English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 04 February 2008, 14:25   #1
mmikko
 
Posts: n/a
How to test serial port?

How could I test the serial port of my Amiga 3000?
 
Old 04 February 2008, 14:28   #2
Jope
-
Jope's Avatar
 
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 40
Posts: 8,492
You can make a loopback adapter, connect rx to tx and start up a terminal program.

Type in some stuff and you should have everything echoed back to you.

Another option is to get a null modem cable, connect that between the amiga and another computer with rs232. Start terminal programs on both sides, set the port parameters the same way on both ends and start hitting the keys on both sides.

Yet another option is to plug in a modem, start up a terminal program and start hitting letters.
Jope is offline  
Old 05 February 2008, 08:43   #3
Calgor
(Amigas && Amigos)++

Calgor's Avatar
 
Join Date: Sep 2005
Location: Anrea
Posts: 999
And another way is to use the Advanced Amiga Analyzer (look up the Amiga Hardware website). There is also a software disk for this which can be used without the hardware.

The hardware will also show the voltage levels on some of the pins, which are required for some devices. Instead of that hardware, you could very carefully use a multimeter (if you have experience) or an external serial device which requires that power. The amiga owners manual should say which voltage is expected on which pins.
Calgor is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Direct serial port read/write demolition Coders. Asm / Hardware 6 23 March 2013 03:59
Serial Port Questions iainnitro support.Hardware 10 21 April 2012 16:03
Serial Port <--> Tablet: no communication ral-clan support.WinUAE 0 02 February 2011 19:51
Serial Port Emulation; 9-bit mode Borg_Number_One support.WinUAE 14 04 August 2006 18:17
Lightgun with serial port cebulba support.Hardware 1 10 December 2003 14:05

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 23:02.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Page generated in 0.12392 seconds with 13 queries