SetPatchMrgCop 2.0 is not installed. (Brilliance 2.0)

FerociousAmiga · 09 July 2021, 04:31

Hello all,

I've copied over Brilliance 2.0 but when I start it the following Warning window appears "SetPatchMrgCop 2.0 is not installed" (see pic) on the bottom of the screen. I can press "Continue" and lets me in. Any idea how I can resolve this?

Thx in advance

My setup:
A500
1mb chip
Classic 520 (020/ 8mb ram)
32GB CF card
Amiga OS 3.2

Matt_H · 09 July 2021, 04:36

Brilliance should add that command to the startup-sequence/user-startup automatically during installation. If it doesn’t, just run it manually before starting Brilliance. I set up an IconX script to do it.

I don’t know what it does other than make that error message go away.

FerociousAmiga · 09 July 2021, 04:38

Thanks. I didn't run the installer, i copied the folder over.

arcanist · 09 July 2021, 17:19

I've no idea if the patch is needed but there's a tooltype to disable the warning. You can uncomment PATCH_TEST (remove the surrounding brackets) and set it to Off.

FerociousAmiga · 09 July 2021, 18:44

Thanks Matt_H & arcanist...

09 July 2021, 04:31	#1
FerociousAmiga Registered User Join Date: Jun 2019 Location: DFW Posts: 98	SetPatchMrgCop 2.0 is not installed. (Brilliance 2.0) Hello all, I've copied over Brilliance 2.0 but when I start it the following Warning window appears "SetPatchMrgCop 2.0 is not installed" (see pic) on the bottom of the screen. I can press "Continue" and lets me in. Any idea how I can resolve this? Thx in advance My setup: A500 1mb chip Classic 520 (020/ 8mb ram) 32GB CF card Amiga OS 3.2 Attached Thumbnails Last edited by FerociousAmiga; 09 July 2021 at 04:37.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brilliance or Brilliance 2	Tarzin	request.Apps	23	17 October 2018 03:45
Brilliance v2.0	jimmy2x2x	request.Apps	2	16 November 2014 18:24
brilliance 2?	poppe	request.Apps	1	22 March 2006 15:24
Brilliance	Kodoichi	request.Apps	1	23 November 2001 00:07
Brilliance 2.0	dulcaoin	support.WinUAE	3	16 October 2001 23:13

09 July 2021, 04:36	#2
Matt_H Registered User Join Date: Jul 2008 Location: Boston, MA Posts: 943	Brilliance should add that command to the startup-sequence/user-startup automatically during installation. If it doesn’t, just run it manually before starting Brilliance. I set up an IconX script to do it. I don’t know what it does other than make that error message go away.

09 July 2021, 04:38	#3
FerociousAmiga Registered User Join Date: Jun 2019 Location: DFW Posts: 98	Thanks. I didn't run the installer, i copied the folder over.

09 July 2021, 17:19	#4
arcanist Registered User Join Date: Dec 2017 Location: Austin, TX Age: 41 Posts: 405	I've no idea if the patch is needed but there's a tooltype to disable the warning. You can uncomment PATCH_TEST (remove the surrounding brackets) and set it to Off.

09 July 2021, 18:44	#5
FerociousAmiga Registered User Join Date: Jun 2019 Location: DFW Posts: 98	Thanks Matt_H & arcanist...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)