27 September 2007, 00:09 | #1 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
Wanted: A2000 scandoubler
Hello!
I am looking for a videoslot scandoubler for my A2000 , if you have one for sale, please PM me. Thanks! |
27 September 2007, 00:22 | #2 |
A-Collector, repairments
|
upgrading your monster tower, eh? good luck
|
27 September 2007, 00:31 | #3 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
no.... short-circuit... sd dead...
|
27 September 2007, 01:19 | #4 |
A-Collector, repairments
|
|
27 September 2007, 07:01 | #5 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
thanks...
btw, I see a ground line on the scandoubler that is burned (actually detached from the pcb!) I wonder if I can fix it... oh, and this whole happenede while moving the A2000 to an original D case |
27 September 2007, 07:05 | #6 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
also I see on BBOAH for the sd on the ebay auction:
"The card is only suitable for 15Khz modes (NTSC, PAL, Euro36) and it can't process ECS/AGA screenmodes. It does however have software controllable refresh rates at up to 100Hz. SuperHighRes modes are possible but every second pixel in a row is omitted." I don't think it would be good for my 2MB ECS A2000 lol |
27 September 2007, 07:56 | #7 |
hastala vista winny vista
|
if it's just the ground line, and no chip fried, that can be easily fixed.
I don't think any scandoubler for the A2000 can process ECS modes. They're supposed to be VGA compatible anyway. But ECS modes suck cause you have to stick with 4 colors for a decent resolution. If you want 16 colors or something, you have to decrease the resolution to the size of a matchbox. Your best bet is a scandoubled/de-interlaced PAL/NTSC mode I guess. Or a RTG card. Why do you have all those Zorro slots anyway ? :-P |
27 September 2007, 08:42 | #8 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
I do have a picassoII on it...
what are you trying to say about the sd? I don't get it I had the macrosystems DeInterlace 2000 , it was working OK as far as I could tell... also does anyone know the R&D FlickerBlaster 2000 videoslot scandoubler???? here is the damage, I cannot see any other problem visually... Last edited by keropi; 27 September 2007 at 08:51. |
27 September 2007, 08:59 | #9 |
hastala vista winny vista
|
ok, let me put it this way, why do you think this scandoubler would not be good for your ECS A2000 ?
|
27 September 2007, 09:08 | #10 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
now I see it better... BBOAH says it cannot process doublescan modes, right? I don't care about them lol
edit: what do you think of the damage? Last edited by keropi; 27 September 2007 at 09:15. |
27 September 2007, 09:24 | #11 |
hastala vista winny vista
|
yes exactly that. ECS modes are already doubled, so it's not necessary to doubled them again.
I think it can be easily patched with a wire. Even a starter can do it with a soldering iron (yes come on, you can do it ). |
27 September 2007, 09:38 | #12 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
you think?
the monitor won't "power-on" from the scandoubler, is it possible that because the wire in on the air it does not work OK? because it is not cut... |
27 September 2007, 09:45 | #13 |
hastala vista winny vista
|
the best way to know is to use a continuity tester and see if it still conducts. Or you can use a voltmeter to see if there's ground on the connector pins.
|
27 September 2007, 10:08 | #14 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
hm... I better get it to a friend of mine that repairs electronics... he is the same that made that cga->vga converter to work with the amiga...
|
27 September 2007, 10:57 | #15 |
Amiga-Mad
|
It died?
Wasn't it working when we had a chat yesterday? man..you have bad luck Try and get a C= A2320 SD/FF, it's the same military spec SD/FF as in the A3000 |
27 September 2007, 11:04 | #16 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
no it did not die alone amigo... I forgot to pull the plug out of the PSU while I was replacing the switch.... lol I killed it
|
27 September 2007, 12:07 | #17 |
A-Collector, repairments
|
pin 5 is really gnd, i hope it will works again if you patch it
|
27 September 2007, 12:25 | #18 |
Amiga-Mad
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: ScanDoubler for A1200 | mfletcher | MarketPlace | 0 | 17 March 2008 17:38 |
Wanted: External Scandoubler | T_hairy_bootson | MarketPlace | 7 | 27 September 2007 12:14 |
Wanted: Arxon / CompServ Scandoubler | keropi | MarketPlace | 5 | 07 January 2007 20:22 |
Wanted: the scandoubler loop cable for a Cybervision64 ... | keropi | MarketPlace | 2 | 29 November 2006 19:38 |
WANTED: scandoubler / Cybervision64 | aix | MarketPlace | 0 | 09 July 2006 13:50 |
|
|