12 August 2021, 06:47 | #1 |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Amiga 2000 EATX Released
I am proud to announce the first production release of the Amiga 2000 EATX PCB. This is something I have been working on for several months. This is an Amiga 2000 in the EATX form factor. It is an open source project and available on Github.
Based on the Amiga 2000 Rev 6.2, although some modifications were made from the original. All the info is on Github. Enjoy! https://github.com/jasonsbeer/Amiga-2000-ATX |
12 August 2021, 07:41 | #2 |
Registered User
Join Date: Mar 2019
Location: Melbourne, Australia
Posts: 420
|
Nice! You're up and running with one, how is it? What's different apart from the form factor?
Eh, ignore that question, I'm reading the GitHub. Congratulations! |
12 August 2021, 11:25 | #3 |
Registered User
Join Date: Nov 2014
Location: NSW/Australia
Posts: 462
|
wow - that's really great
I'll miss not having a Varta near the CPU though |
12 August 2021, 14:48 | #4 |
Tech Guru
Join Date: Dec 2015
Location: Oxnard, CA
Posts: 189
|
Very nice work! I look forward to putting one together. Its a very clean layout and should be a lot of fun to make!
|
12 August 2021, 15:46 | #5 |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Rock solid as far as I can test it. Passes memory tests with flying colors, AIBB doesn't break it. Ran it for hours on end without issue.
I have tested it with an A2630, Supra WordSync SCSI, and my own version of the Pi -> HDMI card. You can see that setup in the Lemmings picture on the main Github repo page. |
13 August 2021, 14:41 | #6 |
Registered User
Join Date: Mar 2018
Location: Brisbane/Australia
Posts: 72
|
Very nice - how many hardware iterations did you end up going through? Was it more or less than the listed revisions on your github?
|
13 August 2021, 17:14 | #7 |
Ex nihilo nihil
Join Date: Oct 2017
Location: CH
Posts: 4,856
|
Wow !!! Thanks for making this a real thing
Would love to buy a mounted and functional one... |
14 August 2021, 02:25 | #8 |
French in Australia
|
Nice project! 2MB chip mem version, right?
|
14 August 2021, 06:22 | #9 |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
|
14 August 2021, 06:32 | #10 |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Unfortunately, no. It was a conscious decision to stick with the 8372A, which is comparatively common and works in both NTSC and PAL systems.
8375's are mostly non-existent in NTSC land. I have intentions of making another revision that supports the A600 version of the 8375...but I need someone with an 8375 who is willing to build the board and test. Should be easy enough. I think the RAM circuit will work as-is, with new routing from 8375. I'll need to do more homework to know for sure. If one of the Agnus replacements comes to light...that would be a game changer. |
14 August 2021, 06:47 | #11 |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
There is some discussion on the Issues tab of the github page about ordering these boards with most (or all?) the SMD components mounted. Depending on where everyone is located, there may be an opportunity to share in an order.
|
14 August 2021, 17:00 | #12 |
Registered User
Join Date: Jul 2002
Location: Sweden
Posts: 762
|
Very nice! Good work.
|
14 August 2021, 20:24 | #13 |
Derezzed User
Join Date: Feb 2018
Location: Tallahassee / USA
Posts: 38
|
This is awesome. I would love to pick up a completed board.
|
15 August 2021, 10:02 | #14 |
Registered User
Join Date: Aug 2014
Location: Zagreb / Croatia
Posts: 302
|
What about MegAChip 2MB? MegAChip can go on A500 and A2000...
|
15 August 2021, 10:20 | #15 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,337
|
Congratulations. This is a very good project.
One question... like the A2000 there doesn't appear (to me) to be a video slot inline with a Zorro II slot? Does that means RTG cards with integrated scan-doublers, like the Picasso IV, still have to be "snapped in half" to fit? I am sure this was a conscious decision (like not supporting 8375 2MB Agnus) but I'm curious to know your thinking. I am sure this board would work with a MegAChip if it physically fits. |
16 August 2021, 01:46 | #16 | |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Quote:
|
|
17 August 2021, 02:00 | #17 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,902
|
On the other hand if someone has the idea to put a Video Toaster or one of the larger Video Slot boards in the machine it might prevent the use of the Zorro slot. It's fine as it is I think. Though it would be nice if you could squeeze another ISA slot in.
Someone find a nice ATX desktop case, also make an A2600 sticker to go on it. This one looks alright, only one 5.25" bay so maybe CDTV-III would be a better sticker. https://www.newegg.com/silverstone-g...quicklink=true Or maybe this one for two 5.25" bays one could be used as an 3 1/2" bay. https://www.amazon.com/SilverStone-T.../dp/B007X8TQYI Last edited by grelbfarlk; 17 August 2021 at 03:36. |
17 August 2021, 06:58 | #18 | |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Quote:
That second case was mentioned in a thread I started on the github page... https://github.com/jasonsbeer/Amiga-.../discussions/4 |
|
17 August 2021, 12:21 | #19 | |
Registered User
Join Date: Aug 2012
Location: Johannesburg, South Africa
Age: 49
Posts: 53
|
Quote:
That would be amazing! I'd be happy to be the tester for you. I have non-working A600 and A2000 donor boards that'd be perfect for this project. I also have a 286 bridgeboard to test the ISA slots. If possible, in a future revision, having a fourth ISA slot will make a huge difference as it allows a VGA card, multi IO card and soundcard to be installed (with the bridgeboard taking up the fourth slot) Thanks for making this project possible. |
|
20 August 2021, 04:52 | #20 |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Cool. Keep an eye on the github page. No guarantees, but I'll try to pull the 8375 revision together over the next two weeks, or so.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Card TF534 40mhz for Amiga 500 Amiga 2000 | kulamario | MarketPlace | 0 | 26 July 2021 00:40 |
Amiga 2000 keyboard accepts Amiga 500 key/spring/plungers? | rjd324 | support.Hardware | 1 | 30 May 2020 14:10 |
Amiga 4000/4000T Keyboard to an Amiga 2000 | antiriad76 | support.Hardware | 2 | 06 November 2017 21:24 |
amiga a2091 and gvp tekmagic - boot order issue amiga 2000 | MoreBITS | support.Hardware | 6 | 05 December 2011 20:26 |
GameBase Amiga v1.3 released, now with over 2000 games configured! | eLowar | News | 4 | 14 October 2006 06:08 |
|
|