New 4MB PCMCIA SRAM cards - any interest in the community? - Page 4

ShK · 23 September 2014, 20:11

How to use Sakura as Disk? RAM/Disk switch is in disk position and when I run the PrepCard application its just say: "Card is already in use as System RAM". Tested in a vanilla A600.

jimbob · 24 September 2014, 03:09

Assuming it is safe to hotplug these, boot first, then insert card, then prepare as disk.

ShK · 24 September 2014, 03:41

Quote:

Originally Posted by jimbob

Assuming it is safe to hotplug these, boot first, then insert card, then prepare as disk.

I just didn't dare. Yes, it worked! Thanks for your help.

strim · 24 September 2014, 13:34

Quote:

Originally Posted by ShK

I just didn't dare. Yes, it worked! Thanks for your help.

Also, this procedure is laid out in the instruction manual that you should have received with the card

. Alternatively you can download it from here.

strim · 21 October 2014, 09:41

All Sakura cards are sold out now.

HardStep · 22 October 2014, 02:31

New advanced version sounds like a great product and would gain much more interest from people with Fast RAM and accelerators as well. Good luck with development

derSammler · 30 August 2015, 12:34

Are there any plans to produce another batch of those cards? I could need one for my A600.

Or did you really put all that work in a product that was only on sale for a couple of weeks?

strim · 30 August 2015, 16:22

Quote:

Originally Posted by pcGTW_Webmaster

Are there any plans to produce another batch of those cards? I could need one for my A600.

There is a plan for a new, cost reduced version. However, we have a few other products in the pipeline now (A3000/A4000 CPU card, external HDMI scandoubler, and a few other purely research projects). So the new PCMCIA card does not have a high priority at this moment.

Quote:

Or did you really put all that work in a product that was only on sale for a couple of weeks?

It's not exactly like that. The project is open source since the beginning. Anyone can produce this card if they want to:
https://github.com/Sakura-IT/ppa-pcmcia-sram

derSammler · 30 August 2015, 18:41

Quote:

Originally Posted by strim

There is a plan for a new, cost reduced version.

I would be happy with an original one.

scu98rkr · 20 October 2019, 17:32

any news on another order of these ?

Unkown · 27 October 2019, 15:10

Quote:

Originally Posted by DDNI

PCMCIA RAM in an A1200 is a bad idea as it actually slows the system down.

This information is based on ?

demolition · 27 October 2019, 16:53

Quote:

Originally Posted by Unkown

This information is based on ?

The bus in a 1200 is 32 bit wide while PCMCIA memory is only 16 bit. That makes it slower but since it is still recognized as fast mem it has higher priority than chip mem and will be used first.

AmigaCD32CD · 29 March 2020, 18:52

is a new lot going to be prepared 4mb vers? thank you

Rodeo · 06 December 2021, 03:19

just made my own sakura 4mb card, when i switch it to disk in prepcard it shows information about name , sakura 4mb etc. when i put it to RAM it shows only N/A everywhere.
if i prepare the card either RAM or DISK it says wtrite-protected
i know this card is autoconfig in RAM mode soo i dont actualy need to use prepcard for ram. is my S-ram chip fake ? or should i look for a bridge ?
can someone help me ?

i ordered all the stuff around 2017/18 i got 20 kits of it. if i could make it work i could sell cards. they are made with a different pcmcia port. its not perfect. but with something 3D printed frame-keys for the port it will be bullet proof. mu pcmcia port has no keys at all but havent still killed my amiga600 even though i pushed it in wrong pings serveral times. and no i havent killed something. i got a 4mb SRam card working to compare with, works as ram and disk.

Bruce Abbott · 06 December 2021, 06:55

Quote:

Originally Posted by Rodeo

is my S-ram chip fake ?

Where did you get it from?

Rodeo · 06 December 2021, 13:50

Quote:

Originally Posted by Bruce Abbott

Where did you get it from?

actualy the memory is fine. i bought it from mouser becouse the first batch of chips was obvious fake ones.

Rodeo · 06 December 2021, 18:34

What i mean is i remember the fake chips becouse they where totaly wrong in apearence. Soo i went through a chat with my Friend and i could se a picture where i bought 2 s-ram chips from mouser.

What still can be wrong types is the logic chips
I dont know. "We" signal is write enable? That one is high as in 4.8 voltage.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to set up Pretec 4MB PCMCIA SRAM on A600?	onlychipmem	support.Hardware	7	10 March 2012 00:00
PCMCIA SRAM cards as Fast RAM (A600)	Nitrobeast	support.Hardware	12	23 July 2008 19:54
1gb SRAM PCMCIA cards in A600	Magno Boots	support.Hardware	4	06 April 2008 22:08
WTB or Trade: 4mb pcmcia Sram Card	Zetr0	MarketPlace	15	09 May 2007 12:07
A600 and PCMCIA SRAM cards	pvt_beano	support.Hardware	6	20 January 2006 16:35

23 September 2014, 20:11	#61
ShK Registered User Join Date: Mar 2013 Location: Lahti / Finland Age: 52 Posts: 447	How to use Sakura as Disk? RAM/Disk switch is in disk position and when I run the PrepCard application its just say: "Card is already in use as System RAM". Tested in a vanilla A600.

24 September 2014, 03:09	#62
jimbob Registered User Join Date: May 2006 Location: Kilmacolm Age: 45 Posts: 632	Assuming it is safe to hotplug these, boot first, then insert card, then prepare as disk.

21 October 2014, 09:41	#65
strim NetBSD developer Join Date: May 2012 Location: Warsaw, Poland Posts: 411	All Sakura cards are sold out now.

22 October 2014, 02:31	#66
HardStep Registered User Join Date: Dec 2005 Location: Toronto Posts: 184	New advanced version sounds like a great product and would gain much more interest from people with Fast RAM and accelerators as well. Good luck with development

30 August 2015, 12:34	#67
derSammler Senior Member Join Date: Jun 2001 Location: Germany Posts: 1,645	Are there any plans to produce another batch of those cards? I could need one for my A600. Or did you really put all that work in a product that was only on sale for a couple of weeks?

20 October 2019, 17:32	#70
scu98rkr Registered User Join Date: Oct 2012 Location: Twyford Posts: 90	any news on another order of these ?

29 March 2020, 18:52	#73
AmigaCD32CD Registered User Join Date: Dec 2018 Location: London Posts: 41	is a new lot going to be prepared 4mb vers? thank you

06 December 2021, 03:19	#74
Rodeo Banned Join Date: Dec 2017 Location: https://t.me/pump_upp Posts: 25	just made my own sakura 4mb card, when i switch it to disk in prepcard it shows information about name , sakura 4mb etc. when i put it to RAM it shows only N/A everywhere. if i prepare the card either RAM or DISK it says wtrite-protected i know this card is autoconfig in RAM mode soo i dont actualy need to use prepcard for ram. is my S-ram chip fake ? or should i look for a bridge ? can someone help me ? i ordered all the stuff around 2017/18 i got 20 kits of it. if i could make it work i could sell cards. they are made with a different pcmcia port. its not perfect. but with something 3D printed frame-keys for the port it will be bullet proof. mu pcmcia port has no keys at all but havent still killed my amiga600 even though i pushed it in wrong pings serveral times. and no i havent killed something. i got a 4mb SRam card working to compare with, works as ram and disk.

06 December 2021, 18:34	#77
Rodeo Banned Join Date: Dec 2017 Location: https://t.me/pump_upp Posts: 25	What i mean is i remember the fake chips becouse they where totaly wrong in apearence. Soo i went through a chat with my Friend and i could se a picture where i bought 2 s-ram chips from mouser. What still can be wrong types is the logic chips I dont know. "We" signal is write enable? That one is high as in 4.8 voltage.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)