Has anyone tried adding internal speakers to their Amiga? - Page 2

DanC · 13 July 2021, 19:32

I think i will try these little speakers:
https://www.electrokit.com/en/produc...jst-connector/

They seem to be a good match to the little 3w amp mentioned earlier:
https://www.electrokit.com/en/produc...digital-3w-5v/[/QUOTE]

At last i have ordered these parts above for trying this out!
The power to the 3w amp i assume is best taken from the floppy 5v connector, but what is the best point on the A500 motherboard to feed the audio signals to the amp?

Retro1234 · 13 July 2021, 19:37

Some did it here iirc there were more pictures
https://eab.abime.net/showthread.php?t=56875

DanC · 01 August 2021, 17:57

At last i have put this together, just temporary, but i like the sound!
No lows to talk about, but the heights/middle tones are decent, and its nice to have stereo!
The little amp is really TINY

astuermer · 29 October 2021, 16:48

Quote:

Originally Posted by DanC

At last i have put this together, just temporary, but i like the sound!
No lows to talk about, but the heights/middle tones are decent, and its nice to have stereo!
The little amp is really TINY

Looks pretty cool!
I am too looking for a solution for internal speakers for my A600…
How did you connect the parts?

nogginthenog · 29 October 2021, 18:24

A big box Amiga could use something like this. Shame it's black!

https://www.ebay.co.uk/itm/174630796452

DanC · 02 November 2021, 19:41

Quote:

Originally Posted by astuermer

Looks pretty cool!
I am too looking for a solution for internal speakers for my A600…
How did you connect the parts?

It was really simple, just right/left speaker and +5v from the floppy connector,
and audio in right/left from the Amiga audio out.

here is a picture, hope you get it!

astuermer · 06 November 2021, 21:18

Thanks!
I am planning a mono-only speaker inside of my A600... not much space because of SDIDE, Furia and Gotek...
Did you connect the speaker cables from the inside or a chinch-connector from the outside?

DanC · 09 November 2021, 18:50

Quote:

Originally Posted by astuermer

Thanks!
I am planning a mono-only speaker inside of my A600... not much space because of SDIDE, Furia and Gotek...
Did you connect the speaker cables from the inside or a chinch-connector from the outside?

The AUDIO in i connected just temporarily from the AMIGA chinch connectors from the outside of my A500. The Speakers cables are connected to the amplifier board as of the picture i posted.
I'm planning to connect the audio in to the amp from a suitable point inside of the A500's motherboard.

01 August 2021, 17:57	#23
DanC Registered User Join Date: Jul 2020 Location: Växjö / Sweden Posts: 58	At last i have put this together, just temporary, but i like the sound! No lows to talk about, but the heights/middle tones are decent, and its nice to have stereo! The little amp is really TINY Attached Thumbnails Last edited by DanC; 09 August 2021 at 20:17.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding 2nd A2000 internal floppy drive	Chuckles	support.Hardware	16	09 June 2018 20:53
Adding an internal CD/DVD drive to an A1200	Ox.	Amiga scene	8	15 September 2015 12:36
Computer speakers from Amiga era...	Paul_s	Nostalgia & memories	10	18 November 2009 09:02
pc speakers for Amiga?	Angus	support.Hardware	12	24 September 2009 20:05
Adding a second internal floppy to an A2000	mfletcher	support.Hardware	1	18 July 2008 00:15

13 July 2021, 19:32	#21
DanC Registered User Join Date: Jul 2020 Location: Växjö / Sweden Posts: 58	I think i will try these little speakers: https://www.electrokit.com/en/produc...jst-connector/ They seem to be a good match to the little 3w amp mentioned earlier: https://www.electrokit.com/en/produc...digital-3w-5v/[/QUOTE] At last i have ordered these parts above for trying this out! The power to the 3w amp i assume is best taken from the floppy 5v connector, but what is the best point on the A500 motherboard to feed the audio signals to the amp?

13 July 2021, 19:37	#22
Retro1234 Phone Homer Join Date: Jun 2006 Location: 5150 Posts: 5,773	Some did it here iirc there were more pictures https://eab.abime.net/showthread.php?t=56875

29 October 2021, 18:24	#25
nogginthenog Amigan Join Date: Feb 2012 Location: London Posts: 1,311	A big box Amiga could use something like this. Shame it's black! https://www.ebay.co.uk/itm/174630796452

06 November 2021, 21:18	#27
astuermer Registered User Join Date: May 2005 Location: Austria Age: 45 Posts: 117	Thanks! I am planning a mono-only speaker inside of my A600... not much space because of SDIDE, Furia and Gotek... Did you connect the speaker cables from the inside or a chinch-connector from the outside?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)