27 February 2008, 12:48 | #1 |
Registered User
Join Date: Feb 2008
Location: Chile
Posts: 15
|
Amiga 600 PAL with a 1084S-P NTSC
Hi,
i have a doubt, if possible connect this combination using a 6 to 23 cable , 6 from monitor to 23 female monitor. I think if possible cause im using rgb no composite ...any tip? thx a lot for your time |
27 February 2008, 13:35 | #2 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,460
|
Yes it will work.
Buy a cable http://cgi.ebay.com/ws/eBayISAPI.dll...m=260214794327 Or make your own http://rtfm.vtt.net/pinouts/data/Ami...nout.shtml.htm |
27 February 2008, 13:40 | #3 |
Registered User
Join Date: Feb 2008
Location: Chile
Posts: 15
|
thx man, kewl only cable need, no troubles with PAL or NTSC...
thx again |
27 February 2008, 13:41 | #4 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,460
|
Yes, that cable listed on ebay above will work great.
And there are no problems with RGB @ 50Hz with 1084 monitors. If you buy one from somewhere else, make sure it is the 6-pin one and not the later 9-pin one. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga 500+ Pal or NTSC? | Dropcheck | support.Hardware | 28 | 16 October 2015 08:52 |
Amiga 500 (PAL/NTSC) | gibs | Amiga scene | 0 | 04 December 2011 17:51 |
Modding a 1084S PAL to NTSC? | 8bitbubsy | support.Hardware | 1 | 13 November 2009 01:00 |
NTSC A500 Pal/NTSC mod pics | kipper2k | Hardware pics | 2 | 29 March 2009 07:56 |
PAL CD32 on an NTSC 1084S... | Ze_ro | support.Hardware | 12 | 20 May 2006 10:03 |
|
|