![]() |
![]() |
#1 |
Registered User
|
Where to put the grounding cable on indi mk2?
For some reason the newer 1232/40 Indivision mk2 cards do not have an earth hole as the 1232/33 cards have. The manual says the yellow earth cable can be connected to the right corner of the mk2. (In the attached picture the mk2 above is an older 1232/33 version (I guess), and the one below is mine.
But I have no clue where to attach it. It cannot go to the left screw opening because the yellow cable provided is not long enough. Besides I want to reserve this hole for a fan. Does anyone know where "V6" stands for (on the right corner of the card)? Additional question about a fan on the mk2? What is the best solution in providing power for this fan? I read some people split the floppy cable but in some cases this could fry some motherboard chips. I don't like the idea of that. Any suggestions on this would be welcome. |
![]() |
![]() |
#2 |
Precious & fragile things
Join Date: Feb 2009
Location: Victoria, Australia
Posts: 1,946
|
I don't have an A1200 main board here but I would personally put a spade lug in the ground hole below the crystal and clip one end off the ground cable and crimp an angled female spade connection on that.
V6 will be a test point for some verification of the card, a signal of some sort I would think. http://www.amibay.com/showthread.php?t=29035&page=8 |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
to the left of the card is a large hole,its ground.
|
![]() |
![]() |
#4 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,925
|
The ground cable is not really needed, perhaps put it back in the sales box? :-)
|
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,061
|
If you decide that you need to connect the ground cable, please make sure you do not short any capacitors with the metal loop on the end of the cable.
|
![]() |
![]() |
#6 |
Professional slacker!
|
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
A1200 2B mb. Timing Fix, Indi MKII and others. | Retrofan | support.Hardware | 33 | 20 March 2019 15:53 |
Indi ECS can't stretch image vertically? | BarryB | support.Hardware | 4 | 15 December 2013 00:12 |
My A1200 with ACA1232/33 & Indi AGA MkII | fitzsteve | Hardware pics | 10 | 12 May 2013 12:43 |
my '1 inch drop technique' (indi ecs) | lost_lemming | support.Hardware | 5 | 27 February 2010 19:29 |
WTD: Amiga to CM8833 MK2 monitor cable | ElectroBlaster | MarketPlace | 0 | 24 September 2006 20:02 |
|
|