07 February 2010, 12:56 | #1 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
Prb: green or red veil on my cd32 + FMV
I use my cd32(rev3.0) with a Full motion Mpeg card(rev2), but i've a green or red veil on screen. I've upgrad my firmware 40.22 to 40.30.
Can you help me to find a solution, maybe move a jumper on CN1 or another one ? http://sayasupacrew.free.fr/AmigaPic/CN1_FMV_CD32.jpg http://sayasupacrew.free.fr/AmigaPic/FMV1.JPG http://sayasupacrew.free.fr/AmigaPic/FMV2.JPG Last edited by sayasupacrew; 08 February 2010 at 08:41. |
07 February 2010, 13:40 | #2 |
A-Collector, repairments
|
CN1 arent jumper pads, its a connector, probably test connector imo.
I assume youve replaced all C250 caps without any luck. It will be pretty hard to find a bad component without scope there. |
07 February 2010, 13:43 | #3 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,337
|
Not sure what this means but do you get the same thing with the FMV cartridge removed? Most video problems I've come across are due to loose connection on the video connector. A simple solder reflow fixes it.
Are you using the SVideo socket? Composite? RF? |
07 February 2010, 14:08 | #4 |
A-Collector, repairments
|
still wonderin why he upgraded that eprom...
|
07 February 2010, 14:11 | #5 |
A-Collector, repairments
|
|
07 February 2010, 15:46 | #6 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
I've no veil with FMV removed. All the colors return
I've doing the two other test with another cd32(rev4.1 a 4.0), It's the same result all capacitors have been changed on fmv card. We thought that the firmware was too old, that's why we have upgradé the firmware. I use the compisite RF. Last edited by sayasupacrew; 25 February 2010 at 23:07. |
08 February 2010, 09:14 | #7 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
I think that the Fullmotion card is a NTSC version. But how to see it on the card ?
|
08 February 2010, 10:19 | #8 |
Amiga Fanatic
Join Date: Feb 2004
Location: North Yorkshire, UK
Age: 46
Posts: 726
|
|
08 February 2010, 11:09 | #9 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,337
|
|
08 February 2010, 12:41 | #10 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
I is only the RF video out on my CD32.
Wario17 from amigaimpact.org say that. I have just looked at my card FMV it totally identical has yours - Rev 2 - copyright 1993 only the urom is a different version here is the inscriptions: - 391777-01 - V40.22 - c COMMODORE on 1993 It is not thus a NTSC Last edited by sayasupacrew; 08 February 2010 at 22:59. |
13 March 2010, 08:21 | #11 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
Who can repair me the FMV module ?
|
13 March 2010, 08:28 | #12 |
Banned
Join Date: Jan 2007
Location: France
Posts: 655
|
I have tested this FMV on some CD32 (PAL, rev 4 and 4.1 french versions) : green veil when VCD watching and pink veil on WB !
I think the FMV is NTSC... So, how to convert it to PAL ? |
13 March 2010, 12:54 | #13 |
Zone Friend
Join Date: Apr 2005
Location: Leipzig/Germany
Age: 49
Posts: 458
|
Amiga Centre France can do such repairs. I had my FMV-card there two times. Great service, nice contact!!!
BTW never heared about such an NTSC-version of FMV-card. What happens when you switch to NTSC-mode in Early-Startup-menu and start a VideoCD later? |
13 March 2010, 22:06 | #14 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
I have to ask has Amiga Center. they say that the problem is known and repair.
Thus it is a breakdown, the price estimate 150 euros. |
14 March 2010, 05:58 | #15 |
I hate potatos and shirts
|
Maybe a longshot: how are the voltage levels from the power supply?
IIRC, the CD32 PSU barely copes with the basic unit itself (in the very common and bad Commodore style)... |
14 March 2010, 08:18 | #16 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
Wario and Me tried another PSU modified PC, the resultat is the same.
Last edited by sayasupacrew; 14 March 2010 at 08:28. |
14 March 2010, 09:26 | #17 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,861
|
Paint every component with an UV marker before you send it, then you know what he did.
AmigaCenter France gets the cards working but he never tells you what you're paying for. Could be one swapped resistor, could be something difficult. |
14 March 2010, 16:56 | #18 |
Zone Friend
Join Date: Apr 2005
Location: Leipzig/Germany
Age: 49
Posts: 458
|
@Jope: That's not true. I've got back the defect components with the original hardware.
|
14 March 2010, 18:05 | #19 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,861
|
Intriguing. I've repaired a CSMK2 and a CSPPC there and only got vague remarks like "there's something around the clock circuitry". If I hadn't asked, I wouldn't have had even that, merely a price quote.
Naturally we're paying for his expertise, but if I get just about anything else done by someone else, I know what they did / what was really wrong if I ask. Sure, the job gets done, but at least I feel a bit strange if I ask what was done and only get something very vague. |
14 March 2010, 18:43 | #20 |
Registered User
Join Date: Jul 2009
Location: noirmoutier france
Age: 54
Posts: 45
|
I is not at the moment 150 euros,has t it there another repair man ?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CD32 FMV schematics now available | Stedy | support.Hardware | 13 | 23 May 2022 21:29 |
cd32 fmv ? | turrican3 | request.UAE Wishlist | 7 | 08 July 2014 06:49 |
Prb with Worms CD32 | NewDeli | support.Games | 26 | 14 September 2009 18:07 |
CD32 FMV tracks | cane | support.Other | 22 | 17 January 2008 09:15 |
CD32 FMV Formats | THX1138 | support.Hardware | 0 | 07 November 2005 22:16 |
|
|