09 March 2008, 04:37 | #1 |
A4000T owner :)
Join Date: Jan 2006
Location: California, USA
Age: 49
Posts: 498
|
Can I use a HD Floppy as DF0 in a AT A4000T??
As you know the Amiga Tech. A4000T comes with a DD floppy as DF0, I was wondering, can anyone tell me whether it is possible to exchange that with a HD floppy ??
I ask because I see that there is a jumper that needs to be set depending on whether DF1 is a HD or DD floppy drive. MODS: I didn't know which forum to post my question in, so if this is the wrong place I'm sorry about that, and of course feel free to move it |
09 March 2008, 13:22 | #2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,863
|
Yes, you can.. If there is an adapter board somewhere along the cable between the floppy board and the drive, that must be removed.
I assume you're talking about an Amiga compatible 150rpm HD floppy drive. |
09 March 2008, 19:04 | #3 |
A4000T owner :)
Join Date: Jan 2006
Location: California, USA
Age: 49
Posts: 498
|
Thanks I am talking about a HD floppy drive removed from an A4000D, thus Amiga compatible (one of those Chinon drives). I'll take a look, but don't recall seeing any adapter boards...
EDIT: I just checked, there are no adapter boards between the floppy drive and the floppy board, does this mean the floppy drive already installed is a HD floppy ?? (I haven't completed assembling the computer yet, thus had no chance to test the drive) Last edited by Kristian95; 09 March 2008 at 19:21. |
09 March 2008, 20:31 | #4 |
Zone Friend
Join Date: Jul 2005
Location: Toronto, Canada
Posts: 734
|
I hooked up I want to call it an AmTrak??? HD drive to my 4000T. I bought it back in the late 90's. Again if my memory isn't failing me, the original drive that was shipped with to 4000T was a sony drive. In order to make the drive work, they needed to cut and splice a number of the wires on the ribbon cable. If you are using the original cable, you need to plug it into the DF1: port. You will only be able to plug in 1 floppy drive with that cable.
I hope it helps. |
09 March 2008, 21:20 | #5 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,863
|
Kristian, if there are no boards in there, it is probably just an Amiga compatible DD drive in there.
|
10 March 2008, 04:12 | #6 |
A4000T owner :)
Join Date: Jan 2006
Location: California, USA
Age: 49
Posts: 498
|
Ok, thanks for the help guys
@source: in case it won't work with the original cable, what would happen to the floppy board and the floppy drive if I tried it out ?? So I check the ribbon cable, if no cutting and splicing is visible I am fine with that cable and my Chinon HD floppy drives ?? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HxC Floppy Emulator for CDTV, cannot get DF0 and DF1 working | CDTV1991 | support.Hardware | 0 | 05 October 2011 14:45 |
floppy df0 working / not working | Dave_wb | support.Hardware | 3 | 07 January 2009 09:11 |
A4000T WB disks and Manual + Boot floppy for OS 3.9 installation | Kristian95 | request.Other | 4 | 27 February 2008 17:37 |
Would High Density Chinon FB-357A Floppy work with A4000T | ancalimon | support.Hardware | 5 | 21 January 2008 11:00 |
a4000t boot floppy? | tin | support.Hardware | 2 | 14 October 2004 20:03 |
|
|