Amiga 500+

@UAE · 18 April 2002, 00:03

Hi
I cant run some games on amiga 500+ with kickstart 2.0 ..

any help

18 April 2002, 00:10

You need a program that loads a kickstart1.3 rom image into memory and makes the machine use it as the bios instead of 2.0.

In short, you need a degrader. I can upload one (relokick) to the zone but you need to write it to an amiga floppy by yourself.

18 April 2002, 00:17

Here you go, you need to transfer this adf file to amiga by using crossdos or another method and write it to a floppy. There are various programs that can do this and I recommend Codetapper's DiskWiz. You can find it here along with other useful tools

If you have questions on how to transfer files, check this page:

http://www.abime.net/eab/showthread....&threadid=3239

After you successfully create the disk, make a backup (

) then boot from it, it will load the 1.3 kickstart image and restart the machine, then you'll see a grey command prompt that says assign failed etc. Just reboot your machine and you're ready

@UAE · 18 April 2002, 00:55

Thank you Burseg

i will work on it now ...

@UAE · 18 April 2002, 13:53

Thanx again .. its worked .. i used Paradise Program .. using Parallel cable ..

:laugh

18 April 2002, 14:07

Glad to hear that

18 April 2002, 00:03	#1
@UAE Registered User Join Date: Apr 2002 Location: Dubai UAE Posts: 163	Amiga 500+ Hi I cant run some games on amiga 500+ with kickstart 2.0 .. any help

18 April 2002, 00:17	#3
oldpx Posts: n/a	Here you go, you need to transfer this adf file to amiga by using crossdos or another method and write it to a floppy. There are various programs that can do this and I recommend Codetapper's DiskWiz. You can find it here along with other useful tools If you have questions on how to transfer files, check this page: http://www.abime.net/eab/showthread....&threadid=3239 After you successfully create the disk, make a backup () then boot from it, it will load the 1.3 kickstart image and restart the machine, then you'll see a grey command prompt that says assign failed etc. Just reboot your machine and you're ready Last edited by Burseg; 18 April 2002 at 00:23.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Plastic Dust Cover for Amiga 500 & Amiga 600	S0nic	MarketPlace	0	14 February 2013 16:41
Adapting an Amiga 2000 accelerator to an Amiga 500	Miked	support.Hardware	15	11 February 2010 14:42
Compatibility with Amiga 500 and 500+ games	ErickDF	Amiga scene	2	23 May 2008 20:16
HELP! Amiga Explorer transfers crashes Amiga 500	Psylicium	support.Apps	3	17 September 2007 12:58
WTB: Amiga 600, 500, 500 +, 1200 (NTSC)	JeremyDay	MarketPlace	2	30 November 2006 03:27

18 April 2002, 00:10	#2
oldpx Posts: n/a	You need a program that loads a kickstart1.3 rom image into memory and makes the machine use it as the bios instead of 2.0. In short, you need a degrader. I can upload one (relokick) to the zone but you need to write it to an amiga floppy by yourself.

18 April 2002, 00:55	#4
@UAE Registered User Join Date: Apr 2002 Location: Dubai UAE Posts: 163	Thank you Burseg i will work on it now ...

18 April 2002, 13:53	#5
@UAE Registered User Join Date: Apr 2002 Location: Dubai UAE Posts: 163	Thanx again .. its worked .. i used Paradise Program .. using Parallel cable .. :laugh

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)