TEKNO AMIGA application disk

Lumby · 20 January 2007, 19:06

Hi all

I just got the packed from a friend, but he has lost to application disk.
So if any of you have a copy and will upload it to the Zone I will be very gratefully.

I found a picture on the net of the packed so you can get a idée of what its about

Best regard to you all

keropi · 20 January 2007, 19:20

what is this for????
sorry obviously I can't help with the disk...

Lumby · 20 January 2007, 21:54

Hi

It's an electronics experimentation kit. It has been used as a relay controller etc.

s2325 · 20 January 2007, 22:02

You can build flux capacitor.

thor · 20 January 2007, 22:22

The developer has still some pages about Tekno Amiga: http://www.catus.se/skolprod/laromed...a/TAMeny1.html. It seems you can get the disks with the fourth link there. You have to enter some code. At least that's what I understand, I used Swedish to English translation at: http://www.systransoft.com/index.html

Edit: just tried to enter something as code, seems they have the database for it not working anymore. Maybe emailing them helps.

Lumby · 21 January 2007, 09:37

Hi

Quote:

Originally Posted by thor

The developer has still some pages about Tekno Amiga: http://www.catus.se/skolprod/laromed...a/TAMeny1.html. It seems you can get the disks with the fourth link there. You have to enter some code. At least that's what I understand, I used Swedish to English translation at: http://www.systransoft.com/index.html

Edit: just tried to enter something as code, seems they have the database for it not working anymore. Maybe emailing them helps.

Great link
It's seems like I can get a copy of the disk from there Ill will try this today.

Best regards
Lumby

e5frog · 04 October 2010, 18:21

How did it go?

I thought I should make adf:s out of my three disks, I just picked up a Tekno Amiga this weekend.

e5frog · 03 October 2013, 20:47

As I sold the one I picked up a few years ago I documented it with photos and measurement and finally built one myself, it had a photo copy of the manual that I kept as well. Disks were archived, disk labels scanned.
If anyone wants the board files and schematic for EagleCAD, let me know.

Here's the result, I was planning to use a breadboard for experiment area, the original has coil springs on a plastic board with drilled holes. Haven't decided on a DIL connector or a one row pin header.

Breadboard:

My Tekno Amiga board:

Couldn't find the kind of connector that's meant to be connected to a machine so I had to remove the screws and put ordinary ones there to hold the metal piece.
Double SIL resistors because I couldn't find any 22k at my supplier so I connected two 47k in parallel, measures 23k3 so that's OK.

The original board is one sided without solder mask (green paint), I decided to add a ground plane on both sides and instead of a jumper I utilized the double sides.

Catus seems to work with cakes now-a-days, the ones with photos printed on them.

Helder · 11 September 2023, 16:24

I really would like to try and build this interface.
Can you send me the board files and schematic?
Also I can't seem to find the adf fikes.

Thanks.
Helder (Portugal)

-=ARA=- · 15 September 2023, 11:15

Hi.
Just stumbled across this thread.
If anyone still is interested in the 3 Disks of TeknoAmiga in adf format,
I have them.

TCD · 15 September 2023, 11:24

Quote:

Originally Posted by -=ARA=-

Hi.
Just stumbled across this thread.
If anyone still is interested in the 3 Disks of TeknoAmiga in adf format,
I have them.

Would be great to have them and add them to the file server

-=ARA=- · 17 September 2023, 20:44

Uploaded them to "the Zone".
Note that they are in Swedish language.
But I think they should be straight forward for non Swedish speaker as as well.

TCD · 18 September 2023, 07:29

Thank you very much

I've also added the disks to the file server.

20 January 2007, 19:06	#1
Lumby Zone Friend Join Date: Jun 2006 Location: Sakskøbing / Denmark Age: 50 Posts: 20	TEKNO AMIGA application disk Hi all I just got the packed from a friend, but he has lost to application disk. So if any of you have a copy and will upload it to the Zone I will be very gratefully. I found a picture on the net of the packed so you can get a idée of what its about Best regard to you all

20 January 2007, 22:22	#5
thor Registered User Join Date: Mar 2006 Location: Germany Posts: 899	The developer has still some pages about Tekno Amiga: http://www.catus.se/skolprod/laromed...a/TAMeny1.html. It seems you can get the disks with the fourth link there. You have to enter some code. At least that's what I understand, I used Swedish to English translation at: http://www.systransoft.com/index.html Edit: just tried to enter something as code, seems they have the database for it not working anymore. Maybe emailing them helps. Last edited by thor; 20 January 2007 at 22:29.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question regarding ADF to Amiga Floppy using DMS application	Kenan	support.Hardware	25	09 May 2013 10:35
How to copy an application to an emulated disk.	Morbane	support.Amiga Forever	0	29 December 2011 08:25
I'm looking for an application	Narf the Mouse	request.Apps	33	27 May 2011 20:05
Amiga Application museum	onkelarie	News	42	21 December 2009 08:25
Italian Demo: Tekno Merda (megarare)	andreas	request.Demos	22	10 June 2005 22:23

20 January 2007, 19:20	#2
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	what is this for???? sorry obviously I can't help with the disk...

20 January 2007, 21:54	#3
Lumby Zone Friend Join Date: Jun 2006 Location: Sakskøbing / Denmark Age: 50 Posts: 20	Hi It's an electronics experimentation kit. It has been used as a relay controller etc.

20 January 2007, 22:02	#4
s2325 Zone Friend Join Date: Jun 2006 Location: Gargore Age: 43 Posts: 17,789	You can build flux capacitor.

04 October 2010, 18:21	#7
e5frog The Headstrong Join Date: May 2010 Location: Älvängen / Sweden Age: 49 Posts: 273	How did it go? I thought I should make adf:s out of my three disks, I just picked up a Tekno Amiga this weekend.

03 October 2013, 20:47	#8
e5frog The Headstrong Join Date: May 2010 Location: Älvängen / Sweden Age: 49 Posts: 273	As I sold the one I picked up a few years ago I documented it with photos and measurement and finally built one myself, it had a photo copy of the manual that I kept as well. Disks were archived, disk labels scanned. If anyone wants the board files and schematic for EagleCAD, let me know. Here's the result, I was planning to use a breadboard for experiment area, the original has coil springs on a plastic board with drilled holes. Haven't decided on a DIL connector or a one row pin header. Breadboard: My Tekno Amiga board: Couldn't find the kind of connector that's meant to be connected to a machine so I had to remove the screws and put ordinary ones there to hold the metal piece. Double SIL resistors because I couldn't find any 22k at my supplier so I connected two 47k in parallel, measures 23k3 so that's OK. The original board is one sided without solder mask (green paint), I decided to add a ground plane on both sides and instead of a jumper I utilized the double sides. Catus seems to work with cakes now-a-days, the ones with photos printed on them.

11 September 2023, 16:24	#9
Helder Registered User Join Date: Jul 2022 Location: V. N. Gaia Posts: 1	I really would like to try and build this interface. Can you send me the board files and schematic? Also I can't seem to find the adf fikes. Thanks. Helder (Portugal)

15 September 2023, 11:15	#10
-=ARA=- Registered User Join Date: Sep 2009 Location: Sweden Age: 42 Posts: 53	Hi. Just stumbled across this thread. If anyone still is interested in the 3 Disks of TeknoAmiga in adf format, I have them.

17 September 2023, 20:44	#12
-=ARA=- Registered User Join Date: Sep 2009 Location: Sweden Age: 42 Posts: 53	Uploaded them to "the Zone". Note that they are in Swedish language. But I think they should be straight forward for non Swedish speaker as as well.

18 September 2023, 07:29	#13
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,607	Thank you very much I've also added the disks to the file server.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)