Cybppc A4000 on decent PC runs terribly

dungeonseeker · 12 January 2022, 15:46

Hi, my first post here

I'll start with my specs (not amazing but certainty not bad either)
Ryzen 7 3800X
16GB DDR4 3600
Radeon 5700XT

And I'm emulating
A4000 on KS 40.68
68040, no MMU, FPU CPU internal, JIT

HDF HDD on uaehd.device
Cyberstorm PPC with latest rom
Elbox Mediator
3DFX Voodoo 3
I also have chipset extras to A4000 and CPU speed set to max

I'm running WB3.9 with BB4, I've got Warp3D and WarpOS installed and AFAICT everything is setup correctly. All demos for W3D & WOS run, I've used medconfig to setup the mediator and set required env vars and I've the WOSPrefs tool (from aminet) to configure the graphics memory address the e0000000.

Adoom runs at less than 10FPS on 320x200, it makes no difference if I use the Amiga graphics or the Voodoo.

Amiquake is more like 1FPS.

WO2097 runs at minutes per frame (literally not joking, it takes over 5 minutes to get to the press enter screen) and all the graphics are garbled. Another oddity is WO will only run in windowed mode, if I choose an FS mode then click select mode nothing happens.

What am I missing? I've seen others running WO under WinUAE with playable framerates.

Please help.

coldacid · 12 January 2022, 16:26

First, you'll need to post your config. Your PC beats mine except for RAM and yet I've had no speed problems when I've emulated a PPC A4000. There's likely something funny about your WinUAE configuration causing this.

dungeonseeker · 12 January 2022, 17:10

Quote:

Originally Posted by coldacid

First, you'll need to post your config. Your PC beats mine except for RAM and yet I've had no speed problems when I've emulated a PPC A4000. There's likely something funny about your WinUAE configuration causing this.

I've attached a full suite of logs, it includes winuaebootlog, winauelog and my current config

Edit - actually forgot I added the Toccata, that was so I could install AHI. Didn't help at all.

Mad-Matt · 12 January 2022, 18:32

Don't force e0000000 as that is the wrong address and cause the issues you see. run Showconfig command to see where gfx memory is (probably 40000000) You can set the correct value but you may not have to force it.

12 January 2022, 15:46	#1
dungeonseeker Registered User Join Date: Jan 2022 Location: UK Posts: 2	Cybppc A4000 on decent PC runs terribly Hi, my first post here I'll start with my specs (not amazing but certainty not bad either) Ryzen 7 3800X 16GB DDR4 3600 Radeon 5700XT And I'm emulating A4000 on KS 40.68 68040, no MMU, FPU CPU internal, JIT HDF HDD on uaehd.device Cyberstorm PPC with latest rom Elbox Mediator 3DFX Voodoo 3 I also have chipset extras to A4000 and CPU speed set to max I'm running WB3.9 with BB4, I've got Warp3D and WarpOS installed and AFAICT everything is setup correctly. All demos for W3D & WOS run, I've used medconfig to setup the mediator and set required env vars and I've the WOSPrefs tool (from aminet) to configure the graphics memory address the e0000000. Adoom runs at less than 10FPS on 320x200, it makes no difference if I use the Amiga graphics or the Voodoo. Amiquake is more like 1FPS. WO2097 runs at minutes per frame (literally not joking, it takes over 5 minutes to get to the press enter screen) and all the graphics are garbled. Another oddity is WO will only run in windowed mode, if I choose an FS mode then click select mode nothing happens. What am I missing? I've seen others running WO under WinUAE with playable framerates. Please help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cybppc.device & AmigaOS 4.1 FE , problem	drluking	support.Hardware	23	19 December 2021 20:57
FS-UAE runs too fast	nexusle	support.FS-UAE	19	09 February 2013 12:05
Subtrade - Runs on all Amiga except A4000?	fc.studio	support.Games	2	06 January 2008 01:30
Looking for decent servers in the UK	Sober	project.WinUAE - Kaillera	1	24 April 2007 01:58
Decent debugger?	AmigaBoy	Coders. General	17	24 March 2007 15:12

12 January 2022, 16:26	#2
coldacid WinUAE 4000/40, V4SA Join Date: Apr 2020 Location: East of Oshawa Posts: 538	First, you'll need to post your config. Your PC beats mine except for RAM and yet I've had no speed problems when I've emulated a PPC A4000. There's likely something funny about your WinUAE configuration causing this.

12 January 2022, 18:32	#4
Mad-Matt Longplayer Join Date: Jan 2005 Location: Lincoln / UK Age: 44 Posts: 1,846	Don't force e0000000 as that is the wrong address and cause the issues you see. run Showconfig command to see where gfx memory is (probably 40000000) You can set the correct value but you may not have to force it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)