ancient configuration - uaegfx problem

[honx]

today i wanted to revisit my very first amiga emulation setup from 1999, made with winuae 0.8.8r3.
it used to work without any problem 17 years ago, but today i get following strange error attached.
what went wrong? has anything changed respectively emulating rtg since 0.8.8? how can i fix this?

[Toni Wilen]

Multiple uaegfx files (with different names) in devs:monitors?

[honx]

no, only one file in devs:monitors

[Saghalie]

Check the info on the icon. You might have double entries in there (on one icon).

[honx]

no tooltypes at all are contained in uaegfx icon. only "icon by martin huttenloher"
anyway, i managed to download an old winuae 0.8.8 release 3 for test purposes.
i had to run this old piece of emulator on an old windows 98 pc for it to work.
booting old 1999 configuration in its original home environment works no problem.
there is no uaegfx error or similar in winuae 0.8.8 r3, workbench 3.1 just boots.
something in emulation must have changed along the long journey of winuae.
before toni wilen there were matthias ortman and brian king and who else?
where can i read development history of uae/winuae? curious about beginnings.
and i'm interested in "milestones" each version of the emulator had to offer.
for example, when was aga implemented, when rtg, when was 030 added, etc.

[Toni Wilen]

Probably something must have required something manual in early days but now it loads automatically. Perhaps there is something in startup-sequence.

I don't know where to find old not-official UAE changelogs..

[prowler]

Originally Posted by honx

...anyway, i managed to download an old winuae 0.8.8 release 3 for test purposes.
i had to run this old piece of emulator on an old windows 98 pc for it to work.
booting old 1999 configuration in its original home environment works no problem.
there is no uaegfx error or similar in winuae 0.8.8 r3, workbench 3.1 just boots.
something in emulation must have changed along the long journey of winuae.
before toni wilen there were matthias ortman and brian king and who else?
where can i read development history of uae/winuae? curious about beginnings.
and i'm interested in "milestones" each version of the emulator had to offer.
for example, when was aga implemented, when rtg, when was 030 added, etc.

It sounds like you could use a compilation of old WinUAE versions before Toni Wilen became the sole developer.

I shall compile one if there is both sufficient interest and no objection.

[honx]

i would be interested indeed! but how can i run such old version like 0.8.8r3 on win7 64bit?

[prowler]

Originally Posted by honx

i would be interested indeed! but how can i run such old version like 0.8.8r3 on win7 64bit?

Your Win98 PC will run most of them, and certainly all those from 0.8.x onwards, though you may have to update the DirectX drivers for the later ones.

[honx]

so not possible to run all versions on my recent pc?
i was going to bury the win98 pc in basement again.

[prowler]

Originally Posted by honx

so not possible to run all versions on my recent pc?

No; not if version 0.8.8 r3 didn't work.

Originally Posted by honx

i was going to bury the win98 pc in basement again.

Keep it handy, and watch this space.

[Tomislav]

WinUAE 1.4.6 is last version that I know that work on Win9x.
UAEGfx* files are unchanged from WinUAE 0.8.8 to now.

Maybe you need to copy p96refresh and rtg.library from "*\WinUAE\Amiga Programs"!?!? I don't know if they are changed from when 0.8.8 is released. There is none of them in 0.8.8 installation.

[thomas]

Originally Posted by honx

no, only one file in devs:monitors

Check if Devs:Picasso96Settings exists and if yes, delete it.

[prowler]

Originally Posted by Tomislav

WinUAE 1.4.6 is last version that I know that work on Win9x.

Versions from 0.8.24 onward are available from Toni's website.

For testing purposes and nostalgia, my proposded compilation will include at least the following versions, complete with documentation where applicable, when I have located them on my old hard drives:

0.6.3
0.6.6 pr2
0.6.8 r7
0.6.8 r10
0.6.8 r11
0.6.8 r14 (68000 CPU version)
0.6.8 r14 (68020 CPU version)
0.6.9 r7
0.6.9 r12
0.6.9 r12a
0.6.9 r13 b7
0.6.9 r13 b9
0.6.9h r1
0.7.0b2 r5
0.7.0 r1
0.7.2 r1
0.7.2 r2
0.7.5b r1
0.8.6 r1
0.8.6 r2
0.8.6 r3
0.8.6 r4
0.8.6 r5
0.8.6 r6
0.8.8 r1
0.8.8 r2
0.8.8 r3
0.8.8 r4
0.8.8 r5
0.8.8 r6
0.8.8 r7
0.8.8 r8
0.8.8 r8 Screenshots
0.8.8 r9
0.8.14 r1
0.8.14 r2
0.8.14 r3
0.8.14 r4 b1 AVI
0.8.14 r4 b1 Kaillera b1
0.8.14 r4 b1 Kaillera r1
0.8.15 r0
0.8.15 r1 b2
0.8.15 r1 b3
0.8.16 r1
0.8.16 r2
0.8.16 r2 DE
0.8.16 r3
0.8.16 r4
0.8.16 r4 AVI
0.8.16 r4 CD32
0.8.16 r4 SND
0.8.17 r1
0.8.17 r2
0.8.17 r3
0.8.17 r3 AVI
0.8.17 r3 CD32/CDTV
0.8.21 r1
0.8.21 r2
0.8.21 r2 eXPerience 1
0.8.21 r2 eXPerience 1.1
0.8.21 r2 eXPerience 1.3
0.8.21 r3
0.8.21 r3 fix
0.8.21 r4
0.8.21 r4 SND
0.8.22 r1
0.8.22 r1 P4
0.8.22 r1 XP2 b2 Kaillera
0.8.22 r2
0.8.22 r3
0.8.22 r4
0.8.22 r5
0.8.22 r6
0.8.22 r7
0.8.22 r8
0.8.22 r9
0.8.23
0.8.23 FR

[Tomislav]

0.6.4 is last version that works on 386 machines. 0.6.5 uses bswapl instruction which is 486+ CPU instruction.
I think that 0.8.8 is first that have AGA.