your favourite GOTEK internal 3D printable harness?

Bren McGuire · 02 August 2023, 15:40

i think it is time i finally take the plunge and put a GOTEK in my A1200 so i come to ask which is your favourite 3D printable harness to install one inside the machine?
I would like to have one that can host the display somewhere accessible too

lesta_smsc · 02 August 2023, 16:10

To be honest, if going down this route then look at GoDrive. Far superior and all comes for plug and play including the 3D printed accessories:

http://digitalretrobay.co.uk/hello-world/

Bren McGuire · 02 August 2023, 16:14

i appreciate this kind of work but there is no way i am about to plonk 80 quid on a gotek i can have for a fraction and a harness i can print for very little please dont stray from the topic i asked for 3d printable harnesses not for gotek alternatives or premade solutions i want to print my own harness

Quote:

Originally Posted by lesta_smsc

To be honest, if going down this route then look at GoDrive. Far superior and all comes for plug and play including the 3D printed accessories:

http://digitalretrobay.co.uk/hello-world/

lesta_smsc · 02 August 2023, 16:17

Sometimes people aren't aware of alternatives hence suggestion but anyways, good luck with finding what suits your needs. Some of the people I know prefer this set:

LED display holder:
https://www.thingiverse.com/thing:3770877

And this for the drive itself:

https://www.thingiverse.com/thing:3043224

What's nice about that is it lets you control the buttons from the floppy drive port which otherwise would just be an open hole.

indigolemon · 02 August 2023, 16:21

I have no favourite, but I'd start here if I needed one: https://www.thingiverse.com/search?q...&sort=relevant

02 August 2023, 15:40	#1
Bren McGuire Registered User Join Date: Nov 2019 Location: Croydon Posts: 594	your favourite GOTEK internal 3D printable harness? i think it is time i finally take the plunge and put a GOTEK in my A1200 so i come to ask which is your favourite 3D printable harness to install one inside the machine? I would like to have one that can host the display somewhere accessible too

02 August 2023, 16:17	#4
lesta_smsc Registered User Join Date: Feb 2012 Location: United Kingdom Posts: 3,184	Sometimes people aren't aware of alternatives hence suggestion but anyways, good luck with finding what suits your needs. Some of the people I know prefer this set: LED display holder: https://www.thingiverse.com/thing:3770877 And this for the drive itself: https://www.thingiverse.com/thing:3043224 What's nice about that is it lets you control the buttons from the floppy drive port which otherwise would just be an open hole. Last edited by lesta_smsc; 02 August 2023 at 16:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga PSU Cases (3d-printable)	jbilander	Hardware mods	1	12 October 2019 03:01
Gotek internal A500 mount	jbilander	Hardware mods	2	10 October 2019 09:18
Gotek/internal/external drive combination	sozzled	support.Hardware	2	09 December 2018 00:41
3D printable A500 Raspberry Pi case	ali-b	Amiga scene	9	11 March 2015 14:12
Need ideas for a 3D printable case	Stedy	support.Hardware	0	20 January 2014 00:54

02 August 2023, 16:10	#2
lesta_smsc Registered User Join Date: Feb 2012 Location: United Kingdom Posts: 3,184	To be honest, if going down this route then look at GoDrive. Far superior and all comes for plug and play including the 3D printed accessories: http://digitalretrobay.co.uk/hello-world/

02 August 2023, 16:21	#5
indigolemon Bit Copying Bard Join Date: Jan 2017 Location: Kelty, Fife, Scotland Age: 41 Posts: 1,293	I have no favourite, but I'd start here if I needed one: https://www.thingiverse.com/search?q...&sort=relevant

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)