![]() |
![]() |
#1 |
Registered User
Join Date: Sep 2009
Location: Norway
Posts: 1,721
|
Commodore 1084/1084S RGB connector pinout
Here you go, I made this now.. Great if you want to make an e.g. game console RGB cable or something!
![]() Keep in mind that this picture is illustrating the connector plug you're making, not the plug on the monitor! ![]() If you get blended colors, then you need to buffer the current of the RGB lines. I use 3x 6.3v 100µF capacitors... The - side should go to the pins, and the + side to the wires. For me, the RGB lines measured 2.x to 3.x volt, so I'm safe with 6.3v caps. If you get heavy distortion and/or funky colors, then you presumably forgot to wire up GND/ground... Get your GND from your console/machine video output plug, and solder it to pin 1 on your own nifty plug. Last edited by 8bitbubsy; 25 February 2011 at 17:46. |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2011
Location: Loughborough, United Kingdom
Posts: 16
|
No image showing for me?
|
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2009
Location: Norway
Posts: 1,721
|
Fixed
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PC to 1084 : RGB or S-Video? | Andymiga | support.Hardware | 28 | 14 October 2012 17:05 |
Amiga RGB to Scart pinout | kipper2k | support.Hardware | 2 | 04 April 2011 05:43 |
Problems running RGB SCART on Commodore 1084S Monitor | duddyroar | support.Hardware | 32 | 01 March 2011 19:01 |
A530 power supply connector pinout | SpookyAmiga | support.Hardware | 3 | 09 September 2009 05:17 |
WTB: rgb to 1084 monitor lead | DoogUK | MarketPlace | 6 | 07 February 2009 16:26 |
|
|