DivX Codec and WinUAE

Ian · 09 March 2002, 19:28

While recording with th DivX Codec, WinUAE throws up and this error message when it quits: -

The instruction at "0x050bb6bb" referenced memory at "0x051e4270". The momory could not be "read".

Click OK to terminate the program.

Then there is another the same but with different memory addresses.

Anyone else have this, or is it something to do with my system??

This problem only happens with the DivX codec.

jmmijo · 09 March 2002, 20:06

You are using this codec inside WinUAE? I wasn't aware of one for the Amiga only a Windows box. Can you point me to this Ian as I have the one for Windows.

Ian · 09 March 2002, 20:14

It is the Windows version

Using the output section of the latest WinUAE's

Sorry for any confusion

jmmijo · 09 March 2002, 20:27

Ah, that's a feature I've not used yet. I'll have to check it out then and see what happens

RetroMan · 09 March 2002, 20:36

Which divX codec you use ?? 3.11 or 4 ? If using 4, try to degrade to 3.11, I´ve got problems with divX4 when reading out some DVDs

RCK · 09 March 2002, 22:28

Message by Ian:

I'm using the latest DivX 5 codec.

Maybe that's the problem

RetroMan · 09 March 2002, 22:35

Hey @Ian

Did you "UPGRADE" yourself

??? In the postings listing the last post is supposed to be from you and here the last post is from RCK !! Any unrevealed Bugs here ???

RCK · 09 March 2002, 22:37

shuuuut

I'm on it.

Ian · 09 March 2002, 22:40

Maybe RCK log's in as Ian1 and uses the password ******1 in honour of me

Anyway I enjoyed my brief stay in France, but I'm glad to be back home now

RCK · 09 March 2002, 22:43

anyway I'm also only using the Divx5, so no prob !

this is my response and also the Ian one

10 March 2002, 13:38

Well, from three installations so far I am of the conclusion that DivX5 is as buggy as an insect circus.

Ditch it and go back to 4.11 un till they release an updated version.

Ian · 10 March 2002, 18:57

I was using that Codec before I got 5, still had the same problem, I think it's a WinUAE problem not the Codec.

RetroMan · 10 March 2002, 21:54

Hmm, I just tested DivX 4.0 with R1 of latest WinUAE and your CD³² Config @Ian and it works really well

Ian · 10 March 2002, 21:58

It works well for me too, the problems come when I try to close WinUAE, the actual output is working fine.

Hmm, it's interesting that my opther config works fine with it, the only real difference is the size of memory I use, normally I use 8 mb chip mem, my CD32 config only uses 2 mb chip mem.

Well, I'm off to do some testing

After some testing

No problem's still there no matter what config I use.

09 March 2002, 19:28	#1
Ian Global Moderator Join Date: May 2001 Location: Derby, UK Age: 46 Posts: 2,299	DivX Codec and WinUAE While recording with th DivX Codec, WinUAE throws up and this error message when it quits: - The instruction at "0x050bb6bb" referenced memory at "0x051e4270". The momory could not be "read". Click OK to terminate the program. Then there is another the same but with different memory addresses. Anyone else have this, or is it something to do with my system?? This problem only happens with the DivX codec.

09 March 2002, 20:14	#3
Ian Global Moderator Join Date: May 2001 Location: Derby, UK Age: 46 Posts: 2,299	Hehe It is the Windows version Using the output section of the latest WinUAE's Sorry for any confusion

10 March 2002, 21:58	#14
Ian Global Moderator Join Date: May 2001 Location: Derby, UK Age: 46 Posts: 2,299	Hmm It works well for me too, the problems come when I try to close WinUAE, the actual output is working fine. Hmm, it's interesting that my opther config works fine with it, the only real difference is the size of memory I use, normally I use 8 mb chip mem, my CD32 config only uses 2 mb chip mem. Well, I'm off to do some testing After some testing No problem's still there no matter what config I use. Last edited by Ian; 10 March 2002 at 22:24.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crash when selecting Sound Codec	Ultron	support.WinUAE	8	21 November 2006 17:29
Amiga 1200 and playing divx	wlcina	support.Apps	19	21 February 2005 19:38
DivX output missing	manicx	support.WinUAE	2	15 September 2004 20:01
DivX Playback	Echo	support.Hardware	10	24 January 2003 18:45
How can I get a MP3 codec to work with WinUAE output?	Blaze	support.WinUAE	1	22 December 2002 16:20

09 March 2002, 20:06	#2
jmmijo Junior Member Join Date: Jan 2002 Location: PDX Age: 62 Posts: 2,396	You are using this codec inside WinUAE? I wasn't aware of one for the Amiga only a Windows box. Can you point me to this Ian as I have the one for Windows.

09 March 2002, 20:27	#4
jmmijo Junior Member Join Date: Jan 2002 Location: PDX Age: 62 Posts: 2,396	Ah, that's a feature I've not used yet. I'll have to check it out then and see what happens

09 March 2002, 20:36	#5
RetroMan Registered User Join Date: Aug 2001 Location: Germany Age: 51 Posts: 3,704	Which divX codec you use ?? 3.11 or 4 ? If using 4, try to degrade to 3.11, I´ve got problems with divX4 when reading out some DVDs

09 March 2002, 22:28	#6
RCK Administrator Join Date: Feb 2001 Location: Paris / France Age: 46 Posts: 3,099	Message by Ian: I'm using the latest DivX 5 codec. Maybe that's the problem

09 March 2002, 22:35	#7
RetroMan Registered User Join Date: Aug 2001 Location: Germany Age: 51 Posts: 3,704	Hey @Ian Did you "UPGRADE" yourself ??? In the postings listing the last post is supposed to be from you and here the last post is from RCK !! Any unrevealed Bugs here ???

09 March 2002, 22:37	#8
RCK Administrator Join Date: Feb 2001 Location: Paris / France Age: 46 Posts: 3,099	shuuuut I'm on it.

09 March 2002, 22:40	#9
Ian Global Moderator Join Date: May 2001 Location: Derby, UK Age: 46 Posts: 2,299	Maybe RCK log's in as Ian1 and uses the password ******1 in honour of me Anyway I enjoyed my brief stay in France, but I'm glad to be back home now

09 March 2002, 22:43	#10
RCK Administrator Join Date: Feb 2001 Location: Paris / France Age: 46 Posts: 3,099	anyway I'm also only using the Divx5, so no prob ! this is my response and also the Ian one

10 March 2002, 13:38	#11
filobeddo Posts: n/a	Well, from three installations so far I am of the conclusion that DivX5 is as buggy as an insect circus. Ditch it and go back to 4.11 un till they release an updated version.

10 March 2002, 18:57	#12
Ian Global Moderator Join Date: May 2001 Location: Derby, UK Age: 46 Posts: 2,299	I was using that Codec before I got 5, still had the same problem, I think it's a WinUAE problem not the Codec.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

10 March 2002, 21:54	#13
RetroMan Registered User Join Date: Aug 2001 Location: Germany Age: 51 Posts: 3,704	Hmm, I just tested DivX 4.0 with R1 of latest WinUAE and your CD³² Config @Ian and it works really well