A1200 doesn't boot anymore

opossumita · 20 April 2016, 23:07

Hi all I'm quite a noob concerning AMIGA, anyway over a year ago i managed to configure a CF card to work with WHDLOAD on my real expanded 1200. This evening i tried to install XBENCH launcher and it didn't work... Anyway after i rebooted the system I had this error:

amiga ROM bla bla bla
C:ASSIGN: Unknown command
C:Assign failed returncode 10
1>

Amiga can't boot anymore...
Is there way to fix this?
Thanks in advance

A.

Daedalus · 21 April 2016, 00:39

It's probably not a hardware problem anyway, though there's a chance the CF card has become corrupted. It's more likely that the boot partition or startup sequence has been somehow messed up. Assign is a standard command and should be in the SYS:C/ directory along with many other standard commands. Type the following commands and see what the prompt says after each one:

Prompt

SYS:

C:

20 April 2016, 23:07	#1
opossumita Registered User Join Date: Nov 2014 Location: Italy Posts: 33	A1200 doesn't boot anymore Hi all I'm quite a noob concerning AMIGA, anyway over a year ago i managed to configure a CF card to work with WHDLOAD on my real expanded 1200. This evening i tried to install XBENCH launcher and it didn't work... Anyway after i rebooted the system I had this error: amiga ROM bla bla bla C:ASSIGN: Unknown command C:Assign failed returncode 10 1> Amiga can't boot anymore... Is there way to fix this? Thanks in advance A. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mounting of real hard disk doesn't work anymore	mikro	support.WinUAE	6	13 May 2012 18:44
Rom 1.2 doesn't work anymore	hitchhikr	support.WinUAE	4	24 April 2010 15:05
My A1200 HD doesn't boot	frikilokooo	support.Hardware	2	11 April 2009 03:21
Loom CD doesn't work anymore with scummvm 0.9.0?	hexaae	support.Games	1	03 August 2006 18:51
PinballFantasies CD32 (HD) doesn't work anymore with R6	Leo42	support.WinUAE	0	02 May 2003 03:20

21 April 2016, 00:39	#2
Daedalus Registered User Join Date: Jun 2009 Location: Dublin, then Glasgow Posts: 6,369	It's probably not a hardware problem anyway, though there's a chance the CF card has become corrupted. It's more likely that the boot partition or startup sequence has been somehow messed up. Assign is a standard command and should be in the SYS:C/ directory along with many other standard commands. Type the following commands and see what the prompt says after each one: Prompt SYS: C:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)