CU Amiga - Midi Interface

Louk · 28 March 2007, 18:35

Hi all,

CU Amiga printed a schematic for how to build a midi interface for your amiga, I do believe this was around 1992/1993. If anyone has this, as an avid keyboard player and electronics fan, I would love to have a go at recreating it.

Does anyone else know what I mean?

Louk

DDNI · 28 March 2007, 18:59

I uploaded the scans once hold on while I look for it.

Heres the Old thread.
http://eab.abime.net/showthread.php?...ght=project+xg

Looks like I forgot to give Zetro the software.... sorry

I will look for it again...

DDNI · 28 March 2007, 19:07

Uploaded my scans to the zone. Also look here on the AMR

http://amr.abime.net/issue_655_pages

Louk · 28 March 2007, 19:30

ahhh wicked thanks man

Though the one I was looking for was a midi interface

If I recall it was on a 20x20 strip of vero board from a much earlier issue, I did use it as the backbone of my GCSE electronics project but thats going back years now.

Louk

Louk · 28 March 2007, 19:59

Searched through it and I can't find it but it is defintiely one of the workshop pages around this era

Between 1993-1994

http://amr.abime.net/amr_popup_pictu...47.jpg&c=24592

Louk

Galaxy · 28 March 2007, 22:57

The article is in the Aug 1993 issue.

I'll scan the article for you today and add it to AMR so check back later.

Louk · 28 March 2007, 23:25

ahhh thank you for that man much appreciated

Galaxy · 29 March 2007, 14:12

The article is now online: http://amr.abime.net/issue_606_pages (pages 172-173)

Zetr0 · 29 March 2007, 15:42

Hey guys, I am going to build that thing this weekend, and yes imma taking pickies too

However i need the software that came with this magazine, or something similar any ideas...

ppill · 29 March 2007, 16:06

My twin brother was into MIDI big time (Korg X5 and later Yamaha CS1x + A1200). Here's a list of programs he used:

MidiTracker (his favorite)
Comouflage
Bars'n'Pipes

Check aminet's mus/midi section.

Too bad the interface doesn't implement THROUGH together with IN and OUT.

Galaxy · 29 March 2007, 22:48

Quote:

Originally Posted by Zetr0

Hey guys, I am going to build that thing this weekend, and yes imma taking pickies too

However i need the software that came with this magazine, or something similar any ideas...

The coverdisks are online, or does the article reference a code listing from the mag (haven't the time to check at the moment)

Louk · 30 March 2007, 01:20

Thank you for that mate much appreciated

I will have a go at rebuilding it.

Louk

alexh · 30 March 2007, 15:33

Surely CU_AMIGA needs one of THESE

Zetr0 · 30 March 2007, 17:47

If only i had a zorro base miggy when i bought my prelude!......

instead i have the clockport version... darn...

Amiga1992 · 03 June 2010, 18:56

OK I read this article, but it doesn't explain HOW to connect these components!
!
Anyone can help?

midnitoker · 20 July 2010, 21:45

Hi, guys, just signed up here and noticed this thread.

Aminet was always a good place - have a look at these:

TriplePlay 2 MIDI-Interface for Bars&Pipes
http://aminet.net/docs/hard/TriplePlay2.lha

A SAVE TriplePlay MIDI-Interface for Bars&Pipes
http://aminet.net/docs/hard/TP3.1.lha

Make a MIDI interface for $20 USD.(DIY)
http://aminet.net/docs/hard/SwG-MboX.lha

And to download the latest BarsNpipes sequencer
http://www.hansfaust.de/barsnpipes/download.html#BPNew

Good luck. ;-)

28 March 2007, 18:35	#1
Louk Registered User Join Date: Mar 2007 Location: Plymouth Posts: 128	CU Amiga - Midi Interface Hi all, CU Amiga printed a schematic for how to build a midi interface for your amiga, I do believe this was around 1992/1993. If anyone has this, as an avid keyboard player and electronics fan, I would love to have a go at recreating it. Does anyone else know what I mean? Louk

28 March 2007, 18:59	#2
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,433	I uploaded the scans once hold on while I look for it. Heres the Old thread. http://eab.abime.net/showthread.php?...ght=project+xg Looks like I forgot to give Zetro the software.... sorry I will look for it again... Last edited by DDNI; 28 March 2007 at 19:09.

28 March 2007, 22:57	#6
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	The article is in the Aug 1993 issue. I'll scan the article for you today and add it to AMR so check back later. Last edited by Galaxy; 29 March 2007 at 14:12.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga MIDI interface	tinofsild	New to Emulation or Amiga scene	9	14 March 2012 10:23
URGENTLY NEEDED: Amiga MIDI interface	Amiga1992	MarketPlace	4	03 June 2010 19:03
wanted: midi interface for A500 (midi out)	lost_lemming	MarketPlace	1	19 February 2010 14:24
Amiga midi interface	G.Longsword	support.Hardware	1	18 October 2009 13:42
Amiga 1200 Midi Interface Wanted	ianzete	MarketPlace	0	22 July 2004 17:00

28 March 2007, 19:07	#3
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,433	Uploaded my scans to the zone. Also look here on the AMR http://amr.abime.net/issue_655_pages

28 March 2007, 19:30	#4
Louk Registered User Join Date: Mar 2007 Location: Plymouth Posts: 128	ahhh wicked thanks man Though the one I was looking for was a midi interface If I recall it was on a 20x20 strip of vero board from a much earlier issue, I did use it as the backbone of my GCSE electronics project but thats going back years now. Louk

28 March 2007, 19:59	#5
Louk Registered User Join Date: Mar 2007 Location: Plymouth Posts: 128	Searched through it and I can't find it but it is defintiely one of the workshop pages around this era Between 1993-1994 http://amr.abime.net/amr_popup_pictu...47.jpg&c=24592 Louk

28 March 2007, 23:25	#7
Louk Registered User Join Date: Mar 2007 Location: Plymouth Posts: 128	ahhh thank you for that man much appreciated

29 March 2007, 14:12	#8
Galaxy Registered User Join Date: May 2004 Location: Canberra, Australia Age: 46 Posts: 1,417	The article is now online: http://amr.abime.net/issue_606_pages (pages 172-173)

29 March 2007, 15:42	#9
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	Hey guys, I am going to build that thing this weekend, and yes imma taking pickies too However i need the software that came with this magazine, or something similar any ideas...

29 March 2007, 16:06	#10
ppill CON: artist Join Date: Feb 2006 Location: Poland Age: 43 Posts: 1,250	My twin brother was into MIDI big time (Korg X5 and later Yamaha CS1x + A1200). Here's a list of programs he used: MidiTracker (his favorite) Comouflage Bars'n'Pipes Check aminet's mus/midi section. Too bad the interface doesn't implement THROUGH together with IN and OUT.

30 March 2007, 01:20	#12
Louk Registered User Join Date: Mar 2007 Location: Plymouth Posts: 128	Thank you for that mate much appreciated I will have a go at rebuilding it. Louk

30 March 2007, 15:33	#13
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,470	Surely CU_AMIGA needs one of THESE

30 March 2007, 17:47	#14
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	If only i had a zorro base miggy when i bought my prelude!...... instead i have the clockport version... darn...

03 June 2010, 18:56	#15
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,658	OK I read this article, but it doesn't explain HOW to connect these components! ! Anyone can help?

20 July 2010, 21:45	#16
midnitoker Registered User Join Date: Jul 2010 Location: London, UK Posts: 14	Hi, guys, just signed up here and noticed this thread. Aminet was always a good place - have a look at these: TriplePlay 2 MIDI-Interface for Bars&Pipes http://aminet.net/docs/hard/TriplePlay2.lha A SAVE TriplePlay MIDI-Interface for Bars&Pipes http://aminet.net/docs/hard/TP3.1.lha Make a MIDI interface for $20 USD.(DIY) http://aminet.net/docs/hard/SwG-MboX.lha And to download the latest BarsNpipes sequencer http://www.hansfaust.de/barsnpipes/download.html#BPNew Good luck. ;-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)