Cyberstorm Mk2 ( Wont Boot :( )

Zetr0 · 26 July 2009, 11:10

Hello there my fellow forum chummies,

I am in a bit of a pickle with my A4000D RevB (Buster 09)

at the moment she fires up and runs fine with my A3640 16MB Fast 2MB Chip.

however when I plum in my Cyberstorm Mk2 she just wont boot.... the power light attached just says a bright green.

My display keeps flickering a hazy black and blue (its stuck using an A520) and the colours are absolutely crap anyway so thats not gonna give you much a clue...

I have tried it with the card populated with memory and without. tried different memory and single sticks of ram.

I have also changed the CPU and the crystal (which I broke the seal on)

This card has not been over clocked in anyway.

----

One thing that did stick out is a small jumper header on the card just above the CPU, I have included a picture, I dont know what it is for. obviously I have tested it open and closed.

any ideas, I would appreciate it, or this puppy has to go-to france for some JJB love ( I dont have a scope here to figure out what )

thomas · 26 July 2009, 11:18

Change the motherboard CLK jumpers to internal. Contrary to the MK3 the MK2 needs the jumpers set to INT.

Zetr0 · 26 July 2009, 12:08

WOW!

thanks Thomas!!!! I will try that tonight.... if all works I shall send you a pint of your favourite... not sure how to get to the fatherland, but by god I will find a way!

Zetr0 · 28 July 2009, 22:07

Quote:

Originally Posted by thomas

Change the motherboard CLK jumpers to internal. Contrary to the MK3 the MK2 needs the jumpers set to INT.

Fantastic!!!

There is now one more Cyberstorm Mk2 060 powered A4000D in the world!!!

TheCorfiot · 28 July 2009, 23:31

Quote:

Originally Posted by Zetr0

Fantastic!!!

There is now one more Cyberstorm Mk2 060 powered A4000D in the world!!!

AWESOME

TC

26 July 2009, 11:10	#1
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	Cyberstorm Mk2 ( Wont Boot :( ) Hello there my fellow forum chummies, I am in a bit of a pickle with my A4000D RevB (Buster 09) at the moment she fires up and runs fine with my A3640 16MB Fast 2MB Chip. however when I plum in my Cyberstorm Mk2 she just wont boot.... the power light attached just says a bright green. My display keeps flickering a hazy black and blue (its stuck using an A520) and the colours are absolutely crap anyway so thats not gonna give you much a clue... I have tried it with the card populated with memory and without. tried different memory and single sticks of ram. I have also changed the CPU and the crystal (which I broke the seal on) This card has not been over clocked in anyway. ---- One thing that did stick out is a small jumper header on the card just above the CPU, I have included a picture, I dont know what it is for. obviously I have tested it open and closed. any ideas, I would appreciate it, or this puppy has to go-to france for some JJB love ( I dont have a scope here to figure out what ) Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cyberstorm Mk2 and OS31	Zetr0	support.Other	10	01 August 2009 07:34
[Wanted] CyberSCSI for Cyberstorm MK2	jimbo100	MarketPlace	8	05 August 2007 20:24
Cyberstorm MK2 and rom based cards	MrZammler	support.Hardware	14	20 June 2007 20:14
Cyberstorm MK2 060 for sale, shipping to any place in the world !!	Effy	MarketPlace	8	14 May 2005 11:09
0.9.9 wont even boot.	StephanK	support.WinUAE	0	04 August 2004 05:32

26 July 2009, 11:18	#2
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 7,025	Change the motherboard CLK jumpers to internal. Contrary to the MK3 the MK2 needs the jumpers set to INT.

26 July 2009, 12:08	#3
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	WOW! thanks Thomas!!!! I will try that tonight.... if all works I shall send you a pint of your favourite... not sure how to get to the fatherland, but by god I will find a way!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)