony said, just the EMI protection (equivalent to a fuse) is busted.

22 August 2008, 03:03	#5
shirsch Zone Friend Join Date: Jun 2006 Location: Burlington, VT USA Posts: 34	Many thanks, all! Turned out to be a bit of oxidation on the Paula chip's socket. Reseated it and all's well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)